[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [R] Using GNU R on a two box "cluster"


Dirk Eddelbuettel schrieb:
On Sun, Nov 07, 2004 at 11:42:33AM +0100, Thomas Sch?nhoff wrote:

right now I'm thinking about running R 2.0.0 on box A (Debian SID) but at the same time having access to the ressources of box B (Ubuntu Linux) regarding disk capacity, RAM, idle CPU cycles . Is there anyone of you that has already installed and administred such a tiny (home based) cluster?


Are there any recommended methods or tools to realize a two nodes cluster?

The best place to start is probably the high-level snow package which does
all clustering in userspace -- i.e. it'll work on your machines just by
pulling in the packages it needs. Moreover, as both of your machines are
Debian-based, all you need should
$ apt-get install r-cran-snow

modulo maybe deciding which communications protocol you want to use (pvm or

Another approach is to burn a dvd from the Quantian iso images (see
http://dirk.eddelbuettel.com/quantian/) and boot one machine with it (note
that there are also some tricks that help you do that without burning a dvd,
but that is still the best way to start).  You can then boot a second
machine rather easily by starting the openMosix Terminalserver that is part
of Quantian --- and you second machine can be booted off the first one
already running Quantian (provided is can boot via PXE, many recent BIOS
support this).  That gives you a two-node cluster with openMosix, and you
can start, say, two R sessions with lengthy simulations, and one should
migrate automagically to other box.

Thanks to you and Dan for response, seems like a lot to be done ;-)



Reply to: