Re: Anfängerfrage: HiSaxmodul installieren Fritz PnP
Hallo,
Am Freitag, 09. Mai 2003, 13:59:17 +0200 schrieb frank paulsen:
> Charles Pulskens <cpulskens@naturkostvomniederrhein.de> writes:
>
> > modprobe hisax type=27 sagt mir: FritzPCI: no PCI card found
> >
> > mit modprobe hisax type=27 io=0x200 irq=3 funktioniert es!
>
> insbesondere fuer anfaenger empfiehlt sich hier die verwendung des
> programmes 'modconf'. dort ist man weniger im blindflug unterwegs.
>
Zitat aus `/usr/share/doc/isdnutils-base/README.HiSax.gz':
Card types:
Type Required parameters (in addition to type and protocol)
...
5 AVM A1 (Fritz) irq, io
...
26 AVM A1 PCMCIA (Fritz!) irq, io (set with card manager)
27 AVM PnP (Fritz!PnP) irq, io (from isapnp setup)
27 AVM PCI (Fritz!PCI) no parameter
Meiner vagen Erinnerung nach gibt `modconf' das nicht so genau an.
Gruß
Bertram
--
Bertram Scharpf
Stuttgart, Deutschland/Germany
Reply to: