Re: wvdialconf erkennt Modem nicht
* On 31.07. I muttered on debian-user-german@lists.debian.org:
> > ATQ0 - quiet mode
> > ATV1 - verbose response
> > ATE1 - commands echoed
> >
> > Da sollte es immer mit OK antworten.
>
> Ja, das ist es ja, was ich nicht verstehe:
Hier mal ein Auszug von 'strace wvdialconf wvdial.conf'. Vielleicht
kann mir ja jemand sagen, was die Fehlercodes bedeuten.
TIA + Gruß
Til
open("/var/lock/LCK..ttyS0", O_RDWR|O_NONBLOCK|O_CREAT|O_EXCL|O_LARGEFILE, 0644) = 3
fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
getpid() = 862
write(3, " 862\n", 11) = 11
close(3) = 0
open("/dev/ttyS0", O_RDWR|O_NONBLOCK|O_NOCTTY|O_LARGEFILE) = 3
fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
select(4, [3], [], [], {0, 0}) = 0 (Timeout)
ioctl(3, TIOCGSERIAL, 0xbffff390) = 0
ioctl(3, TIOCSSERIAL, 0xbffff350) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_START or TCSETS, {B9600 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
write(3, "\r", 1) = 1
nanosleep({0, 10000000}, NULL) = 0
write(3, "\r", 1) = 1
nanosleep({0, 10000000}, NULL) = 0
write(3, "\r", 1) = 1
nanosleep({0, 10000000}, NULL) = 0
write(3, "\r", 1) = 1
nanosleep({0, 10000000}, NULL) = 0
write(3, "\r", 1) = 1
nanosleep({0, 10000000}, NULL) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_START or TCSETS, {B0 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B0 -opost -isig -icanon -echo ...}) = 0
ioctl(3, TIOCMGET, [TIOCM_CTS|TIOCM_DSR|0x4000]) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B0 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_START or TCSETS, {B2400 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B2400 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B2400 -opost -isig -icanon -echo ...}) = 0
nanosleep({0, 10000000}, NULL) = 0
select(4, [3], [], [], {0, 0}) = 0 (Timeout)
select(4, [3], [], [], {0, 0}) = 0 (Timeout)
nanosleep({0, 50000000}, NULL) = 0
write(3, "ATQ0 V1 E1\r", 11) = 11
write(4, "ttyS0<*1>: ", 11ttyS0<*1>: ) = 11
write(4, "ATQ0 V1 E1 -- ", 14ATQ0 V1 E1 -- ) = 14
select(4, [3], [], [], {0, 500000}) = 0 (Timeout)
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B2400 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_START or TCSETS, {B9600 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
write(4, "failed with 2400 baud, next try:"..., 42failed with 2400 baud, next try: 9600 baud) = 42
write(4, "\n", 1
) = 1
select(4, [3], [], [], {0, 0}) = 0 (Timeout)
nanosleep({0, 50000000}, NULL) = 0
write(3, "ATQ0 V1 E1\r", 11) = 11
write(4, "ttyS0<*1>: ", 11ttyS0<*1>: ) = 11
write(4, "ATQ0 V1 E1 -- ", 14ATQ0 V1 E1 -- ) = 14
select(4, [3], [], [], {0, 500000}) = 0 (Timeout)
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_START or TCSETS, {B115200 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B115200 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B115200 -opost -isig -icanon -echo ...}) = 0
write(4, "failed with 9600 baud, next try:"..., 44failed with 9600 baud, next try: 115200 baud) = 44
write(4, "\n", 1
) = 1
select(4, [3], [], [], {0, 0}) = 0 (Timeout)
nanosleep({0, 50000000}, NULL) = 0
write(3, "ATQ0 V1 E1\r", 11) = 11
write(4, "ttyS0<*1>: ", 11ttyS0<*1>: ) = 11
write(4, "ATQ0 V1 E1 -- ", 14ATQ0 V1 E1 -- ) = 14
select(4, [3], [], [], {0, 500000}) = 0 (Timeout)
write(4, "and failed too at 115200, giving"..., 36and failed too at 115200, giving up.) = 36
write(4, "\n", 1
) = 1
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B115200 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_START or TCSETS, {B2400 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B2400 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B2400 -opost -isig -icanon -echo ...}) = 0
ioctl(3, TCFLSH, 0x2) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B2400 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_START or TCSETS, {B9600 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
close(3) = 0
unlink("/var/lock/LCK..ttyS0") = 0
Reply to: