Re: Comment installer la wifi sur un IBM ThinkPad T40?
philippe dhondt a écrit :
> Voici une synthèse des différentes commandes et de leurs résultats :
>
>
> # uname -r
> 2.6.26-1-686
>
> # lspci
> ...
> network controller: Intell PRO/Wireless LAN 2100 3B Mini PCI
>
> # lsmod | grep ipw2100
> ipw2100
> ieee80211
> firmware_class
>
> # ls -l /lib/firmware
> rw-r--r-- 1 root root 209190 sep 27 2004 ipw2100-1.3.fw
> -rw-r--r-- 1 root root 201138 sep 27 2004 ipw2100-1.3-i.fw
> -rw-r--r-- 1 root root 196458 sep 27 2004 ipw2100-1.3-p.fw
> -rw-r--r-- 1 root root 11880 mar 3 2004 LICENSE
>
> firmwares trouvés sur http://ipw2100.sourceforge.net/
>
> # iwconfig
> no wireless extension
>
>
> Contenu du fichier /etc/network/interfaces :
> auto lo
> iface lo inet loopback
>
> allow-hotplug eth0
> iface eth0 inet dhcp
>
> auto wlan0
> iface wlan0 inet dhcp
>
> # /etc/init.d/networking restart
> SIOCSIFADDR : No such device
> wlan0: ERROR while getting interface flags: No such device
> wlan0: ERROR while getting interface flags: No such device
> Bind socket to interface: No such device
> Failed to bring up wlan0
>
> # dmesg | grep ipw2100
> [ 12.377785] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver,
> git-1.2.2
> [ 12.377831] ipw2100: Copyright(c) 2003-2006 Intel Corporation
> [ 12.723195] ipw2100: Detected Intel PRO/Wireless 2100 Network
> Connection
> [ 12.723249] firmware: requesting ipw2100-1.3.fw
> [ 15.497193] ipw2100: Fatal interrupt. Scheduling firmware restart.
> [ 17.228069] ipw2100: eth1: Failed to start the card.
> [ 17.488157] ipw2100Error calling register_netdev.
> [ 21.180114] ipw2100: eth1: Failed to start the card.
> [ 24.896332] ipw2100: eth1: Failed to start the card.
> [ 152.268126] ipw2100: eth1: Failed to start the card.
> [ 156.020122] ipw2100: eth1: Failed to start the card.
> [ 357.664124] ipw2100: eth1: Firmware did not initialize.
> [ 357.664176] ipw2100: eth1: Failed to start the firmware.
> [ 357.664613] ipw2100: probe of 0000:02:02.0 failed with error -5
>
>
>
>
> @+
>
>
bon déjà tu pux changer wlan0 en eth1...vu ce que dis les messages.
mais bon ça n'aidera pas à faire marcher le firmware...
bye
Reply to: