ipw2200, wpa_supplicant

To: debian-user-german@lists.debian.org
Subject: ipw2200, wpa_supplicant
From: Peter Meier <Peter.Meier998@gmx.de>
Date: Sat, 29 Oct 2005 12:16:29 +0200
Message-id: <[🔎] 43634BFD.8050502@gmx.de>
Reply-to: Peter.Meier998@gmx.de
Hallo zusammen,

ich versuche mit wpa_supplicant und ipw2200 meinen Laptop an das WLAN
anzuschließen.
Das WLAN ist WPA-PSK verschlüsselt.
Leider komme ich beim Starten von wpa_supplicant keine Verbindung.

Könnte Ihr mir weiterhelfen?

Grüße
  Peter


> ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0
> eapol_version=1 ap_scan=1 fast_reauth=1 ### Associate with any open
> access point ### Scans/ESSID changes can be done with wpa_cli
> network={ ssid="Sonne" key_mgmt=NONE key_mgmt=WPA-PSK
> psk="AjVC1W9e7TQnjqwEibZxWFzHsaGZHIN2Ia5hqG7SnAptpSSxZI8ge0D2eTW1ANq" } 



> State: SCANNING -> ASSOCIATING
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> Setting authentication timeout: 5 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> Wireless event: cmd=0x8b1a len=18
> Authentication with 00:00:00:00:00:00 timed out.
> BSSID 00:00:00:00:00:00 blacklist count incremented to 4
> State: ASSOCIATING -> DISCONNECTED
> No keys have been configured - skip key clearing
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> Setting scan request: 0 sec 0 usec
> State: DISCONNECTED -> SCANNING
> Starting AP scan (broadcast SSID)
> Scan timeout - try to get results
> Received 271 bytes of scan results (1 BSSes)
> Scan results: 1
> Selecting BSS from priority group 0
> 0: 00:01:e3:0b:5b:32 ssid='Sonne' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
>    selected
> Trying to associate with 00:01:e3:0b:5b:32 (SSID='Sonne' freq=0 MHz)
> Cancelling scan request
> WPA: clearing own WPA/RSN IE
> Automatic auth_alg selection: 0x1
> wpa_driver_ipw_set_auth_alg: auth_alg=0x1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> WPA: using IEEE 802.11i/D3.0
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
> 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> WPA: clearing AP RSN IE
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
> 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_ipw_set_drop_unencrypted: enabled=1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> State: SCANNING -> ASSOCIATING
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> Setting authentication timeout: 5 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> Wireless event: cmd=0x8b1a len=18
> Authentication with 00:00:00:00:00:00 timed out.
> BSSID 00:00:00:00:00:00 blacklist count incremented to 5
> State: ASSOCIATING -> DISCONNECTED
> No keys have been configured - skip key clearing
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> Setting scan request: 0 sec 0 usec
> State: DISCONNECTED -> SCANNING
> Starting AP scan (broadcast SSID)
> Scan timeout - try to get results
> Received 269 bytes of scan results (1 BSSes)
> Scan results: 1
> Selecting BSS from priority group 0
> 0: 00:01:e3:0b:5b:32 ssid='Sonne' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
>    selected
> Trying to associate with 00:01:e3:0b:5b:32 (SSID='Sonne' freq=0 MHz)
> Cancelling scan request
> WPA: clearing own WPA/RSN IE
> Automatic auth_alg selection: 0x1
> wpa_driver_ipw_set_auth_alg: auth_alg=0x1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> WPA: using IEEE 802.11i/D3.0
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
> 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> WPA: clearing AP RSN IE
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
> 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_ipw_set_drop_unencrypted: enabled=1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> State: SCANNING -> ASSOCIATING
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> Setting authentication timeout: 5 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> Wireless event: cmd=0x8b1a len=18
> Authentication with 00:00:00:00:00:00 timed out.
> BSSID 00:00:00:00:00:00 blacklist count incremented to 6
> State: ASSOCIATING -> DISCONNECTED
> No keys have been configured - skip key clearing
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> Setting scan request: 0 sec 0 usec
> State: DISCONNECTED -> SCANNING
> Starting AP scan (broadcast SSID)
> Scan timeout - try to get results
> Received 271 bytes of scan results (1 BSSes)
> Scan results: 1
> Selecting BSS from priority group 0
> 0: 00:01:e3:0b:5b:32 ssid='Sonne' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
>    selected
> Trying to associate with 00:01:e3:0b:5b:32 (SSID='Sonne' freq=0 MHz)
> Cancelling scan request
> WPA: clearing own WPA/RSN IE
> Automatic auth_alg selection: 0x1
> wpa_driver_ipw_set_auth_alg: auth_alg=0x1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> WPA: using IEEE 802.11i/D3.0
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
> 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> WPA: clearing AP RSN IE
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
> 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_ipw_set_drop_unencrypted: enabled=1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> State: SCANNING -> ASSOCIATING
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> Setting authentication timeout: 5 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> Wireless event: cmd=0x8b1a len=18
> Authentication with 00:00:00:00:00:00 timed out.
> BSSID 00:00:00:00:00:00 blacklist count incremented to 7
> State: ASSOCIATING -> DISCONNECTED
> No keys have been configured - skip key clearing
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> Setting scan request: 0 sec 0 usec
> State: DISCONNECTED -> SCANNING
> Starting AP scan (broadcast SSID)
> Scan timeout - try to get results
> Received 271 bytes of scan results (1 BSSes)
> Scan results: 1
> Selecting BSS from priority group 0
> 0: 00:01:e3:0b:5b:32 ssid='Sonne' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
>    selected
> Trying to associate with 00:01:e3:0b:5b:32 (SSID='Sonne' freq=0 MHz)
> Cancelling scan request
> WPA: clearing own WPA/RSN IE
> Automatic auth_alg selection: 0x1
> wpa_driver_ipw_set_auth_alg: auth_alg=0x1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> WPA: using IEEE 802.11i/D3.0
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
> 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> WPA: clearing AP RSN IE
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
> 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_ipw_set_drop_unencrypted: enabled=1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> State: SCANNING -> ASSOCIATING
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> Setting authentication timeout: 5 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> Wireless event: cmd=0x8b1a len=18
> Authentication with 00:00:00:00:00:00 timed out.
> BSSID 00:00:00:00:00:00 blacklist count incremented to 8
> State: ASSOCIATING -> DISCONNECTED
> No keys have been configured - skip key clearing
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> Setting scan request: 0 sec 0 usec
> State: DISCONNECTED -> SCANNING
> Starting AP scan (broadcast SSID)
> Scan timeout - try to get results
> Received 270 bytes of scan results (1 BSSes)
> Scan results: 1
> Selecting BSS from priority group 0
> 0: 00:01:e3:0b:5b:32 ssid='Sonne' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
>    selected
> Trying to associate with 00:01:e3:0b:5b:32 (SSID='Sonne' freq=0 MHz)
> Cancelling scan request
> WPA: clearing own WPA/RSN IE
> Automatic auth_alg selection: 0x1
> wpa_driver_ipw_set_auth_alg: auth_alg=0x1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> WPA: using IEEE 802.11i/D3.0
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
> 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> WPA: clearing AP RSN IE
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
> 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_ipw_set_drop_unencrypted: enabled=1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> State: SCANNING -> ASSOCIATING
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> Setting authentication timeout: 5 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> Wireless event: cmd=0x8b1a len=18
> Authentication with 00:00:00:00:00:00 timed out.
> BSSID 00:00:00:00:00:00 blacklist count incremented to 9
> State: ASSOCIATING -> DISCONNECTED
> No keys have been configured - skip key clearing
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> Setting scan request: 0 sec 0 usec
> State: DISCONNECTED -> SCANNING
> Starting AP scan (broadcast SSID)
> Scan timeout - try to get results
> Received 271 bytes of scan results (1 BSSes)
> Scan results: 1
> Selecting BSS from priority group 0
> 0: 00:01:e3:0b:5b:32 ssid='Sonne' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
>    selected
> Trying to associate with 00:01:e3:0b:5b:32 (SSID='Sonne' freq=0 MHz)
> Cancelling scan request
> WPA: clearing own WPA/RSN IE
> Automatic auth_alg selection: 0x1
> wpa_driver_ipw_set_auth_alg: auth_alg=0x1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> WPA: using IEEE 802.11i/D3.0
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
> 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> WPA: clearing AP RSN IE
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
> 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_ipw_set_drop_unencrypted: enabled=1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> State: SCANNING -> ASSOCIATING
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> Setting authentication timeout: 5 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> Wireless event: cmd=0x8b1a len=18
> State: ASSOCIATING -> DISCONNECTED
> No keys have been configured - skip key clearing
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> wpa_driver_ipw_set_wpa: enabled=0
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> wpa_driver_ipw_set_drop_unencrypted: enabled=0
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> wpa_driver_ipw_set_countermeasures: enabled=0
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> No keys have been configured - skip key clearing
> Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Reply to:
Follow-Ups:
- Re: ipw2200, wpa_supplicant
  - From: Georg Lohrer <debianlist@croxx.de>
- Re: ipw2200, wpa_supplicant
  - From: Stephan Seitz <nur-ab-sal@gmx.de>
Prev by Date: Dateirechte automatisch setzen (rw-rw-r--)
Next by Date: Re: Dateirechte automatisch setzen (rw-rw-r--)
Previous by thread: Re: Dateirechte automatisch setzen (rw-rw-r--)
Next by thread: Re: ipw2200, wpa_supplicant
Index(es):
- Date
- Thread