ATI Rage 128

To: debian-user-french@lists.debian.org
Subject: ATI Rage 128
From: David Ulrich <dulrichlinux@yahoo.fr>
Date: Mon, 14 Apr 2003 14:55:44 +0200
Message-id: <[🔎] 67CD57AE-6E78-11D7-8D8E-0003930E1718@yahoo.fr>

Hello,

J'ai une ATI RAge 128RE (Pro je crois) sur le port PCI de mon powermac.J'ai installé la debian 2.2.20 puis j'ai recompilé mon kernel en2.4.18. Mais 'ai perdu l'accélération graphique (enfin une partie del'accélération graphique) Que dois-je faire?(je suis plutôt newbie en linux, donc si je dois installer ourecompiler mon kernel faudrait juste me spécifier ce que je dois fairede manière assez détaillée ou me filer un lien qui donne desexplications merci ;) )


ci-dessous les logs de XFree et la config de mon kernel au niveau vidéo:

(II) ATI: ATI driver (version 6.3.6) for chipsets: ati
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),

ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK(PCI),

        ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
        ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI),
        ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI),
        ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
        ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI Radeon VE (AGP)
(--) Chipset ATI Rage 128 RE (PCI) found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 0.1.0
(II) R128(0): PCI bus 0 card 13 func 0
(**) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(**) R128(0): Using framebuffer device
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 0.0.2
(--) R128(0): Chipset: "ATI Rage 128 RE (PCI)" (ChipID = 0x5245)
(--) R128(0): Linear framebuffer at 0x88000000
(--) R128(0): MMIO registers at 0x80804000
(--) R128(0): BIOS at 0x80820000
(II) R128(0): Video RAM override, using 15600 kB instead of 16384 kB
(**) R128(0): VideoRAM: 15360 kByte (128-bit SDR SGRAM 1:1)

(II) R128(0): PLL parameters: rf=2950 rd=35 min=12500 max=25000;xclk=7501

(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): CPD 200EST: Using hsync range of 55.00-63.00 kHz
(II) R128(0): CPD 200EST: Using vrefresh range of 43.00-75.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)

(II) R128(0): Not using default mode "1792x1344" (bad modeclock/interlace/doublescan)

(II) R128(0): Not using default mode "1856x1392" (hsync out of range)

(II) R128(0): Not using default mode "1856x1392" (bad modeclock/interlace/doublescan)

(II) R128(0): Not using default mode "1920x1440" (hsync out of range)

(II) R128(0): Not using default mode "1920x1440" (bad modeclock/interlace/doublescan)

(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(II) R128(0): Not using mode "640x480" (no mode of this name)
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(++) R128(0): DPI set to (100, 100)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(--) Depth 24 pixmap format is 32 bpp
modprobe: Can't locate module r128
[drm] failed to load kernel module "r128"
(II) R128(0): [drm] drmOpen failed
(EE) R128(0): [dri] DRIScreenInit failed.  Disabling DRI.
(II) R128(0): Memory manager initialized to (0,0) (1024,3840)
(II) R128(0): Reserved area from (0,768) to (1024,770)
(II) R128(0): Largest offscreen area available: 1024 x 3070
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Dashed Lines
        Scanline Image Writes
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                18 256x256 slots
                5 512x512 slots
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 3080)
(II) R128(0): Largest offscreen area available: 1024 x 3068
(**) R128(0): DPMS enabled
(II) R128(0): Direct rendering disabled
PEXExtensionInit: Couldn't open default PEX font file  Roman_M
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Configured Mouse: Core Pointer
(==) Configured Mouse: Buttons: 3
-------------------------
-------------------------
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FB_RIVA=m
CONFIG_FB_CLGEN=m
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
# CONFIG_FB_PM2_PCI is not set
CONFIG_FB_CYBER2000=m
CONFIG_FB_OF=y
CONFIG_FB_CONTROL=y
CONFIG_FB_PLATINUM=y
CONFIG_FB_VALKYRIE=y
CONFIG_FB_CT65550=y
CONFIG_FB_IMSTT=y
# CONFIG_FB_S3TRIO is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_ATY=y
# CONFIG_FB_ATY_GX is not set
CONFIG_FB_ATY_CT=y
CONFIG_FB_RADEON=y
CONFIG_FB_ATY128=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_VIRTUAL=m
CONFIG_FBCON_ADVANCED=y
CONFIG_FBCON_MFB=m
CONFIG_FBCON_CFB2=m
CONFIG_FBCON_CFB4=m
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
CONFIG_FBCON_VGA_PLANES=m
CONFIG_FBCON_VGA=m
CONFIG_FBCON_HGA=m
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FB_COMPAT_XPMAC is not set

et
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDT=m
CONFIG_WDTPCI=m
CONFIG_WDT_501=y
# CONFIG_WDT_501_FAN is not set
CONFIG_PCWATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_I810_TCO=m
CONFIG_MIXCOMWD=m
CONFIG_60XX_WDT=m
# CONFIG_W83877F_WDT is not set
CONFIG_MACHZ_WDT=m
# CONFIG_INTEL_RNG is not set
CONFIG_NVRAM=y
# CONFIG_RTC is not set
CONFIG_DTLK=m
# CONFIG_R3964 is not set
CONFIG_APPLICOM=m


merci ;)

--
To UNSUBSCRIBE, email to debian-user-french-request@lists.debian.org

with a subject of "unsubscribe". Trouble? Contactlistmaster@lists.debian.org

Reply to:

Follow-Ups:
- Re: ATI Rage 128
  - From: Georges Roux <georges.roux@pacageek.org>

Prev by Date: fluxbox - deplacement de fenetres
Next by Date: Re: Installation de NUT
Previous by thread: Re: fluxbox - deplacement de fenetres
Next by thread: Re: ATI Rage 128
Index(es):
- Date
- Thread