ppp geht nicht
Da isser.
irgendwie, mein ppp geht nicht. Ist alles korrekt konfiguriert, pon gibt
aber
pppd[1300]: Serial connection established.
pppd[1300]: Using interface ppp0
pppd[1300]: Connect: ppp0 <--> /dev/ttyS0
pppd[1300]: LCP: timeout sending Config-Requests
pppd[1300]: Connection terminated.
pppd[1300]: Receive serial link is not 8-bit clean:
pppd[1300]: Problem: all had bit 7 set to 0
pppd[1300]: Hangup (SIGHUP)
pppd[1300]: Exit.
Das Modem wird auch angesprochen, zeigt belegte Leitung. Hab alle
Protokolle ausprobiert...
Gruß Karl
Reply to: