Re: Sedlbauer Speedfax+ und Hylafax
Markus Vetter wrote:
>
> >>>>> "Michael" == Michael Hierweck <michael@hierweck.de> writes:
> Hi Michael,
>
> >> Offenbar schlägt der AT+FCLASS=?\r Befehl fehl... Ich kenne mich mit
> >> den AT-Kommandos gar nciht aus...
>
> >Welche Kernelmodule braucht man denn dafür?
>
> >Ich habe nur das isdn- und das hisax-Modul geladen. Das isdnfax-Modul
> >bruacht man doch im Fall der Speedfax+-Karte nicht, oder?
>
> Du brauchst neben isdn und hisax noch das Sedlbauer Modul
> (CONFIG_HISAX_SEDLBAUER:)
>
> Gruß Markus
Hi!
Ja, die Option habe gesetzt...
#
# Passive ISDN cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=2
#
# HiSax supported cards
#
# CONFIG_HISAX_16_0 is not set
# CONFIG_HISAX_16_3 is not set
# CONFIG_HISAX_TELESPCI is not set
# CONFIG_HISAX_S0BOX is not set
# CONFIG_HISAX_AVM_A1 is not set
# CONFIG_HISAX_FRITZPCI is not set
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
# CONFIG_HISAX_ELSA is not set
# CONFIG_HISAX_IX1MICROR2 is not set
# CONFIG_HISAX_DIEHLDIVA is not set
# CONFIG_HISAX_ASUSCOM is not set
# CONFIG_HISAX_TELEINT is not set
# CONFIG_HISAX_HFCS is not set
CONFIG_HISAX_SEDLBAUER=y
# CONFIG_HISAX_SPORTSTER is not set
# CONFIG_HISAX_MIC is not set
# CONFIG_HISAX_NETJET is not set
# CONFIG_HISAX_NETJET_U is not set
# CONFIG_HISAX_NICCY is not set
# CONFIG_HISAX_ISURF is not set
# CONFIG_HISAX_HSTSAPHIR is not set
# CONFIG_HISAX_BKM_A4T is not set
# CONFIG_HISAX_SCT_QUADRO is not set
# CONFIG_HISAX_GAZEL is not set
# CONFIG_HISAX_HFC_PCI is not set
# CONFIG_HISAX_W6692 is not set
# CONFIG_HISAX_HFC_SX is not set
# CONFIG_HISAX_DEBUG is not set
# CONFIG_HISAX_SEDLBAUER_CS is not set
# CONFIG_HISAX_ELSA_CS is not set
# CONFIG_HISAX_ST5481 is not set
# CONFIG_HISAX_FRITZ_PCIPNP is not set
#
# Active ISDN cards
#
# CONFIG_ISDN_DRV_ICN is not set
# CONFIG_ISDN_DRV_PCBIT is not set
# CONFIG_ISDN_DRV_SC is not set
# CONFIG_ISDN_DRV_ACT2000 is not set
# CONFIG_ISDN_DRV_EICON is not set
# CONFIG_ISDN_DRV_TPAM is not set
# CONFIG_ISDN_CAPI is not set
# CONFIG_HYSDN is not set
# CONFIG_HYSDN_CAPI is not set
Es wird natürlich kein explizites Modul dafür erzeugt.
Also, irgend wie läfut das gar nciht bei mir. Ein- und ausgehende Anrufe
erscheinen zwar im Syslog, aber ansonsten...
Ich habe verscht mit minicom Modem, Fax-Gerät und T-Online anzurufen:
AT
OK
AT&E9698471
OK
ATDT<NUMMER>
BUSY
Egal mit welcher Nummer...
AT
OK
AT&E0
OK
AT+FCLASS=1
ERROR
Irgendwas ist da doch faul.
:-(
Michael
Reply to: