RE: Samba encore et toujours :(
-----Message d'origine-----
De : Nicolas Kowalski [mailto:Nicolas.Kowalski@imag.fr]
Envoyé : samedi 31 mai 2003 11:36
À : alde
Objet : RE: Samba encore et toujours :(
Comment ça impossible de supprimer le fichier ? Que te dit-il ? Quelles
sont les traces du noyau s'il y en a (via la commande dmesg) ?
--
Nicolas
bon fichier supprimé j'ai du faire une boulette (genre taper pas comme il le
faut le rp :p) un apt-get clean et le cache est vide.
Pour dmesg moi je vois rien de special...
11:35 root@AldeDebian /var/cache/apt/archives# dmesg
Linux version 2.4.20 (root@AldeDebian) (gcc version 2.95.4 20011002 (Debian
prer
elease)) #5 sam mai 31 00:53:44 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000002ef0000 (usable)
BIOS-e820: 0000000002ef0000 - 0000000002ef3000 (ACPI NVS)
BIOS-e820: 0000000002ef3000 - 0000000002f00000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
46MB LOWMEM available.
On node 0 totalpages: 12016
zone(0): 4096 pages.
zone(1): 7920 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=301
Initializing CPU#0
Detected 434.328 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 865.07 BogoMIPS
Memory: 45676k/48064k available (862k kernel code, 2004k reserved, 368k
data, 56
k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb210, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801AA PCI Bridge
PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH: IDE controller on PCI bus 00 dev f9
ICH: chipset revision 2
ICH: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 83240D3, ATA DISK drive
hdb: SAMSUNG CD-ROM SC-152C, ATAPI CD/DVD-ROM drive
hdc: WDC AC32500H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0268a84, I/O limit 4095Mb (mask 0xffffffff)
hda: 6329388 sectors (3241 MB) w/256KiB Cache, CHS=784/128/63, UDMA(33)
hdc: Disabling (U)DMA for WDC AC32500H
hdc: 4999680 sectors (2560 MB) w/128KiB Cache, CHS=4960/16/63
Partition check:
hda: hda1
hdc: hdc1 hdc2
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 56k freed
Adding Swap: 292784k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10e
ip_conntrack version 2.1 (375 buckets, 3000 max) - 292 bytes per conntrack
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI IS
APNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 01:04:44 May 31 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
ip_tables: (C) 2000-2002 Netfilter core team
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
01:00.0: 3Com PCI 3c905C Tornado at 0xc000. Vers LK1.1.16
01:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xc400. Vers LK1.1.16
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
apm: overridden by ACPI.
PPP BSD Compression module registered
PPP Deflate Compression module registered
Par contre je viens de faire un autre test :
=> dpkg -i ez-ipupdate_3.0.11b8-2_i386.deb
(Lecture de la base de données... dpkg : erreur de traitement de
ez-ipupdate_3.0.11b8-2_i386.deb (--install) :
impossible d'ouvrir le fichier contenant la liste des fichiers du paquet
« hotplug »: Erreur d'entrée/sortie
Des erreurs ont été rencontrées pendant l'exécution :
ez-ipupdate_3.0.11b8-2_i386.deb
L'exécution a été arrêtée car il y avait trop d'erreurs.
zsh: exit 1 dpkg -i ez-ipupdate_3.0.11b8-2_i386.deb
Toujours ce fameux hotplug ! Donc j'essai de supprimer et paf meme chose :
11:43 root@AldeDebian /home/alde# apt-get remove hotplug
Reading Package Lists... Done
Building Dependency Tree... Done
The following packages will be REMOVED:
hotplug
0 packages upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
Need to get 0B of archives. After unpacking 140kB will be freed.
Do you want to continue? [Y/n]
(Lecture de la base de données... dpkg : erreur de traitement de hotplug
(--remove) :
impossible d'ouvrir le fichier contenant la liste des fichiers du paquet
« hotplug »: Erreur d'entrée/sortie
Des erreurs ont été rencontrées pendant l'exécution :
hotplug
L'exécution a été arrêtée car il y avait trop d'erreurs.
E: Sub-process /usr/bin/dpkg returned an error code (1)
zsh: exit 100 apt-get remove hotplug
Si vous avez la moindre idée je prend parce que la ca devient très embettant
comme situation...
Alex.
Reply to: