Re: Comment installer la wifi sur un IBM ThinkPad T40?
giggz a écrit :
> giggz a écrit :
>> philippe dhondt a écrit :
>>> Voici une synthèse des différentes commandes et de leurs résultats :
>>>
>>>
>>> # uname -r
>>> 2.6.26-1-686
>>>
>>> # lspci
>>> ...
>>> network controller: Intell PRO/Wireless LAN 2100 3B Mini PCI
>>>
>>> # lsmod | grep ipw2100
>>> ipw2100
>>> ieee80211
>>> firmware_class
>>>
>>> # ls -l /lib/firmware
>>> rw-r--r-- 1 root root 209190 sep 27 2004 ipw2100-1.3.fw
>>> -rw-r--r-- 1 root root 201138 sep 27 2004 ipw2100-1.3-i.fw
>>> -rw-r--r-- 1 root root 196458 sep 27 2004 ipw2100-1.3-p.fw
>>> -rw-r--r-- 1 root root 11880 mar 3 2004 LICENSE
>>>
>>> firmwares trouvés sur http://ipw2100.sourceforge.net/
>>>
>>> # iwconfig
>>> no wireless extension
>>>
>>>
>>> Contenu du fichier /etc/network/interfaces :
>>> auto lo
>>> iface lo inet loopback
>>>
>>> allow-hotplug eth0
>>> iface eth0 inet dhcp
>>>
>>> auto wlan0
>>> iface wlan0 inet dhcp
>>>
>>> # /etc/init.d/networking restart
>>> SIOCSIFADDR : No such device
>>> wlan0: ERROR while getting interface flags: No such device
>>> wlan0: ERROR while getting interface flags: No such device
>>> Bind socket to interface: No such device
>>> Failed to bring up wlan0
>>>
>>> # dmesg | grep ipw2100
>>> [ 12.377785] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver,
>>> git-1.2.2
>>> [ 12.377831] ipw2100: Copyright(c) 2003-2006 Intel Corporation
>>> [ 12.723195] ipw2100: Detected Intel PRO/Wireless 2100 Network
>>> Connection
>>> [ 12.723249] firmware: requesting ipw2100-1.3.fw
>>> [ 15.497193] ipw2100: Fatal interrupt. Scheduling firmware restart.
>>> [ 17.228069] ipw2100: eth1: Failed to start the card.
>>> [ 17.488157] ipw2100Error calling register_netdev.
>>> [ 21.180114] ipw2100: eth1: Failed to start the card.
>>> [ 24.896332] ipw2100: eth1: Failed to start the card.
>>> [ 152.268126] ipw2100: eth1: Failed to start the card.
>>> [ 156.020122] ipw2100: eth1: Failed to start the card.
>>> [ 357.664124] ipw2100: eth1: Firmware did not initialize.
>>> [ 357.664176] ipw2100: eth1: Failed to start the firmware.
>>> [ 357.664613] ipw2100: probe of 0000:02:02.0 failed with error -5
>>>
>>>
>>>
>>>
>>> @+
>>>
>>>
>>
>> bon déjà tu pux changer wlan0 en eth1...vu ce que dis les messages.
>>
>> mais bon ça n'aidera pas à faire marcher le firmware...
>>
>> bye
>>
>
> euh j'ai peut-être pas été très clair :
>
> éditer le fichier /etc/network/interfaces et modifier :
> auto wlan0
> iface wlan0 inet dhcp
>
> en
> auto eth1
> iface eth1 inet dhcp
>
as tu regardé les problèmes détaillés sur la page :
http://ipw2100.sourceforge.net/index.php
ça n'a pas l'air d'être exactement ton pb, mais bon ça peut être une piste.
bye
Reply to: