Re: Kein Ton unter Totem/Xine
Hallo Markus,
Am 17.08.05 schrieb Markus Plessing <plessing@ems-wuensche.com>:
Sascha Brechenmacher schrieb:
> Das selbe Problem hab ich auch. Wenn ich dann aber alsaconf
> ausführe funktioniert es wieder. Bis ich reboote dann gibts schon
> wieder keinen Sound.
>
> Ich hab geschaut ob alsaconf irgendwelche Module/Dienste entläd oder
> dazuläd, ist aber nicht der Fall. Vor und nach alsaconf laufen die selben
> Dienste/Module.
>
> Über einen Tip wäre ich auch dankbar.
Ich hab hier grade keinen Rechner mit Sound und kann das nicht testen,
aber sie dir mal alsactl (Paket alsa-utils) an:
root@melmac: alsactl --help
Usage: alsactl <options> command
Available options:
-h,--help this help
-f,--file # configuration file
(default /var/lib/alsa/asound.state or /etc/asound.state)
-F,--force try to restore the matching controls as much as possible
-d,--debug debug mode
-v,--version print version of this program
Available commands:
store <card #> save current driver setup for one or each soundcards
to configuration file
restore<card #> load current driver setup for one or each soundcards
from configuration file
power [card #] [state] get/set power state for one or each soundcards
Also sollte für dich folgendes funktionieren ...
* Wenn die Karte funktioniert:
alsactl store
* und um das ganze wieder zu laden:
alsactl restore
Das
heißt im Klartext, dass man nach einem Reboot bzw. Neustart jedesmal
alsactl. bemühen muss oder lässt sich dass Ganze auch automatisieren
(in welcher Datei)?
Vielen Dank
Thomas
Reply to: