Hello,
je ne parviens pas à imprimer sur ports usb malgré
une compilation toute fraiche incluant le module 'printer' qui est inactif, bien
que chargé au démarrage.
Voilà pour dmesg :
Linux version 2.4.24 (root@mandrake) (gcc version 2.95.4 20011002
(Debian prerelease))
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver hub.c: new USB device 00:07.2-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x3f0/0x7304) is not claimed by any active driver. usb.c: registered new driver usblp printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7304 printer.c: v0.11: USB Printer Device Class driver hub.c: new USB device 00:07.2-2, assigned address 3 usb.c: USB device 3 (vend/prod 0x5e3/0x700) is not claimed by any active driver. usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 18 ret -110 usb-uhci.c: interrupt, status 2, frame# 1272 usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 18 ret -84 usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 18 ret -84 usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 18 ret -84 Et voilà pour /proc/usb/devices :
Product=USB UHCI Root Hub
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp S: Product=USB Storage Device I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Si quelqu'un peut m'aider j'offre une tablette de
chocolat.
Thierry
|