ASUS A7N8X-E Deluxe Soundproblem: Module (snd_intel8x0) korrekt geladen, jedoch nur 1. Akkord hoerbar
korrekt geladen - nur erster Akkord hoerbar
Reply-To:
Hallo Leute,
ich suche jetzt schon seit mehreren Tage in HOWTOS und im Netz nach
einer Loesung fuer mein Problem.
Ich habe ein Asus ASUS A7N8X-E Deluxe Board mit sarge und Kernel 2.6.7.
Bei der Instalation vor 2 Wochen wurde der Kernel 2.6.6 mit den OSS
Treibern und (!) den ALSA Treibern geladen. Verwendet werden die OSS
Treiber und die tun. Komischerweise gibt es auch keine Konflikte mit
den ALSA Treibern. Ich habe Kernel 2.6.7 an meine Beduerfnisse
angepasst und wollte ALSA verwenden weil der Treiber IMHO besser ist.
Die Module werden auch korrekt geladen aber ich kann immer nur den
ersten Akkord hoeren, danach stoppt xmms oder mpg123 wieder. Erneutes
"Play" gibt wieder nur den ersten Akkord zurueck.
snd_pcm_oss 58280 0
snd_mixer_oss 19456 1 snd_pcm_oss
snd_intel8x0 29960 0
snd_ac97_codec 66948 1 snd_intel8x0
snd_pcm 94116 2 snd_pcm_oss,snd_intel8x0
snd_timer 23044 1 snd_pcm
snd_page_alloc 9864 2 snd_intel8x0,snd_pcm
snd_mpu401_uart 6784 1 snd_intel8x0
snd_rawmidi 21952 1 snd_mpu401_uart
snd_seq_device 7048 1 snd_rawmidi
snd 50020 9
snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 7648 1 snd
Ich habe mir die log Dateien angeschaut und festgestellt, dass der IRQ
#5 mehrmals vergeben wird.
lspci -vv zeigt dies:
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: Asustek Computer, Inc.: Unknown device 0c11
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at e000
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a4) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 5
Region 0: Memory at ed083000 (32-bit, non-prefetchable)
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2
AC97 Audio Controler (MCP) (rev a1)
Subsystem: Asustek Computer, Inc.: Unknown device 8095
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d000
Region 1: I/O ports at d400 [size=128]
Region 2: Memory at ed080000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
ubsystem: Asustek Computer, Inc.: Unknown device 811a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ec000000 (32-bit, non-prefetchable)
Region 1: I/O ports at a000 [size=256]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
*****************************************************************************
dmesg sagt:
*****************************************************************************
[...]
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 5, pci mem f88b1000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
irq 5: nobody cared!
[...]
handlers:
[<f890a740>] (SkGeIsrOnePort+0x0/0x190 [sk98lin])
[<f89392e0>] (usb_hcd_irq+0x0/0x70 [usbcore])
Disabling IRQ #5
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
[...]
intel8x0_measure_ac97_clock: measured 49343 usecs
intel8x0: clocking to 47369
ALSA sound/pci/intel8x0.c:2822: joystick(s) found
ieee1394: Initialized config rom entry `ip1394'
Hat jemand eine Ahnung was das ist? Bzw. wie ich das Problem
loesen kann? Vielleicht hilft's den IRQ der Soundkarte auf einen
anderen zu setzten, aber wo mache ich das?
Danke
Christian
Reply to: