Re: Re: DVB-T Pinnacle 300i
Hallo zusammen,
um einen alten Thread aufzuwaermen: Bei mir laeuft trotz 2.6.13 kernel
und aktueller debian testing installation die Pinnacle 300i nicht
vollstaendig.
Analog geht. In Braunschweig lebend, bringt das aber nur 4 Sender in
schlechter Qualitaet.
Digital erkennt laut /var/log/messages mein System die Karte. Allerdings
muss ich manuell einige Module fuer DVB laden:
# modprobe saa7134-dvb
# modprobe i2c_algo_bit
# modprobe dvb_pll
# modprobe tveeprom
# modprobe i2c_sensor
# modprobe i2c_dev
# modprobe i2c_core
# modprobe budget_ci
Devices:
# ls -l /dev/dvb/adapter0/
total 0
crw-rw---- 1 root video 212, 4 Sep 10 10:41 demux0
crw-rw---- 1 root video 212, 5 Sep 10 10:41 dvr0
crw-rw---- 1 root video 212, 3 Sep 10 10:41 frontend0
crw-rw---- 1 root video 212, 7 Sep 10 10:41 net0
Fehlen da nicht ein audio0 und video0?
Ein scan (aus den dvb-utils) mit der mitgelieferten Braunschweiger
channels.conf scheint kein Signal zu erhaschen:
# scan /home/cfi/channels.conf -v
scanning /home/cfi/channels.conf
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 198500000 1 3 0 1 1 3 0
initial transponder 490000000 0 2 0 1 1 3 0
initial transponder 498000000 0 2 0 1 1 3 0
initial transponder 594000000 0 2 0 1 1 3 0
initial transponder 658000000 0 2 0 1 1 3 0
initial transponder 786000000 0 2 0 1 1 3 0
>>> tune to:
198500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_NONE:QAM_16:TRANSMISSI
ON_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
[..]
Hat jemand eine Idee was ich mir anschauen koennte um dem Fehler auf die
Schliche zu kommen? Alles was ich bisher gefunden habe geht davon aus,
dass scan funktioniert sobald die Hardware erkannt wurde (und eine
Antenne angeschlossen ist ;-)
Viele Gruesse,
Ingo
Hier noch ein paar Daten zum System:
# lsmod
Module Size Used by
budget_ci 14464 0
budget_core 9924 1 budget_ci
saa7146 18440 2 budget_ci,budget_core
ttpci_eeprom 2624 1 budget_core
stv0299 11912 1 budget_ci
i2c_dev 9920 0
i2c_sensor 3456 0
tveeprom 11856 0
dvb_pll 9412 0
i2c_algo_bit 9672 0
saa7134_dvb 8580 0
mt352 6916 1 saa7134_dvb
video_buf_dvb 6532 1 saa7134_dvb
dvb_core 85096 3 budget_ci,budget_core,video_buf_dvb
crc32 4352 1 dvb_core
tda1004x 16516 2 budget_ci,saa7134_dvb
firmware_class 10624 3 budget_ci,saa7134_dvb,tda1004x
saa7134 116500 1 saa7134_dvb
ipv6 270336 8
nfsd 237280 9
exportfs 6272 1 nfsd
lockd 65992 2 nfsd
sunrpc 150532 12 nfsd,lockd
lp 11908 0
af_packet 22856 2
ns558 5508 0
gameport 15560 2 ns558
snd_mpu401 6472 0
snd_mpu401_uart 7872 1 snd_mpu401
snd_rawmidi 26208 1 snd_mpu401_uart
snd_seq_device 8844 1 snd_rawmidi
parport_pc 37060 1
parport 38280 2 lp,parport_pc
pcspkr 3608 0
rtc 13560 1
tda9887 13584 0
tuner 37608 0
video_buf 22276 3 saa7134_dvb,video_buf_dvb,saa7134
v4l2_common 5824 1 saa7134
v4l1_compat 14916 1 saa7134
ir_common 8260 1 saa7134
videodev 9728 1 saa7134
shpchp 99236 0
pci_hotplug 29940 1 shpchp
generic 4420 0 [permanent]
amd74xx 14364 0 [permanent]
snd_intel8x0 34368 2
snd_ac97_codec 86908 1 snd_intel8x0
snd_pcm_oss 54752 0
snd_mixer_oss 20096 3 snd_pcm_oss
snd_pcm 95496 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 26436 1 snd_pcm
snd 57220 10
snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_intel8x0,snd_ac97
_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9952 4 saa7134,snd
snd_page_alloc 10952 2 snd_intel8x0,snd_pcm
ehci_hcd 35912 0
sg 39520 0
sr_mod 17892 0
ohci_hcd 22468 0
i2c_nforce2 6976 0
i2c_core 22032 15
budget_ci,budget_core,ttpci_eeprom,stv0299,i2c_dev,i2c_sensor,tveeprom,i2c_
algo_bit,saa7134_dvb,mt352,tda1004x,saa7134,tda9887,tuner,i2c_nforce2
tsdev 7616 0
mousedev 11872 1
evdev 9536 0
psmouse 35588 0
ide_generic 1216 0 [permanent]
ide_disk 19008 0
ide_cd 43780 0
cdrom 40544 2 sr_mod,ide_cd
forcedeth 20032 0
ext3 142856 10
jbd 61144 1 ext3
dm_mod 60860 11
ide_scsi 18180 0
sd_mod 20176 9
sata_nv 9348 5
libata 49988 1 sata_nv
usb_storage 67008 0
usbcore 127996 4 ehci_hcd,ohci_hcd,usb_storage
scsi_mod 140776 6 sg,sr_mod,ide_scsi,sd_mod,libata,usb_storage
ide_core 130856 7
generic,amd74xx,ide_generic,ide_disk,ide_cd,ide_scsi,usb_storage
raid0 8832 2
md_mod 68112 3 raid0
unix 29488 608
/var/log/messages sieht gut aus:
Sep 10 09:55:29 localhost kernel: saa7130/34: v4l2 driver version 0.2.14
loaded
Sep 10 09:55:29 localhost kernel: ACPI: PCI Interrupt 0000:05:08.0[A] ->
Link [APC3] -> GSI 18 (level, low) -> IRQ 58
Sep 10 09:55:29 localhost kernel: saa7134[0]: found at 0000:05:08.0,
rev: 1, irq: 58, latency: 32, mmio: 0xd0000000
Sep 10 09:55:29 localhost kernel: saa7134[0]: subsystem: 11bd:002d,
board: Pinnacle PCTV 300i DVB-T + PAL [card=50,insmod option]
Sep 10 09:55:29 localhost kernel: saa7134[0]: board init: gpio is c806000
Sep 10 09:55:29 localhost kernel: : chip found @ 0xc0 (saa7134[0])
Sep 10 09:55:29 localhost kernel: : Returned more than 5 bytes. It is
not a TEA5767
Sep 10 09:55:29 localhost kernel: tuner 2-0060: microtune:
companycode=3cbf part=42 rev=a4
Sep 10 09:55:29 localhost kernel: tuner 2-0060: microtune MT2050 found, OK
Sep 10 09:55:29 localhost kernel: tda9885/6/7: chip found @ 0x86
Sep 10 09:55:29 localhost kernel: saa7134[0]: i2c eeprom 00: bd 11 2d 00
f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
Sep 10 09:55:29 localhost kernel: saa7134[0]: i2c eeprom 10: 00 f0 04 04
ff 20 ff ff ff ff ff ff ff ff ff ff
Sep 10 09:55:29 localhost kernel: saa7134[0]: i2c eeprom 20: 01 40 01 02
03 ff 03 01 08 ff 00 25 ff ff ff ff
Sep 10 09:55:29 localhost kernel: saa7134[0]: i2c eeprom 30: ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff
Sep 10 09:55:30 localhost kernel: saa7134[0]: registered device video0
[v4l2]
Sep 10 09:55:30 localhost kernel: saa7134[0]: registered device vbi0
Sep 10 10:11:23 localhost -- MARK --
Sep 10 10:31:24 localhost -- MARK --
Sep 10 10:41:27 localhost kernel: saa7134[0]: pinnacle 300i dvb setup
Sep 10 10:41:27 localhost kernel: DVB: registering new adapter (saa7134[0]).
Sep 10 10:41:27 localhost kernel: DVB: registering frontend 0 (Zarlink
MT352 DVB-T)...
Sep 10 11:04:57 localhost kernel: saa7134[0]: mt352_pinnacle_init called
Sep 10 11:05:50 localhost last message repeated 20 times
Sep 10 11:07:58 localhost kernel: saa7134[0]: mt352_pinnacle_init called
Sep 10 11:31:24 localhost -- MARK --
Sep 10 11:32:11 localhost kernel: saa7134[0]: mt352_pinnacle_init called
Sep 10 11:32:42 localhost last message repeated 35 times
Sep 10 11:32:49 localhost last message repeated 6 times
Sep 10 11:41:59 localhost kernel: i2c /dev entries driver
Sep 10 11:42:10 localhost kernel: saa7146: register extension 'budget_ci
dvb'.
Sep 10 11:42:54 localhost kernel: saa7134[0]: mt352_pinnacle_init called
Sep 10 11:43:24 localhost last message repeated 34 times
Sep 10 11:43:31 localhost last message repeated 7 times
Sep 10 11:45:24 localhost last message repeated 45 times
Sep 10 11:45:35 localhost last message repeated 11 times
Reply to: