Re: Probleme lancement server X [was]Erreur lors mise à jour du driver nvidia

[David DUPONT <davidclaude.dupont@gmail.com>]

Bonjour,

Je ne suis pas expert dans le domaine, mais c'est un sacrée chantier ton 
xorg oO
Je serais toi je désinstallerais le driver NVidia ferais une copie de 
sauvegarde de mon fichier xorg.conf puis en supprimerais un.
Puis réinstallation.
Car à vue d'oeil, ce xorg.conf n'est pas un xorg.conf généré par une 
installation de pilote NVidia proprio.

Cordialement

Le 03.12.2009 09:51, Yo machine a écrit :
> Bonjour à tous
>
>    
> > Non. Je te suggérais deux choses : nous envoyer le fichier de config qui
> > va avec le fichier de log.
> >      
> Voici le xorg.config qui ne marche pas :
>
> # /etc/X11/xorg.conf (xorg X Window System server configuration file)
> #
> # This file was generated by dexconf, the Debian X Configuration tool,
> using
> # values from the debconf database.
> #
> # Edit this file with caution, and see the /etc/X11/xorg.conf manual
> page.
> # (Type "man /etc/X11/xorg.conf" at the shell prompt.)
> #
> # This file is automatically updated on xserver-xorg package upgrades
> *only*
> # if it has not been modified since the last upgrade of the xserver-xorg
> # package.
> #
> # If you have edited this file but would like it to be automatically
> updated
> # again, run the following command:
> #   sudo dpkg-reconfigure -phigh xserver-xorg
>
> Section "Files"
> # local font server
> # if the local font server has problems, we can fall back on these
>      FontPath        "unix/:7100"
>      FontPath        "/usr/lib/X11/fonts/misc"
>      FontPath        "/usr/lib/X11/fonts/cyrillic"
>      FontPath        "/usr/lib/X11/fonts/100dpi/:unscaled"
>      FontPath        "/usr/lib/X11/fonts/75dpi/:unscaled"
>      FontPath        "/usr/lib/X11/fonts/Type1"
>      FontPath        "/usr/lib/X11/fonts/CID"
>      FontPath        "/usr/lib/X11/fonts/Speedo"
>      FontPath        "/usr/lib/X11/fonts/100dpi"
>      FontPath        "/usr/lib/X11/fonts/75dpi"
> EndSection
>
> Section "Module"
>      Load           "bitmap"
>      Load           "dbe"
>      Load           "ddc"
>      Load           "extmod"
>      Load           "freetype"
>      Load           "glx"
>      Load           "int10"
>      Load           "record"
>      Load           "speedo"
> #   Load           "type1"
>      Load           "vbe"
>      Load           "wacom"
> EndSection
>
> Section "InputDevice"
>      Identifier     "Generic Keyboard"
>      Driver         "keyboard"
>      Option         "CoreKeyboard"
>      Option         "XkbRules" "xfree86"
>      Option         "XkbModel" "logiink"
>      Option         "XkbLayout" "fr"
> EndSection
>
> Section "InputDevice"
>      Identifier     "Configured Mouse"
>      Driver         "mouse"
>      Option         "CorePointer"
>      Option         "Device" "/dev/input/mice"
>      Option         "Protocol" "ImPS/2"
>      Option         "Emulate3Buttons" "true"
>      Option         "ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
>      Driver        "wacom"
>      Identifier    "stylus"
>      Option        "Device"        "/dev/input/wacom"          # Change
> to
>
> # /dev/input/event2
>                                                        	      # for USB
>      Option        "Type"          "stylus"
>      Option	  "Mode"	  "absolute"
>      Option	  "Tilt"	  "on"
> EndSection
>
> Section "InputDevice"
>      Driver        "wacom"
>      Identifier    "eraser"
>      Option        "Device"        "/dev/input/wacom"          # Change
> to
>
> # /dev/input/event2
>                                                        	      # for USB
>      Option        "Type"          "eraser"
>      Option	  "Mode"	  "absolute"
> EndSection
>
> #Section "InputDevice"
> #   Identifier     "Cursor"
> #   Driver         "wacom"
> #   Option         "Device" 	   "/dev/input/wacom"   # USB ONLY
> #   Option         "Type" 	   "cursor"
> #   Option         "USB" 	   "on"                  # USB ONLY
> #   Option	   "Threshold"     "10"
> #   Option	   "Mode"	   "Absolute"
> #   Option	   "Twinview"      "horizontal"
> #   Option	   "ScreenNo"	   "1"
> #   Option	   "PressCurve"    "0,0,100,100"
> #   Option	   "Tilt"	   "on"
> #   Option	   "Vendor"	   "WACOM"
> #EndSection
>
> Section "InputDevice"
>      Identifier     "Pad"
>      Driver         "wacom"
>      Option         "Device" "/dev/input/wacom"   # USB ONLY
>      Option         "Type" "pad"
> #    Option         "USB" "on"                  # USB ONLY
> EndSection
>
> Section "Monitor"
>      Identifier     "Spectrum_7Vlr"
>      HorizSync       30.0 - 70.0
>      VertRefresh     50.0 - 130.0
>      Option         "DPMS"
> EndSection
>
> Section "Device"
>      Identifier     "WinFast_Graphics_Series"
>      Driver         "nvidia"
> EndSection
>
> Section "Screen"
>      Identifier     "Default Screen"
>      Device         "WinFast_Graphics_Series"
>      Monitor        "Spectrum_7Vlr"
>      DefaultDepth    24
>      Option         "TwinView"
>      Option         "SecondMonitorHorizSync" "30-80"
>      Option         "SecondMonitorVertRefresh" "50-130"
>      Option         "TwinViewOrientation" "LeftOf"
>      Option         "MetaModes"
> "1280x1024,1440x900;1024x768,1024x768;800x600,800x600;640x480,640x480;320x200,NULL"
>      Option         "ConnectedMonitor" "CRT,CRT"
>      SubSection     "Display"
>          Depth       1
>          Modes      "1280x1024" "800x600" "640x480"
>      EndSubSection
>      SubSection     "Display"
>          Depth       4
>          Modes      "1280x1024" "800x600" "640x480"
>      EndSubSection
>      SubSection     "Display"
>          Depth       8
>          Modes      "1280x1024" "800x600" "640x480"
>      EndSubSection
>      SubSection     "Display"
>          Depth       15
>          Modes      "1280x1024" "800x600" "640x480"
>      EndSubSection
>      SubSection     "Display"
>          Depth       16
>          Modes      "1280x1024" "800x600" "640x480"
>      EndSubSection
>      SubSection     "Display"
>          Depth       24
>          Modes      "1280x1024" "800x600" "640x480"
>      EndSubSection
> EndSection
>
> Section "ServerLayout"
> # ajouté pour la tablette graphire USB
>      Identifier     "Default Layout"
>      Screen         "Default Screen" 0 0
>      InputDevice    "Generic Keyboard" "CoreKeyboard"
>      InputDevice    "Configured Mouse" "CorePointer"
>      InputDevice    "Stylus" "SendCoreEvents"
>      InputDevice    "Eraser" "SendCoreEvents"
> #   InputDevice    "Cursor" "SendCoreEvents"
>      InputDevice    "Pad"    ""
> EndSection
>
>    
> > Amicalement
> >      
> Bien à vous
>    
> > David
> >      
> P'tit Louis
>
>
>