PS/2-Maus bewegt sich unter Kernel 2.6 nicht
Hallo,
Wenn ich mein Debian/Sarge mit Kernel 2.4.24 starte geht die PS/2-Maus.
Wenn ich das gleiche System mit Kernel 2.6.12 starte bewegt sie sich kein
Stück.
In /var/log/XFree86.0.log meckert XFree das es das Device /dev/psaux nicht
öffnen könnte.
Ich habe auch /dev/input/mice versucht. Geht aber aus demselben Grund nicht.
Ich habe den Kernel 2.6 selbst gebaut:
grep MOUSE /boot/config-2.6.12
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_INPORT=m
# CONFIG_MOUSE_ATIXL is not set
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_USB_MOUSE=m
CONFIG_USB_IDMOUSE=m
In dmesg findet sich:
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
lsmod sagt:
Module Size Used by
psmouse 31396 0
mga 60128 0
drm 68308 1 mga
apm 20748 0
ipv6 262848 8
ohci_hcd 21380 0
usbcore 122588 2 ohci_hcd
agpgart 35688 1 drm
dm_mod 60828 0
opl3 15980 0
sb 13060 0
sb_lib 49700 1 sb
uart401 11428 1 sb_lib
sound 80780 3 opl3,sb_lib,uart401
soundcore 9760 2 sb_lib,sound
ide_scsi 17764 0
ide_cd 43268 0
cdrom 40768 1 ide_cd
8139too 26304 0
mii 5760 1 8139too
af_packet 22248 2
lp 12228 0
parport_pc 36772 1
parport 37128 2 lp,parport_pc
genrtc 8488 0
isofs 37560 0
ide_disk 18752 8
ide_generic 1216 0 [permanent]
sis5513 16552 0 [permanent]
trm290 4260 0 [permanent]
via82cxxx 13884 0 [permanent]
triflex 3712 0 [permanent]
slc90e66 5728 0 [permanent]
siimage 12480 0 [permanent]
serverworks 9096 0 [permanent]
rz1000 2464 0 [permanent]
sc1200 7360 0 [permanent]
piix 10372 0 [permanent]
pdc202xx_old 11232 0 [permanent]
pdc202xx_new 9312 0 [permanent]
opti621 4388 0 [permanent]
hpt366 20448 0 [permanent]
ns87415 4296 0 [permanent]
hpt34x 5184 0 [permanent]
generic 3840 0 [permanent]
cy82c693 4740 0 [permanent]
cmd64x 11964 0 [permanent]
cs5520 4608 0 [permanent]
cs5530 5376 0 [permanent]
atiixp 5936 0 [permanent]
amd74xx 14428 0 [permanent]
alim15x3 12332 0 [permanent]
aec62xx 7392 0 [permanent]
ide_core 130708 29 ide_scsi,ide_cd,ide_disk,ide_generic,
sis5513,trm290,via82cxxx,triflex,slc90e66,siimage,serverworks,rz1000,sc1200,
piix,pdc202xx_old,pdc202xx_new,opti621,hpt366,ns87415,hpt34x,generic,cy82c693,
cmd64x,cs5520,cs5530,atiixp,amd74xx,alim15x3,aec62xx
sd_mod 19696 0
ata_piix 9700 0
libata 49668 1 ata_piix
scsi_mod 138824 3 ide_scsi,sd_mod,libata
unix 28016 190
ext3 142152 4
mbcache 9316 1 ext3
jbd 56984 1 ext3
Und das /etc/X11/XF86Config-4 ist eine seit Jahren bewährte Konfiguration:
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Was läuft falsch? Was muss ich machen?
Danke
Matthias
--
Don't panic
Reply to: