Re: probleme configuration xorg
/*
** desole par avance pour la longueur du message
*/
j'ai refait des nouveaux tests en regenerant ma config a partir d'un
`xorgconfig`, et en prenant bien le temps de tout lire.
les seuls points ou je pense que je me suis peut etre trompes sont: la
memoire video (je ne sais pas exactement combien ma carte en possede),
et le hsync / vsync, je pense avoir suivi ce qui etait mis dans la doc
constructeur (a savoir a cette adresse:
http://www.hyundaiq.com/pro_q995.asp# ).
voila le nouveau xorg.conf:
-----------------------------------
> Section "Module"
> Load "dbe" # Double buffer extension
> SubSection "extmod"
> Option "omit xfree86-dga" # don't initialise the DGA extension
> EndSubSection
> Load "type1"
> Load "freetype"
> EndSection
>
> Section "Files"
> RgbPath "/usr/X11R6/lib/X11/rgb"
> FontPath "/usr/X11R6/lib/X11/fonts/misc/"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard1"
> Driver "kbd"
> Option "AutoRepeat" "500 30"
> Option "XkbRules" "xorg"
> Option "XkbModel" "logiultrax"
> Option "XkbLayout" "us"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse1"
> Driver "mouse"
> Option "Protocol" "Auto" # Auto detect
> Option "Device" "/dev/mouse"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> Identifier "Image Quest Q995"
> HorizSync 31.5 - 82.0
> VertRefresh 50-150
> EndSection
>
> Section "Device"
> Identifier "Standard VGA"
> VendorName "Unknown"
> BoardName "Unknown"
> Driver "vga"
> EndSection
>
> Section "Device"
> Identifier "matrox g200"
> Driver "mga"
> VideoRam 16384
> EndSection
>
> Section "Screen"
> Identifier "Screen 1"
> Device "matrox g200"
> Monitor "Image Quest Q995"
> DefaultDepth 16
> Subsection "Display"
> Depth 8
> Modes "1280x1024" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 16
> Modes "1280x1024" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 24
> Modes "1280x1024" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> EndSection
>
> Section "ServerLayout"
> Screen "Screen 1"
> InputDevice "Mouse1" "CorePointer"
> InputDevice "Keyboard1" "CoreKeyboard"
> EndSection
>
et voici le Xorg.0.log qui resulte d'un essai de demarrer gdm avec
cette configuration:
> X Window System Version 6.9.0 (Debian 6.9.0.dfsg.1-4 20060114230205 David Nusinow <dnusinow@debian.org>)
> Release Date: 21 December 2005
> X Protocol Version 11, Revision 0, Release 6.9
> Build Operating System: Linux 2.6.15-1-686 i686 [ELF]
> Current Operating System: Linux smoisi..com 2.6.15-1-686 #2 Mon Mar 6 15:27:08 UTC 2006 i686
> Build Date: 14 January 2006
> Before reporting problems, check http://wiki.X.Org
> to make sure that you have the latest version.
> Module Loader present
> OS Kernel: Linux version 2.6.15-1-686 (Debian 2.6.15-8) (waldi@debian.org) (gcc version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 Mon Mar 6 15:27:08 UTC 2006
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 21 00:20:19 2006
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) | |-->Monitor "Image Quest Q995"
> (**) | |-->Device "matrox g200"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (II) Open ACPI successful (/proc/acpi/event)
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.2
> X.Org Video Driver: 0.8
> X.Org XInput driver : 0.5
> X.Org Server Extension : 0.2
> X.Org Font Renderer : 0.4
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
> (II) Module bitmap: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 1.0.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.so
> (II) Module pcidata: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.8
> (++) using VT number 7
>
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
> (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
> (II) PCI: 00:04:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
> (II) PCI: 00:04:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
> (II) PCI: 00:04:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
> (II) PCI: 00:04:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
> (II) PCI: 00:06:0: chip 1013,6003 card 1013,4280 rev 01 class 04,01,00 hdr 00
> (II) PCI: 00:0b:0: chip 10b7,9055 card 10b7,9055 rev 30 class 02,00,00 hdr 00
> (II) PCI: 01:00:0: chip 102b,0521 card 102b,ff00 rev 03 class 03,00,00 hdr 00
> (II) PCI: End of PCI scan
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) PCI-to-PCI bridge:
> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
> (II) Bus 1 non-prefetchable memory range:
> [0] -1 0 0xf4200000 - 0xf4ffffff (0xe00000) MX[B]
> (II) Bus 1 prefetchable memory range:
> [0] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B]
> (II) PCI-to-ISA bridge:
> (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
> (--) PCI:*(1:0:0) Matrox Graphics, Inc. MGA G200 AGP rev 3, Mem @ 0xf5000000/24, 0xf4200000/14, 0xf4800000/23
> (II) Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
>
> (II) Active PCI resource ranges:
> [0] -1 0 0xf4101000 - 0xf410107f (0x80) MX[B]
> [1] -1 0 0xf4000000 - 0xf40fffff (0x100000) MX[B]
> [2] -1 0 0xf4100000 - 0xf4100fff (0x1000) MX[B]
> [3] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
> [4] -1 0 0xf4800000 - 0xf4ffffff (0x800000) MX[B](B)
> [5] -1 0 0xf4200000 - 0xf4203fff (0x4000) MX[B](B)
> [6] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
> [7] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
> [8] -1 0 0x00001000 - 0x0000101f (0x20) IX[B]
> [9] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
> (II) Active PCI resource ranges after removing overlaps:
> [0] -1 0 0xf4101000 - 0xf410107f (0x80) MX[B]
> [1] -1 0 0xf4000000 - 0xf40fffff (0x100000) MX[B]
> [2] -1 0 0xf4100000 - 0xf4100fff (0x1000) MX[B]
> [3] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
> [4] -1 0 0xf4800000 - 0xf4ffffff (0x800000) MX[B](B)
> [5] -1 0 0xf4200000 - 0xf4203fff (0x4000) MX[B](B)
> [6] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
> [7] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
> [8] -1 0 0x00001000 - 0x0000101f (0x20) IX[B]
> [9] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
> (II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xf4101000 - 0xf410107f (0x80) MX[B]
> [6] -1 0 0xf4000000 - 0xf40fffff (0x100000) MX[B]
> [7] -1 0 0xf4100000 - 0xf4100fff (0x1000) MX[B]
> [8] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
> [9] -1 0 0xf4800000 - 0xf4ffffff (0x800000) MX[B](B)
> [10] -1 0 0xf4200000 - 0xf4203fff (0x4000) MX[B](B)
> [11] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
> [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [14] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
> [15] -1 0 0x00001000 - 0x0000101f (0x20) IX[B]
> [16] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
>
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
> (II) Module type1: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 1.0.2
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "freetype"
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
> (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
> compiled for 6.9.0, module version = 2.1.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
> (II) Loading font FreeType
> (II) LoadModule: "mga"
> (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.so
> (II) Module mga: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 1.2.1
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 0.8
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 1.0.3
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 0.5
> (II) LoadModule: "kbd"
> (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 1.0.1
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 0.5
> (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
> mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
> mgag550
> (II) Primary Device is: PCI 01:00:0
> (--) Assigning device section with no busID to primary device
> (--) Chipset mgag200 found
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xf4101000 - 0xf410107f (0x80) MX[B]
> [6] -1 0 0xf4000000 - 0xf40fffff (0x100000) MX[B]
> [7] -1 0 0xf4100000 - 0xf4100fff (0x1000) MX[B]
> [8] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
> [9] -1 0 0xf4800000 - 0xf4ffffff (0x800000) MX[B](B)
> [10] -1 0 0xf4200000 - 0xf4203fff (0x4000) MX[B](B)
> [11] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
> [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [14] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
> [15] -1 0 0x00001000 - 0x0000101f (0x20) IX[B]
> [16] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
> (II) resource ranges after probing:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xf4101000 - 0xf410107f (0x80) MX[B]
> [6] -1 0 0xf4000000 - 0xf40fffff (0x100000) MX[B]
> [7] -1 0 0xf4100000 - 0xf4100fff (0x1000) MX[B]
> [8] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
> [9] -1 0 0xf4800000 - 0xf4ffffff (0x800000) MX[B](B)
> [10] -1 0 0xf4200000 - 0xf4203fff (0x4000) MX[B](B)
> [11] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
> [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [17] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
> [18] -1 0 0x00001000 - 0x0000101f (0x20) IX[B]
> [19] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
> [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.so
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 0.1.0
> ABI class: X.Org Video Driver, version 0.8
> (--) MGA(0): Chipset: "mgag200"
> (II) Loading sub module "mga_hal"
> (II) LoadModule: "mga_hal"
> (II) Loading /usr/X11R6/lib/modules/drivers/mga_hal_drv.o
> (II) Module mga_hal: vendor="Matrox Graphics Inc. - Release v4.3.0"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.7
> (==) MGA(0): Matrox HAL module used
> (**) MGA(0): Depth 16, (--) framebuffer bpp 16
> (==) MGA(0): RGB weight 565
> (==) MGA(0): Using AGP 1x mode
> (--) MGA(0): Linear framebuffer at 0xF5000000
> (--) MGA(0): MMIO registers at 0xF4200000
> (--) MGA(0): Pseudo-DMA transfer window at 0xF4800000
> (==) MGA(0): BIOS at 0xC0000
> (--) MGA(0): Video BIOS info block at offset 0x07540
> (**) MGA(0): VideoRAM: 16384 kByte
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.so
> (II) Module ddc: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.8
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Loading /usr/X11R6/lib/modules/libi2c.so
> (II) Module i2c: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 1.2.0
> ABI class: X.Org Video Driver, version 0.8
> (==) MGA(0): Write-combining range (0xf5000000,0x1000000)
> (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
> (II) MGA(0): I2C bus "DDC P1" initialized.
> (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
> (II) MGA(0): I2C device "DDC P1:ddc2" removed.
> (II) MGA(0): I2C Monitor info: (nil)
> (II) MGA(0): end of I2C Monitor info
> (--) MGA(0): No DDC signal
> (II) MGA(0): DDC Monitor info: (nil)
> (II) MGA(0): end of DDC Monitor info
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Loading /usr/X11R6/lib/modules/libvbe.so
> (II) Module vbe: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 1.1.0
> ABI class: X.Org Video Driver, version 0.8
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/linux/libint10.so
> (II) Module int10: vendor="X.Org Foundation"
> compiled for 6.9.0, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.8
> (II) MGA(0): initializing int10
> (II) MGA(0): Primary V_BIOS segment is: 0xc000
> (II) MGA(0): VESA BIOS detected
> (II) MGA(0): VESA VBE Version 2.0
> (II) MGA(0): VESA VBE Total Mem: 8192 kB
> (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
> (II) MGA(0): VESA VBE OEM Software Rev: 1.7
> (II) MGA(0): VESA VBE OEM Vendor: Matrox
> (II) MGA(0): VESA VBE OEM Product: MGA-G200
> (II) MGA(0): VESA VBE OEM Product Rev: 00
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/X11R6/lib/modules/libddc.so
> (II) MGA(0): VESA VBE DDC supported
> (II) MGA(0): VESA VBE DDC Level 2
> (II) MGA(0): VESA VBE DDC transfer in appr. 1 sec.
> (II) MGA(0): VESA VBE DDC read successfully
> (II) MGA(0): VBE DDC Monitor info: 0x8280b08
> (II) MGA(0): Manufacturer: IQT Model: 2995 Serial#: 20041022
> (II) MGA(0): Year: 2004 Week: 43
> (II) MGA(0): EDID Version: 1.3
> (II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
> (II) MGA(0): Sync: Separate Composite
> (II) MGA(0): Max H-Image Size [cm]: horiz.: 35 vert.: 26
> (II) MGA(0): Gamma: 2.20
> (II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
> (II) MGA(0): First detailed timing not preferred mode in violation of standard!(II) MGA(0): redX: 0.638 redY: 0.325 greenX: 0.276 greenY: 0.596
> (II) MGA(0): blueX: 0.143 blueY: 0.066 whiteX: 0.283 whiteY: 0.297
> (II) MGA(0): Supported VESA Video Modes:
> (II) MGA(0): 720x400@70Hz
> (II) MGA(0): 640x480@75Hz
> (II) MGA(0): 800x600@75Hz
> (II) MGA(0): 1024x768@75Hz
> (II) MGA(0): 1280x1024@75Hz
> (II) MGA(0): Manufacturer's mask: 0
> (II) MGA(0): Supported Future Video Modes:
> (II) MGA(0): #0: hsize: 800 vsize 600 refresh: 85 vid: 22853
> (II) MGA(0): #1: hsize: 1024 vsize 768 refresh: 85 vid: 22881
> (II) MGA(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
> (II) MGA(0): #3: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
> (II) MGA(0): #4: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
> (II) MGA(0): Supported additional Video Mode:
> (II) MGA(0): clock: 202.5 MHz Image Size: 352 x 264 mm
> (II) MGA(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
> (II) MGA(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
> (II) MGA(0): Supported additional Video Mode:
> (II) MGA(0): clock: 40.5 MHz Image Size: 352 x 264 mm
> (II) MGA(0): h_active: 640 h_sync: 656 h_sync_end 720 h_blank_end 800 h_border: 0
> (II) MGA(0): v_active: 480 v_sync: 481 v_sync_end 484 v_blanking: 506 v_border: 0
> (II) MGA(0): Ranges: V min: 50 V max: 150 Hz, H min: 30 H max: 96 kHz,
> (II) MGA(0): Monitor name: Q995
> (II) MGA(0): end of VBE DDC Monitor info
> (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
> (==) MGA(0): Min pixel clock is 17 MHz
> (--) MGA(0): Max pixel clock is 250 MHz
> (II) MGA(0): Image Quest Q995: Using hsync range of 31.50-82.00 kHz
> (II) MGA(0): Image Quest Q995: Using vrefresh range of 50.00-150.00 Hz
> (II) MGA(0): Clock range: 17.75 to 250.00 MHz
> (WW) (640x350,Image Quest Q995) mode clock 31.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
> (WW) (640x400,Image Quest Q995) mode clock 31.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
> (WW) (720x400,Image Quest Q995) mode clock 35.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
> (WW) (640x480,Image Quest Q995) mode clock 25.2MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
> (WW) (640x480,Image Quest Q995) mode clock 31.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
> (WW) (640x480,Image Quest Q995) mode clock 31.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
> (WW) (640x480,Image Quest Q995) mode clock 36MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
> (WW) (800x600,Image Quest Q995) mode clock 36MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (WW) (800x600,Image Quest Q995) mode clock 40MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (WW) (800x600,Image Quest Q995) mode clock 50MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (WW) (800x600,Image Quest Q995) mode clock 49.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (WW) (800x600,Image Quest Q995) mode clock 56.3MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (WW) (1024x768,Image Quest Q995) mode clock 65MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (WW) (1024x768,Image Quest Q995) mode clock 75MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (WW) (1024x768,Image Quest Q995) mode clock 78.8MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (WW) (1024x768,Image Quest Q995) mode clock 94.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (WW) (1152x864,Image Quest Q995) mode clock 108MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
> (WW) (1280x960,Image Quest Q995) mode clock 108MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
> (WW) (1280x960,Image Quest Q995) mode clock 148.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "1280x960" (hsync out of range)
> (II) MGA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
> (WW) (1280x1024,Image Quest Q995) mode clock 108MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
> (WW) (1280x1024,Image Quest Q995) mode clock 135MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
> (WW) (1280x1024,Image Quest Q995) mode clock 157.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
> (II) MGA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
> (WW) (1600x1200,Image Quest Q995) mode clock 162MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (WW) (1600x1200,Image Quest Q995) mode clock 175.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (WW) (1600x1200,Image Quest Q995) mode clock 189MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
> (II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (WW) (1600x1200,Image Quest Q995) mode clock 202.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
> (II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (WW) (1600x1200,Image Quest Q995) mode clock 229.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
> (II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (WW) (1792x1344,Image Quest Q995) mode clock 204.8MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
> (II) MGA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
> (WW) (1856x1392,Image Quest Q995) mode clock 218.3MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
> (II) MGA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
> (WW) (1920x1440,Image Quest Q995) mode clock 234MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
> (II) MGA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
> (WW) (832x624,Image Quest Q995) mode clock 57.284MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
> (WW) (1280x768,Image Quest Q995) mode clock 80.14MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
> (WW) (1280x800,Image Quest Q995) mode clock 83.46MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
> (WW) (1152x768,Image Quest Q995) mode clock 64.995MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
> (WW) (1152x864,Image Quest Q995) mode clock 121.5MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
> (WW) (1400x1050,Image Quest Q995) mode clock 122MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
> (WW) (1400x1050,Image Quest Q995) mode clock 151MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
> (WW) (1400x1050,Image Quest Q995) mode clock 155.8MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
> (WW) (1400x1050,Image Quest Q995) mode clock 184MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
> (II) MGA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
> (WW) (1440x900,Image Quest Q995) mode clock 108.84MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
> (WW) (1600x1024,Image Quest Q995) mode clock 106.91MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
> (WW) (1680x1050,Image Quest Q995) mode clock 147.14MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
> (WW) (1920x1200,Image Quest Q995) mode clock 193.16MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
> (WW) (1920x1200,Image Quest Q995) mode clock 230MHz exceeds DDC maximum 0MHz
> (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
> (II) MGA(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) MGA(0): Not using default mode "1920x1200" (width too large for virtual size)
> (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
> (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
> (II) MGA(0): Not using default mode "1680x1050" (width too large for virtual size)
> (II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
> (II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
> (II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
> (II) MGA(0): Not using default mode "1440x900" (width too large for virtual size)
>
>
--
105 116 039 115 032 110 111 116 032 097
032 098 117 103 044 032 105 116 039 115
032 097 032 102 101 097 116 117 114 101
Reply to: