Suspend auf NX5000
Hallo zusammen,
nach der Umstellung von SuSE 9.2 auf Debian Sarge bin ich positiv
ueberrascht! Es lief irgendwie alles ziemlich glatt:-)
Allerdings bekomme ich das Problem "Suspend to ..." nicht gebacken
und finde auch keine brauchbare Anleitung. Egal wie ich suche, ich
lande immer auf SuSE-Postings mit "powersave" :-(
Ich kann zwar per
echo disk > /sys/power/state
oder
echo mem > /sys/power/state
die Kiste Schlafen legen, das Aufwecken ist mir bisher jedoch nicht
gelungen. Meiner Vermutung nach weckt der Rechner auf, das Display
bleibt jedoch dunkel. Ich wuerde mich freuen, wenn mir jemand ein
paar Tips geben koennte. Im Anschluss folgen noch einige
rechnerbezogene Angaben.
Besten Dank! MfG Th. Moritz
Anhang:
Kernel: 2.6.12-1-686
### - dmesg | grep CPU - ###
Initializing CPU#0
CPU: After generic identify, caps: a7e9fbbf 00000000 00000000
00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000
00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040
00000180 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1500MHz stepping 05
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
###
### - dmesg | grep ACPI - ###
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [C045] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.C045._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C045.C057._PRT]
ACPI: Embedded Controller [C0E7] (gpe 16)
ACPI: Power Resource [C171] (on)
ACPI: Power Resource [C188] (on)
ACPI: Power Resource [C18F] (on)
ACPI: Power Resource [C199] (on)
ACPI: Power Resource [C0E6] (on)
ACPI: PCI Interrupt Link [C0C2] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0C3] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0C4] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0C5] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0C6] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0C7] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0C8] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C0C9] (IRQs *10 11)
ACPI: Power Resource [C1FE] (off)
ACPI: Power Resource [C1FF] (off)
ACPI: Power Resource [C200] (off)
ACPI: Power Resource [C201] (off)
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ
169
ACPI wakeup devices:
ACPI: (supports S0 S3 S4 S4bios S5)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ
177
ACPI: PCI Interrupt 0000:01:0d.0[A] -> GSI 23 (level, low) -> IRQ
185
ACPI: PCI Interrupt 0000:01:0e.0[A] -> GSI 20 (level, low) -> IRQ
193
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ
169
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ
201
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ
209
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ
177
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ
185
ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 18 (level, low) -> IRQ
177
ACPI: PCI Interrupt 0000:01:06.1[A] -> GSI 18 (level, low) -> IRQ
177
ACPI: Battery Slot [C13B] (battery present)
ACPI: Battery Slot [C13A] (battery absent)
ACPI: AC Adapter [C139] (on-line)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C13D]
ACPI: Lid Switch [C13C]
ACPI: Fan [C202] (off)
ACPI: Fan [C203] (off)
ACPI: Fan [C204] (off)
ACPI: Fan [C205] (off)
ACPI: Thermal Zone [TZ1] (56 C)
ACPI: Thermal Zone [TZ2] (43 C)
ACPI: Thermal Zone [TZ3] (26 C)
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ
201
#####
--
Dank Alzheimer lerne ich dauernd neue Leute kennen!
Reply to: