Re: Installation de Debian
Ben non justement, il a accès au /boot de Debian (il aurait du mal a accéder à celui du CD, il n'est plus dans le lecteur...
Et pourtant il le trouve (sinon j'aurai une erreur 15 ou 22, je ne sais plus :s)
Le 04/12/07, Thierry Leurent <thierry.leurent@asgardian.be> a écrit :
Lorsque tu "initialises" grub à partir de ta knoppix, le /boot auquel il a
acces est celui du CD ? Je me demande si il ne faudrait pas le forcer à
utiliser celui de ta débian.
Comme tu le fais pour /proc.
Arnaud FELTZ a écrit :
> Qu'entends tu par là?
>
> Le 04/12/07, Thierry Leurent <thierry.leurent@asgardian.be> a écrit :
>>
>> Je n'ai jamais fais ce genre de manip.
>> Ne devrais-tu pas mapper le /boot aussi ?
>>
>> Arnaud FELTZ a écrit :
>> > Y a vraiment personne qui peut me dire si j'ai fais une erreur
>> quelques
>> > part
>> > ou les manipulations que je devrais faire pour faire tourner Debian?
>> > Knoppix
>> > est "bien" mais de là à l'utiliser quotidiennement, surtout pas... Et
>> > Windows n'est pas une solution envisageable...
>> >
>> > Merci
>> >
>> > Le 03/12/07, Arnaud FELTZ <linux.debutant@gmail.com
> a écrit :
>> >>
>> >> Bonjour tout le monde, j'ai, en mon sens, beaucoup progressé,
>> l'erreur
>> >> dûe
>> >> à fdisk -l était normale (concernant la table de partition non
>> valide)
>> >> vu
>> >> que cette dernière n'est pas installée sur une partition (hda1) mais
>> un
>> >> disque (hda).
>> >>
>> >> Donc voilà où en est mon système :
>> >>
>> >> |---
>> >> # fdisk -l /dev/hda
>> >>
>> >> Disque /dev/hda: 80.0 Go, 80026361856 octets
>> >> 255 têtes, 63 secteurs/piste, 9729 cylindres
>> >> Unités = cylindres de 16065 * 512 = 8225280 octets
>> >>
>> >> Périphérique Amorce Début Fin Blocs Id Système
>> >> /dev/hda1 * 1 9729 78148161 83 Linux
>> >> |---
>> >>
>> >> Je dispose donc d'une partition bootable.
>> >> Je monte ensuite ma partition hda1:
>> >>
>> >> |---
>> >> mount /dev/hda1 /media/hda1
>> >> |---
>> >>
>> >> Puis (toujours sous Knoppix), je rattache le /dev de KNOPPIX à celui
>> de
>> >> hda1 :
>> >> |---
>> >> mount -o bind /dev /media/hda1/dev
>> >> |---
>> >>
>> >> Ensuite, je me "connecte" sur ma distribution :
>> >> |---
>> >> chroot /media/hda1 /bin/bash
>> >> |---
>> >>
>> >> Je suis donc maintenant sous ma Debian, j'installe GRUB :
>> >> |---
>> >> # /usr/sbin/grub-install /dev/hda
>> >> Searching for GRUB installation directory ... found: /boot/grub
>> >> Installation finished. No error reported.
>> >> This is the contents of the device map /boot/grub/device.map.
>> >> Check if this is correct or not. If any of the lines is incorrect,
>> >> fix it and re-run the script `grub-install'.
>> >>
>> >> (fd0) /dev/fd0
>> >> (hd0) /dev/hda
>> >> (hd1) /dev/hdc
>> >> |---
>> >>
>> >> J'update grub pour qu'il intègre mon noyau dans le fichier menu.lst :
>> >> |---
>> >> # update-grub
>> >> Searching for GRUB installation directory ... found: /boot/grub
>> >> Searching for default file ... found: /boot/grub/default
>> >> Testing for an existing GRUB menu.lst file ... found:
>> >> /boot/grub/menu.lst
>> >> Searching for splash image ... none found, skipping ...
>> >> Found kernel: /boot/vmlinuz
>> >> Found kernel: /boot/vmlinuz-2.6.22-3-686
>> >> Updating /boot/grub/menu.lst ... done
>> >> |---
>> >>
>> >> Je m'assures que tout est ok ensuite :
>> >> |---
>> >> # ls -l /boot/grub/
>> >> total 184
>> >> -rw-r--r-- 1 root root 197 Dec 4 17:16 default
>> >> -rw-r--r-- 1 root root 45 Dec 4 17:01
device.map
>> >> -rw-r--r-- 1 root root 7552 Dec 4 17:16 e2fs_stage1_5
>> >> -rw-r--r-- 1 root root 7456 Dec 4 17:16 fat_stage1_5
>> >> -rw-r--r-- 1 root root 8160 Dec 4 17:16 jfs_stage1_5
>> >> -rw-r--r-- 1 root root 4143 Dec 4 17:17 menu.lst
>> >> -rw-r--r-- 1 root root 6880 Dec 4 17:16 minix_stage1_5
>> >> -rw-r--r-- 1 root root 9248 Dec 4 17:16 reiserfs_stage1_5
>> >> -rw-r--r-- 1 root root 512 Dec 4 17:16 stage1
>> >> -rw-r--r-- 1 root root 108296 Dec 4 17:16 stage2
>> >> -rw-r--r-- 1 root root 8872 Dec 4 17:16 xfs_stage1_5
>> >> |---
>> >>
>> >> Et :
>> >> |---
>> >> # grub
>> >> grub> root (hd0,0)
>> >> Filesystem type is reiserfs, partition type 0x83
>> >>
>> >> grub> setup (hd0, 0)
>> >> Checking if "/boot/grub/stage1" exists... yes
>> >> Checking if "/boot/grub/stage2" exists... yes
>> >> Checking if "/boot/grub/reiserfs_stage1_5" exists... yes
>> >> Running "embed /boot/grub/reiserfs_stage1_5 (hd0)"... 19 sectors
>> are
>> >> embedded
>> >> .
>> >> succeeded
>> >> Running "install /boot/grub/stage1 (hd0) (hd0)1+19 p
>> >> (hd0,0)/boot/grub/stage2
>> >> /boot/grub/menu.lst"... succeeded
>> >> Done.
>> >> |---
>> >>
>> >> Donc pour moi, tout me paraît OK, et pourtant, lors du reboot, j'ai
>> >> l'erreur 17...
>> >>
>> >
>>
>>
>> --
>> Thierry Leurent
>>
>> E-mail : thierry.leurent@asgardian.be
>> Website (en developpement) :
http://www.asgardian.be
>>
>>
>> --
>> Lisez la FAQ de la liste avant de poser une question :
>>
http://wiki.debian.net/?DebianFrench
>> Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
>> "Reply-To:"
>>
>> To UNSUBSCRIBE, email to
debian-user-french-REQUEST@lists.debian.org
>> with a subject of "unsubscribe". Trouble? Contact
>>
listmaster@lists.debian.org
>>
>>
>
--
Thierry Leurent
E-mail : thierry.leurent@asgardian.be
Website (en developpement) :
http://www.asgardian.be
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"
To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: