[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

plus de son après SUSPEND



Bonjour,

J'ai installé Etch ces jours ci depuis un CD netinstall sur un portable 
Toshiba Satellite P200-12W (Intel® Pentium Core™ Duo T2080 à 1.73 GHz).

La mise en oeuvre des possibilités d'économie d'énergie est importante pour 
cette machine destinée à une installation personnelle solaire non raccordée 
au réseau EDF.

Pour le choix des paquets, j'ai laissé faire l'installeur avec le profil 
portable. 

Au début j'ai du son (lecture d'un .avi).
A ma surprise, sous KDE, j'ai du activer l'ACPI pour pouvoir disposer des 
options suspend2ram/2hd. Est-ce normal, ou faut-il y voir un lien avec mon 
problème?

Toujours est-il qu'un fois activée l'une ou  l'autre des options 
suspend2ram/suspend2hd, je n'ai plus de son au réveil du système. Il suffit 
de relancer alsaconf en validant les options proposées pour retrouver le 
son, mais pour l'usage d'un primo utilisateur de PC curieux des vertus du 
pingouin, j'aurai bien aimé pouvoir lui proposer un truc plus propre. :/

Le problème est indépendant du gestionnaire de fenêtre (testé avec KDE et 
Gnome) et des applis de lecture utilisées (Mplayer, Noatun, Totem). Il 
existe aussi avec un fichier wav et RythmBox.


Des recherches sur le web m'ont amené à envisager un problème lié à l'ACPI, 
ce qui m'a conduit à tenter ce qui est expliqué ici: 
http://gentoo-wiki.com/HOWTO_Fix_Common_ACPI_Problems

J'ai donc vérifié la DSDT en décompilant et recompilant la DSDT avec iasl: 
Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 58 Optimizations 

L'étape suivante conseillée dans ce cas est de vérifier si des mentions au 
système d'exploitation existent dans l'asl. La page citée précédemment 
parle de nombre de lettres du nom. Rien de tel dans mon cas, mais on trouve  
cependant:

>   If (CondRefOf (_OSI, Local0))
>   {
>      If (_OSI ("Linux"))
>      {
>         Store (0x03E8, OSYS)
>         Store (Zero, ECDY)
>      }
> 
>      If (_OSI ("Windows 2001"))
>      {
>         Store (0x07D1, OSYS)
>      }
>
>      If (_OSI ("Windows 2001 SP1"))
>      {
>         Store (0x07D1, OSYS)
>                                         }
>      If (_OSI ("Windows 2001 SP2"))
>      {
>         Store (0x07D2, OSYS)
>      }
> 
>      If (_OSI ("Windows 2006"))
>      {
>         Store (0x07D6, OSYS)
>      }
> 
>      If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))
>      {
>         TRAP (0x3D)
>      }
>   }
> 
>   If (LGreaterEqual (OSYS, 0x07D0))
>   {
>      Store (One, PRM0)
>      If (LGreaterEqual (OSYS, 0x07D1))
>      {
>         Store (0x03, PRM0)
>      }
>   }
>   Else
>   {
>      Store (Zero, PRM0)
>   }

Je ne sais ce que représentent ces variables (OSYS, ECDY, PRM0) ni si je 
peux les modifier (mettre OSYS==0x07D6) sans risque pour le matériel. 
Peut-il y avoir des raisons valables à cette différenciation d'OS?


Par ailleurs, il existe une mise à jour du Bios chez le constructeur, mais 
comme ça fonctionne sous Vista, à moins d'une suppression de la 
différenciation des valeurs dans la DSDT (hum!), je ne suis pas convaincu 
que ça change quelque chose. 

En fait je ne suis d'ailleurs même pas certain d'être sur la bonne piste. :D

Un lsmod avant et après le suspend n'affiche pas de différences.
Pas de messages particuliers dans le syslog à la reprise.

Une idée?

Merci d'avance 




# dmesg | grep [AP]C[PI]
--------------------------------------------
 BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS)
ACPI: RSDP (v000 TOSCPL                                ) @ 0x000f75e0
ACPI: RSDT (v001 TOSCPL TOSCPL00 0x06040000  LTP 0x00000000) @ 0x7f6877a8
ACPI: FADT (v001 TOSCPL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fc78
ACPI: SLIC (v001 TOSCPL TOSCPL00 0x06040000 LOHR 0x00000000) @ 0x7f68fcec
ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe62
ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68feca
ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68ff02
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x7f68ffd8
ACPI: MADT (v001 PTLTD           APIC   0x06040000  LTP 0x00000000) @ 
0x7f68ff70
ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 0x7f688ec0
ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 0x7f68882e
ACPI: SSDT (v001  PmRef  Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x7f687d88
ACPI: SSDT (v001  PmRef  Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x7f687ce2
ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x7f6877fc
ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20060608) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: 2 duplicate APIC table ignored.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
ACPI: Core revision 20060707
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) 
(try 'pci=assign-busses')
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a 
report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
PCI: Bridge: 0000:00:1c.1
PCI: Bridge: 0000:00:1c.2
PCI: Bus 7, cardbus bridge: 0000:06:04.0
PCI: Bridge: 0000:00:1e.0
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: (supports S0 S3 S4 S5)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ 
Cpu0Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ 
Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ 
Cpu1Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ 
Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:05:00.0 to 64
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169]  MMIO=[dc005000-dc0057ff]  
Max Packet=[2048]  IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:06:04.3[C] -> GSI 18 (level, low) -> IRQ 185
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
--------------------------------------------

J'ai essayé 'pci=assign-busses' et 'pci=routeirq' comme conseillé, pas de 
changement.




#lspci -v
--------------------------------------------
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT 
Express Memory Controller Hub (rev 03)
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: bus master, fast devsel, latency 0
	Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML 
Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
	Subsystem: Toshiba America Info Systems Unknown device ff04
	Flags: bus master, fast devsel, latency 0, IRQ 177
	Memory at dc100000 (32-bit, non-prefetchable) [size=512K]
	I/O ports at 1800 [size=8]
	Memory at c0000000 (32-bit, prefetchable) [size=256M]
	Memory at dc200000 (32-bit, non-prefetchable) [size=256K]
	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
	Capabilities: [d0] Power Management version 2

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML 
Express Integrated Graphics Controller (rev 03)
	Subsystem: Toshiba America Info Systems Unknown device ff04
	Flags: bus master, fast devsel, latency 0
	Memory at dc180000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: [d0] Power Management version 2

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition 
Audio Controller (rev 02)
	Subsystem: Toshiba America Info Systems Unknown device ff03
	Flags: bus master, fast devsel, latency 0, IRQ 50
	Memory at dc440000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
	Capabilities: [70] Express Unknown type IRQ 0
	Capabilities: [100] Virtual Channel
	Capabilities: [130] Unknown (5)

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 
1 (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: d6000000-d7ffffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+
	Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device 
ff00
	Capabilities: [a0] Power Management version 2
	Capabilities: [100] Virtual Channel
	Capabilities: [180] Unknown (5)

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 
2 (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: d8000000-d9ffffff
	Prefetchable memory behind bridge: 00000000d2000000-00000000d3ffffff
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+
	Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device 
ff00
	Capabilities: [a0] Power Management version 2
	Capabilities: [100] Virtual Channel
	Capabilities: [180] Unknown (5)

00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 
3 (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: da000000-dbffffff
	Prefetchable memory behind bridge: 00000000d4000000-00000000d5ffffff
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+
	Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device 
ff00
	Capabilities: [a0] Power Management version 2
	Capabilities: [100] Virtual Channel
	Capabilities: [180] Unknown (5)

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 
(rev 02) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: bus master, medium devsel, latency 0, IRQ 225
	I/O ports at 1820 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 
(rev 02) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: bus master, medium devsel, latency 0, IRQ 233
	I/O ports at 1840 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 
(rev 02) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: bus master, medium devsel, latency 0, IRQ 185
	I/O ports at 1860 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 
(rev 02) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: bus master, medium devsel, latency 0, IRQ 177
	I/O ports at 1880 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller (rev 02) (prog-if 20 [EHCI])
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: bus master, medium devsel, latency 0, IRQ 225
	Memory at dc444000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 
(prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=06, subordinate=0a, sec-latency=56
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: dc000000-dc0fffff
	Prefetchable memory behind bridge: 0000000088000000-0000000089ffffff
	Capabilities: [50] Subsystem: Toshiba America Info Systems Unknown device 
ff00

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge 
(rev 02)
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: bus master, medium devsel, latency 0
	Capabilities: [e0] Vendor Specific Information

00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial 
ATA Storage Controller IDE (rev 02) (prog-if 80 [Master])
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233
	I/O ports at <unassigned>
	I/O ports at <unassigned>
	I/O ports at <unassigned>
	I/O ports at <unassigned>
	I/O ports at 18b0 [size=16]
	Capabilities: [70] Power Management version 2

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 
02)
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: medium devsel, IRQ 233
	I/O ports at 18c0 [size=32]

04:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 
001c (rev 01)
	Subsystem: Askey Computer Corp. Unknown device 7128
	Flags: bus master, fast devsel, latency 0, IRQ 10
	Memory at d8000000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
	Capabilities: [60] Express Legacy Endpoint IRQ 0
	Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Virtual Channel

05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI 
Express Fast Ethernet controller (rev 01)
	Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast 
Ethernet controller
	Flags: bus master, fast devsel, latency 0, IRQ 185
	I/O ports at 4000 [size=256]
	Memory at da000000 (64-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at d4000000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 2
	Capabilities: [48] Vital Product Data
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 
Enable-
	Capabilities: [60] Express Endpoint IRQ 0
	Capabilities: [84] Vendor Specific Information
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [12c] Virtual Channel
	Capabilities: [148] Device Serial Number 36-81-ec-10-00-00-00-01
	Capabilities: [154] Power Budgeting

06:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: bus master, medium devsel, latency 168, IRQ 177
	Memory at dc006000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
	Memory window 0: 88000000-89fff000 (prefetchable)
	Memory window 1: 8a000000-8bfff000
	I/O window 0: 00005000-000050ff
	I/O window 1: 00005400-000054ff
	16-bit legacy interface ports at 0001

06:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 
1394 Host Controller (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: bus master, medium devsel, latency 32, IRQ 169
	Memory at dc005000 (32-bit, non-prefetchable) [size=2K]
	Memory at dc000000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2

06:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card 
Reader (SD/MMC/MS/MS PRO/xD)
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: bus master, medium devsel, latency 57, IRQ 10
	Memory at dc004000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2

06:04.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA 
Standard Compliant SD Host Controller (prog-if 01)
	Subsystem: Toshiba America Info Systems Unknown device ff00
	Flags: bus master, medium devsel, latency 57, IRQ 185
	Memory at dc005800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
--------------------------------------------

Bonne journée,
-- 
Serge




Reply to: