Arnaud FELTZ a écrit : > Y a vraiment personne qui peut me dire si j'ai fais une erreur > quelques part ou les manipulations que je devrais faire pour faire > tourner Debian? Knoppix est "bien" mais de là à l'utiliser > quotidiennement, surtout pas... Et Windows n'est pas une solution > envisageable... > > Merci > > Le 03/12/07, *Arnaud FELTZ* <linux.debutant@gmail.com > <mailto:linux.debutant@gmail.com>> a écrit : > > Bonjour tout le monde, j'ai, en mon sens, beaucoup progressé, > l'erreur dûe à fdisk -l était normale (concernant la table de > partition non valide) vu que cette dernière n'est pas installée > sur une partition (hda1) mais un disque (hda). > > Donc voilà où en est mon système : > > |--- > # fdisk -l /dev/hda > > Disque /dev/hda: 80.0 Go, 80026361856 octets > 255 têtes, 63 secteurs/piste, 9729 cylindres > Unités = cylindres de 16065 * 512 = 8225280 octets > > Périphérique Amorce Début Fin Blocs Id Système > /dev/hda1 * 1 9729 78148161 83 Linux > |--- > > Je dispose donc d'une partition bootable. > Je monte ensuite ma partition hda1: > > |--- > mount /dev/hda1 /media/hda1 > |--- > > Puis (toujours sous Knoppix), je rattache le /dev de KNOPPIX à > celui de hda1 : > |--- > Je ne sais pas si ça changera quoi que ce soit mais tu peux aussi faire : mount -t proc none /media/hda1/proc > mount -o bind /dev /media/hda1/dev > |--- > > Ensuite, je me "connecte" sur ma distribution : > |--- > chroot /media/hda1 /bin/bash > |--- > > Je suis donc maintenant sous ma Debian, j'installe GRUB : > |--- > # /usr/sbin/grub-install /dev/hda > Searching for GRUB installation directory ... found: /boot/grub > Installation finished. No error reported. > This is the contents of the device map /boot/grub/device.map. > Check if this is correct or not. If any of the lines is incorrect, > fix it and re-run the script `grub-install'. > > (fd0) /dev/fd0 > (hd0) /dev/hda > (hd1) /dev/hdc > |--- > > J'update grub pour qu'il intègre mon noyau dans le fichier menu.lst : > |--- > # update-grub > Searching for GRUB installation directory ... found: /boot/grub > Searching for default file ... found: /boot/grub/default > Testing for an existing GRUB menu.lst file ... found: > /boot/grub/menu.lst > Searching for splash image ... none found, skipping ... > Found kernel: /boot/vmlinuz > Found kernel: /boot/vmlinuz-2.6.22-3-686 > Updating /boot/grub/menu.lst ... done > |--- > > Je m'assures que tout est ok ensuite : > |--- > # ls -l /boot/grub/ > total 184 > -rw-r--r-- 1 root root 197 Dec 4 17:16 default > -rw-r--r-- 1 root root 45 Dec 4 17:01 device.map > -rw-r--r-- 1 root root 7552 Dec 4 17:16 e2fs_stage1_5 > -rw-r--r-- 1 root root 7456 Dec 4 17:16 fat_stage1_5 > -rw-r--r-- 1 root root 8160 Dec 4 17:16 jfs_stage1_5 > -rw-r--r-- 1 root root 4143 Dec 4 17:17 menu.lst > -rw-r--r-- 1 root root 6880 Dec 4 17:16 minix_stage1_5 > -rw-r--r-- 1 root root 9248 Dec 4 17:16 reiserfs_stage1_5 > -rw-r--r-- 1 root root 512 Dec 4 17:16 stage1 > -rw-r--r-- 1 root root 108296 Dec 4 17:16 stage2 > -rw-r--r-- 1 root root 8872 Dec 4 17:16 xfs_stage1_5 > |--- > > Et : > |--- > # grub > grub> root (hd0,0) > Filesystem type is reiserfs, partition type 0x83 > > grub> setup (hd0, 0) > Checking if "/boot/grub/stage1" exists... yes > Checking if "/boot/grub/stage2" exists... yes > Checking if "/boot/grub/reiserfs_stage1_5" exists... yes > Running "embed /boot/grub/reiserfs_stage1_5 (hd0)"... 19 sectors > are embedded > . > succeeded > Running "install /boot/grub/stage1 (hd0) (hd0)1+19 p > (hd0,0)/boot/grub/stage2 > /boot/grub/menu.lst"... succeeded > Done. > |--- > > Donc pour moi, tout me paraît OK, et pourtant, lors du reboot, > j'ai l'erreur 17... > Il faudrait lancer un grub sur disquette ou cd bootable et voir comment il voit la géométrie du disque : geometry (hd0) dans le grub shell. Peut être que la géométrie vue par grub au moment du boot ne correspond pas à celle de la table de partition... Si c'est ça on cherchera une solution.
Attachment:
signature.asc
Description: OpenPGP digital signature