pppd hängt
Hallo,
ich habe ein problem mit meiner DSL Verbindung. Ich will, dass sich mein
Server nach einem Disconnect automatisch wieder einwählt, meist macht er das
problemlos, jedoch bei ca. 30% der Versuche hängt er scheinbar in einer
Endlosschleife fest. Wenn ich den pppd daemon restarte wählt er sich sofort
wieder ein und es funktioniert wieder.
So siehts aus wenns funktioniert:
Apr 21 13:08:15 kahless -- MARK --
Apr 21 13:28:16 kahless -- MARK --
Apr 21 13:30:17 kahless pppd[353]: Terminating on signal 15.
Apr 21 13:30:17 kahless pppd[353]: Modem hangup
Apr 21 13:30:17 kahless pppd[353]: Connection terminated.
Apr 21 13:30:17 kahless pppd[353]: Connect time 1302.2 minutes.
Apr 21 13:30:17 kahless pppd[353]: Sent 79251770 bytes, received 661899478
bytes.
Apr 21 13:30:17 kahless pppd[353]: Exit.
Apr 21 13:30:22 kahless pppd[9517]: pppd 2.4.1 started by root, uid 0
Apr 21 13:30:22 kahless pppd[9517]: Serial connection established.
Apr 21 13:30:22 kahless pppd[9517]: Using interface ppp0
Apr 21 13:30:22 kahless pppd[9517]: Connect: ppp0 <--> /dev/pts/0
Apr 21 13:30:24 kahless pppd[9517]: local IP address 217.84.18.16
Apr 21 13:30:24 kahless pppd[9517]: remote IP address 217.5.98.7
Apr 21 13:30:24 kahless pppd[9517]: primary DNS address 217.237.159.1
Apr 21 13:30:24 kahless pppd[9517]: secondary DNS address 194.25.2.129
Apr 21 13:48:16 kahless -- MARK --
Apr 21 14:08:16 kahless -- MARK --
Und so wenn der pppd hängt:
Apr 14 11:56:55 kahless -- MARK --
Apr 14 12:16:55 kahless -- MARK --
Apr 14 12:26:59 kahless pppd[358]: LCP terminated by peer
Apr 14 12:26:59 kahless pppd[358]: Modem hangup
Apr 14 12:26:59 kahless pppd[358]: Connection terminated.
Apr 14 12:26:59 kahless pppd[358]: Connect time 1440.1 minutes.
Apr 14 12:26:59 kahless pppd[358]: Sent 957938730 bytes, received 596418920
bytes.
Apr 14 12:27:29 kahless pppd[358]: Serial connection established.
Apr 14 12:27:59 kahless pppd[358]: Serial connection established.
Apr 14 12:28:59 kahless last message repeated 2 times
Apr 14 12:29:59 kahless last message repeated 2 times
Vielen Dank schonmal für die Hilfe,
Klaus
---
GeekCode Version: 3.12 GU d-@ s:- a-- C++++ UL++>++++ P+ L++>++++ W++(+++)
N+ K?? w---@ PS++>+++ PE Y+ PGP+ t* 5+ X++ !R tv+(++) b+ DI D++>++++@ G++ h!
Reply to: