Re: connexion avec modem Olitec Speedcom V92
Le 12498ième jour après Epoch,
mahashakti89@wanadoo.fr écrivait:
> Arnaud CALVO a écrit :
>>
>>
>>> Jai mis 40 + 4x128 = 562 (trop petit ??, voir ta réponse plus bas)
>> 40 + 4x128 = 552, non ?
>> Sinon, je suis cette conversation avec intérêt...
>>
>
> Exact .... je retourne à l'école ....
> Jusqu'à maintenant il semblearait que MRU=576 et MTU=576
> valeurs tirées d'une doc pêchée avec Google soient les moins
> mauvaises.
Voir: http://www.faqs.org/rfcs/rfc791.html
Extrait:
Total Length is the length of the datagram, measured in octets,
including internet header and data. This field allows the length of
a datagram to be up to 65,535 octets. Such long datagrams are
impractical for most hosts and networks. All hosts must be prepared
to accept datagrams of up to 576 octets (whether they arrive whole
or in fragments). It is recommended that hosts only send datagrams
larger than 576 octets if they have assurance that the destination
is prepared to accept the larger datagrams.
The number 576 is selected to allow a reasonable sized data block to
be transmitted in addition to the required header information. For
example, this size allows a data block of 512 octets plus 64 header
octets to fit in a datagram. The maximal internet header is 60
octets, and a typical internet header is 20 octets, allowing a
margin for headers of higher level protocols.
Voilà ...
Pour ce qui est de l'overrun, je suis pas sûr mais il semble que
ifconfig peut t'aider... Mais je suis pas un spécialiste des liaisons
séries :(
Bonne chance.
/F - Qui se dit qu'il est l'heure d'aller boire l'apéro, après la
victoire de la france contre les écossais !
--
What does education often do? It makes a straight cut ditch of a
free meandering brook.
-- Henry David Thoreau
Reply to: