installation graveur
Bonsoir la liste,
Je désire installer mon graveur.
Quand je lance la commande ci-après, j'ai la réponse suivante:
debian:/etc/modutils# cdrecord -scanbus
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
cdrecord: No such file or directory. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you
are root.
Pourtant:
1- Le paquet cdrecord est installé.
2- J'ai édité un fichier /etc/modutils/graveur que voici:
debian:/etc/modutils# cat graveur
alias scd0 sr_mod
alias scd1 sr_mod
alias scd2 sr_mod
alias scd3 sr_mod
pre-install sg modprobe ide-scsi
pre-install sr_mod modprobe ide-scsi
3- J'ai compilé le noyau avec:
* SCSI emulation support
* SCSI support
* SCSI CD-ROM support
* SCSI generic support
4- debian:/# dmesg
Linux version 2.4.18 (root@debian) (gcc version 2.95.4 20011002 (Debian
prerelease)) #1 SMP jeu mar 13 22:18:35 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bff3000 (ACPI NVS)
BIOS-e820: 000000000bff3000 - 000000000c000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 49136
zone(0): 4096 pages.
zone(1): 45040 pages.
zone(2): 0 pages.
No local APIC present or hardware disabled
Kernel command line:
Initializing CPU#0
Detected 598.855 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1196.03 BogoMIPS
Memory: 190700k/196544k available (1316k kernel code, 5456k reserved,
398k data, 228k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0081f9ff c0c1f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After vendor init, caps: 0081f9ff c0c1f9ff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0081f9ff c0c1f9ff 00000000 00000000
CPU: Common caps: 0081f9ff c0c1f9ff 00000000 00000000
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0081f9ff c0c1f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After vendor init, caps: 0081f9ff c0c1f9ff 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0081f9ff c0c1f9ff 00000000 00000000
CPU: Common caps: 0081f9ff c0c1f9ff 00000000 00000000
CPU0: AMD-K7(tm) Processor stepping 02
per-CPU timeslice cutoff: 1462.89 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfb480, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
AMD7409: IDE controller on PCI bus 00 dev 39
AMD7409: chipset revision 3
AMD7409: not 100% native mode: will probe irqs later
AMD7409: disabling single-word DMA support (revision < C4)
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hdb: C/H/S=0/0/0 from BIOS ignored
hda: ST313620A, ATA DISK drive
hdb: Maxtor 6E040L0, ATA DISK drive
hdc: SAMSUNG DVD-ROM SD-608, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST GCE-8160B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 26692776 sectors (13667 MB) w/512KiB Cache, CHS=26480/16/63,
UDMA(33)
hdb: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=79656/16/63,
UDMA(33)
hdc: ATAPI 32X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Partition check:
hda: [PTBL] [1661/255/63] hda1 hda2 < hda5 >
hdb: [PTBL] [4998/255/63] hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 149M
agpgart: Detected AMD Irongate chipset
agpgart: AGP aperture is 32M @ 0xe0000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 228k freed
Adding Swap: 538136k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,71), internal journal
usb-ohci.c: USB OHCI at membase 0xcc862000, IRQ 10
usb-ohci.c: usb-00:07.4, Advanced Micro Devices [AMD] AMD-756 [Viper]
USB
usb-ohci.c: AMD756 erratum 4 workaround
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,72), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,73), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb-uhci.c: $Revision: 1.275 $ time 22:26:52 Mar 13 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
Real Time Clock Driver v1.10e
usb-uhci.c: $Revision: 1.275 $ time 22:26:52 Mar 13 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
parport0: PC-style at 0x378 [PCSPP(,...)]
lp0: using parport0 (polling).
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.1
PPP BSD Compression module registered
PPP Deflate Compression module registered
VFS: Disk change detected on device ide1(22,0)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
debian:/#
Qu'ai-je oublié?
Merci à tous.
Philippe
Reply to: