[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: plus de son après SUSPEND



Serge Cavailles a écrit :
> Bonjour,
>
> J'ai installé Etch ces jours ci depuis un CD netinstall sur un portable 
> Toshiba Satellite P200-12W (Intel® Pentium Core™ Duo T2080 à 1.73 GHz).
>
> La mise en oeuvre des possibilités d'économie d'énergie est importante pour 
> cette machine destinée à une installation personnelle solaire non raccordée 
> au réseau EDF.
>
> Pour le choix des paquets, j'ai laissé faire l'installeur avec le profil 
> portable. 
>
> Au début j'ai du son (lecture d'un .avi).
> A ma surprise, sous KDE, j'ai du activer l'ACPI pour pouvoir disposer des 
> options suspend2ram/2hd. Est-ce normal, ou faut-il y voir un lien avec mon 
> problème?
>
> Toujours est-il qu'un fois activée l'une ou  l'autre des options 
> suspend2ram/suspend2hd, je n'ai plus de son au réveil du système. Il suffit 
> de relancer alsaconf en validant les options proposées pour retrouver le 
> son, mais pour l'usage d'un primo utilisateur de PC curieux des vertus du 
> pingouin, j'aurai bien aimé pouvoir lui proposer un truc plus propre. :/
>   
Ou plus précisément de recharger les modules de la carte son et alsa...
> Le problème est indépendant du gestionnaire de fenêtre (testé avec KDE et 
> Gnome) et des applis de lecture utilisées (Mplayer, Noatun, Totem). Il 
> existe aussi avec un fichier wav et RythmBox.
>
>
> Des recherches sur le web m'ont amené à envisager un problème lié à l'ACPI, 
> ce qui m'a conduit à tenter ce qui est expliqué ici: 
> http://gentoo-wiki.com/HOWTO_Fix_Common_ACPI_Problems
>   
Tu n'étais pas loin dutout :
http://gentoo-wiki.com/HOWTO_Software_Suspend_v2#Modules_and_Startup_scripts
Bon ça c'est pour le suspend2hd et ça fonctionne parfaitement sur mon
portable, je n'ai pas essayé mais il me semble qu'il existe des
mécanismes assez proches pour le suspend2ram (peut-être même un fichier
de conf commun).
> J'ai donc vérifié la DSDT en décompilant et recompilant la DSDT avec iasl: 
> Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 58 Optimizations 
>
> L'étape suivante conseillée dans ce cas est de vérifier si des mentions au 
> système d'exploitation existent dans l'asl. La page citée précédemment 
> parle de nombre de lettres du nom. Rien de tel dans mon cas, mais on trouve  
> cependant:
>
>   
>>   If (CondRefOf (_OSI, Local0))
>>   {
>>      If (_OSI ("Linux"))
>>      {
>>         Store (0x03E8, OSYS)
>>         Store (Zero, ECDY)
>>      }
>>
>>      If (_OSI ("Windows 2001"))
>>      {
>>         Store (0x07D1, OSYS)
>>      }
>>
>>      If (_OSI ("Windows 2001 SP1"))
>>      {
>>         Store (0x07D1, OSYS)
>>                                         }
>>      If (_OSI ("Windows 2001 SP2"))
>>      {
>>         Store (0x07D2, OSYS)
>>      }
>>
>>      If (_OSI ("Windows 2006"))
>>      {
>>         Store (0x07D6, OSYS)
>>      }
>>
>>      If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))
>>      {
>>         TRAP (0x3D)
>>      }
>>   }
>>
>>   If (LGreaterEqual (OSYS, 0x07D0))
>>   {
>>      Store (One, PRM0)
>>      If (LGreaterEqual (OSYS, 0x07D1))
>>      {
>>         Store (0x03, PRM0)
>>      }
>>   }
>>   Else
>>   {
>>      Store (Zero, PRM0)
>>   }
>>     
>
> Je ne sais ce que représentent ces variables (OSYS, ECDY, PRM0) ni si je 
> peux les modifier (mettre OSYS==0x07D6) sans risque pour le matériel. 
> Peut-il y avoir des raisons valables à cette différenciation d'OS?
>
>
> Par ailleurs, il existe une mise à jour du Bios chez le constructeur, mais 
> comme ça fonctionne sous Vista, à moins d'une suppression de la 
> différenciation des valeurs dans la DSDT (hum!), je ne suis pas convaincu 
> que ça change quelque chose. 
>
> En fait je ne suis d'ailleurs même pas certain d'être sur la bonne piste. :D
>
> Un lsmod avant et après le suspend n'affiche pas de différences.
> Pas de messages particuliers dans le syslog à la reprise.
>
> Une idée?
>
> Merci d'avance 
>
>
>
>
> # dmesg | grep [AP]C[PI]
> --------------------------------------------
>  BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS)
> ACPI: RSDP (v000 TOSCPL                                ) @ 0x000f75e0
> ACPI: RSDT (v001 TOSCPL TOSCPL00 0x06040000  LTP 0x00000000) @ 0x7f6877a8
> ACPI: FADT (v001 TOSCPL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fc78
> ACPI: SLIC (v001 TOSCPL TOSCPL00 0x06040000 LOHR 0x00000000) @ 0x7f68fcec
> ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe62
> ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68feca
> ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68ff02
> ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x7f68ffd8
> ACPI: MADT (v001 PTLTD           APIC   0x06040000  LTP 0x00000000) @ 
> 0x7f68ff70
> ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 0x7f688ec0
> ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 0x7f68882e
> ACPI: SSDT (v001  PmRef  Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x7f687d88
> ACPI: SSDT (v001  PmRef  Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x7f687ce2
> ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x7f6877fc
> ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20060608) @ 0x00000000
> ACPI: PM-Timer IO Port: 0x1008
> ACPI: Local APIC address 0xfee00000
> ACPI: 2 duplicate APIC table ignored.
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
> ACPI: Core revision 20060707
> ACPI: bus type pci registered
> PCI: Using MMCONFIG
> Setting up standard PCI resources
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
> PCI: Transparent bridge - 0000:00:1e.0
> PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) 
> (try 'pci=assign-busses')
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 10 devices
> PnPBIOS: Disabled by ACPI PNP
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a 
> report
> PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
> PCI: Bridge: 0000:00:1c.0
> PCI: Bridge: 0000:00:1c.1
> PCI: Bridge: 0000:00:1c.2
> PCI: Bus 7, cardbus bridge: 0000:06:04.0
> PCI: Bridge: 0000:00:1e.0
> ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
> PCI: Setting latency timer of device 0000:00:1c.2 to 64
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 177
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> PCI: Setting latency timer of device 0000:00:1c.2 to 64
> ACPI: (supports S0 S3 S4 S5)
> ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ 
> Cpu0Ist] [20060707]
> ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ 
> Cpu0Cst] [20060707]
> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ 
> Cpu1Ist] [20060707]
> ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ 
> Cpu1Cst] [20060707]
> ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 185
> PCI: Setting latency timer of device 0000:05:00.0 to 64
> ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 169
> ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> PCI: cache line size of 32 is not supported by device 0000:00:1d.7
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169]  MMIO=[dc005000-dc0057ff]  
> Max Packet=[2048]  IR/IT contexts=[4/8]
> ACPI: PCI Interrupt 0000:06:04.3[C] -> GSI 18 (level, low) -> IRQ 185
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
> pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
> pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
> pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
> ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> ACPI: Battery Slot [BAT1] (battery present)
> ACPI: AC Adapter [ACAD] (on-line)
> ACPI: Power Button (FF) [PWRF]
> ACPI: Lid Switch [LID0]
> ACPI: Power Button (CM) [PWRB]
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
> --------------------------------------------
>
> J'ai essayé 'pci=assign-busses' et 'pci=routeirq' comme conseillé, pas de 
> changement.
>
>
>
>
> #lspci -v
> --------------------------------------------
> 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT 
> Express Memory Controller Hub (rev 03)
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: bus master, fast devsel, latency 0
> 	Capabilities: [e0] Vendor Specific Information
>
> 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML 
> Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
> 	Subsystem: Toshiba America Info Systems Unknown device ff04
> 	Flags: bus master, fast devsel, latency 0, IRQ 177
> 	Memory at dc100000 (32-bit, non-prefetchable) [size=512K]
> 	I/O ports at 1800 [size=8]
> 	Memory at c0000000 (32-bit, prefetchable) [size=256M]
> 	Memory at dc200000 (32-bit, non-prefetchable) [size=256K]
> 	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
> Enable-
> 	Capabilities: [d0] Power Management version 2
>
> 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML 
> Express Integrated Graphics Controller (rev 03)
> 	Subsystem: Toshiba America Info Systems Unknown device ff04
> 	Flags: bus master, fast devsel, latency 0
> 	Memory at dc180000 (32-bit, non-prefetchable) [size=512K]
> 	Capabilities: [d0] Power Management version 2
>
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition 
> Audio Controller (rev 02)
> 	Subsystem: Toshiba America Info Systems Unknown device ff03
> 	Flags: bus master, fast devsel, latency 0, IRQ 50
> 	Memory at dc440000 (64-bit, non-prefetchable) [size=16K]
> 	Capabilities: [50] Power Management version 2
> 	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
> Enable-
> 	Capabilities: [70] Express Unknown type IRQ 0
> 	Capabilities: [100] Virtual Channel
> 	Capabilities: [130] Unknown (5)
>
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 
> 1 (rev 02) (prog-if 00 [Normal decode])
> 	Flags: bus master, fast devsel, latency 0
> 	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> 	I/O behind bridge: 00002000-00002fff
> 	Memory behind bridge: d6000000-d7ffffff
> 	Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
> 	Capabilities: [40] Express Root Port (Slot+) IRQ 0
> 	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
> Enable+
> 	Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device 
> ff00
> 	Capabilities: [a0] Power Management version 2
> 	Capabilities: [100] Virtual Channel
> 	Capabilities: [180] Unknown (5)
>
> 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 
> 2 (rev 02) (prog-if 00 [Normal decode])
> 	Flags: bus master, fast devsel, latency 0
> 	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> 	I/O behind bridge: 00003000-00003fff
> 	Memory behind bridge: d8000000-d9ffffff
> 	Prefetchable memory behind bridge: 00000000d2000000-00000000d3ffffff
> 	Capabilities: [40] Express Root Port (Slot+) IRQ 0
> 	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
> Enable+
> 	Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device 
> ff00
> 	Capabilities: [a0] Power Management version 2
> 	Capabilities: [100] Virtual Channel
> 	Capabilities: [180] Unknown (5)
>
> 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 
> 3 (rev 02) (prog-if 00 [Normal decode])
> 	Flags: bus master, fast devsel, latency 0
> 	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
> 	I/O behind bridge: 00004000-00004fff
> 	Memory behind bridge: da000000-dbffffff
> 	Prefetchable memory behind bridge: 00000000d4000000-00000000d5ffffff
> 	Capabilities: [40] Express Root Port (Slot+) IRQ 0
> 	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
> Enable+
> 	Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device 
> ff00
> 	Capabilities: [a0] Power Management version 2
> 	Capabilities: [100] Virtual Channel
> 	Capabilities: [180] Unknown (5)
>
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 
> (rev 02) (prog-if 00 [UHCI])
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: bus master, medium devsel, latency 0, IRQ 225
> 	I/O ports at 1820 [size=32]
>
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 
> (rev 02) (prog-if 00 [UHCI])
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: bus master, medium devsel, latency 0, IRQ 233
> 	I/O ports at 1840 [size=32]
>
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 
> (rev 02) (prog-if 00 [UHCI])
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: bus master, medium devsel, latency 0, IRQ 185
> 	I/O ports at 1860 [size=32]
>
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 
> (rev 02) (prog-if 00 [UHCI])
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: bus master, medium devsel, latency 0, IRQ 177
> 	I/O ports at 1880 [size=32]
>
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
> Controller (rev 02) (prog-if 20 [EHCI])
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: bus master, medium devsel, latency 0, IRQ 225
> 	Memory at dc444000 (32-bit, non-prefetchable) [size=1K]
> 	Capabilities: [50] Power Management version 2
> 	Capabilities: [58] Debug port
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 
> (prog-if 01 [Subtractive decode])
> 	Flags: bus master, fast devsel, latency 0
> 	Bus: primary=00, secondary=06, subordinate=0a, sec-latency=56
> 	I/O behind bridge: 00005000-00005fff
> 	Memory behind bridge: dc000000-dc0fffff
> 	Prefetchable memory behind bridge: 0000000088000000-0000000089ffffff
> 	Capabilities: [50] Subsystem: Toshiba America Info Systems Unknown device 
> ff00
>
> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge 
> (rev 02)
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: bus master, medium devsel, latency 0
> 	Capabilities: [e0] Vendor Specific Information
>
> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial 
> ATA Storage Controller IDE (rev 02) (prog-if 80 [Master])
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233
> 	I/O ports at <unassigned>
> 	I/O ports at <unassigned>
> 	I/O ports at <unassigned>
> 	I/O ports at <unassigned>
> 	I/O ports at 18b0 [size=16]
> 	Capabilities: [70] Power Management version 2
>
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 
> 02)
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: medium devsel, IRQ 233
> 	I/O ports at 18c0 [size=32]
>
> 04:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 
> 001c (rev 01)
> 	Subsystem: Askey Computer Corp. Unknown device 7128
> 	Flags: bus master, fast devsel, latency 0, IRQ 10
> 	Memory at d8000000 (64-bit, non-prefetchable) [size=64K]
> 	Capabilities: [40] Power Management version 2
> 	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
> Enable-
> 	Capabilities: [60] Express Legacy Endpoint IRQ 0
> 	Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
> 	Capabilities: [100] Advanced Error Reporting
> 	Capabilities: [140] Virtual Channel
>
> 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI 
> Express Fast Ethernet controller (rev 01)
> 	Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast 
> Ethernet controller
> 	Flags: bus master, fast devsel, latency 0, IRQ 185
> 	I/O ports at 4000 [size=256]
> 	Memory at da000000 (64-bit, non-prefetchable) [size=4K]
> 	[virtual] Expansion ROM at d4000000 [disabled] [size=128K]
> 	Capabilities: [40] Power Management version 2
> 	Capabilities: [48] Vital Product Data
> 	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 
> Enable-
> 	Capabilities: [60] Express Endpoint IRQ 0
> 	Capabilities: [84] Vendor Specific Information
> 	Capabilities: [100] Advanced Error Reporting
> 	Capabilities: [12c] Virtual Channel
> 	Capabilities: [148] Device Serial Number 36-81-ec-10-00-00-00-01
> 	Capabilities: [154] Power Budgeting
>
> 06:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: bus master, medium devsel, latency 168, IRQ 177
> 	Memory at dc006000 (32-bit, non-prefetchable) [size=4K]
> 	Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
> 	Memory window 0: 88000000-89fff000 (prefetchable)
> 	Memory window 1: 8a000000-8bfff000
> 	I/O window 0: 00005000-000050ff
> 	I/O window 1: 00005400-000054ff
> 	16-bit legacy interface ports at 0001
>
> 06:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 
> 1394 Host Controller (prog-if 10 [OHCI])
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: bus master, medium devsel, latency 32, IRQ 169
> 	Memory at dc005000 (32-bit, non-prefetchable) [size=2K]
> 	Memory at dc000000 (32-bit, non-prefetchable) [size=16K]
> 	Capabilities: [44] Power Management version 2
>
> 06:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card 
> Reader (SD/MMC/MS/MS PRO/xD)
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: bus master, medium devsel, latency 57, IRQ 10
> 	Memory at dc004000 (32-bit, non-prefetchable) [size=4K]
> 	Capabilities: [44] Power Management version 2
>
> 06:04.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA 
> Standard Compliant SD Host Controller (prog-if 01)
> 	Subsystem: Toshiba America Info Systems Unknown device ff00
> 	Flags: bus master, medium devsel, latency 57, IRQ 185
> 	Memory at dc005800 (32-bit, non-prefetchable) [size=256]
> 	Capabilities: [80] Power Management version 2
> --------------------------------------------
>
> Bonne journée,
>   


Attachment: signature.asc
Description: OpenPGP digital signature


Reply to: