On Wed, 2002-11-13 at 17:04, Michel Court wrote: > Bonjour, Bonjour, > j'imagine que cette question serait plus adequate sur Debian laptop mais > je n'y suis pas abonné :-) > J'ai toutefois cherché dans les archives sans succès. > Voici LA question. > Comment faire pour faire fonctionner XFree4 (je suis en stable) sur un > Dell Latitude C840 ? [...] Si tes drivers sont bien installés cela devrait fonctionner. J'ai une GeForce 4 avec Xfree 4.2.1 + les drivers Nvidia 1.0.2960-2. Je pense que cela fonctionne aussi en Xfree 4.1.x Vérifie que le module "NVdriver" soit chargé en saisissant la commande suivante (il faut être root) : lsmod Tu dois voir une ligne avec : NVdriver 988960 10 (autoclean) Ensuite, il y a quelques erreurs dans ton '/etc/X11/XF86Config-4'. Je corrige entre les lignes : > ### BEGIN DEBCONF SECTION > # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the > # Debian X Configuration tool, using values from the debconf database. > # > # Edit this file with caution, and see the XF86Config-4 manual page. > # (Type "man XF86Config-4" at the shell prompt.) > # > # If you want your changes to this file preserved by dexconf, only make changes > # before the "### BEGIN DEBCONF SECTION" line above, and/or after the > # "### END DEBCONF SECTION" line below. > # > # To change things within the debconf section, run the command: > # dpkg-reconfigure xserver-xfree86 > # as root. Also see "How do I add custom sections to a dexconf-generated > # XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz. > > Section "Files" > FontPath "unix/:7100" # local font server > # if the local font server has problems, we can fall back on these > FontPath "/usr/lib/X11/fonts/misc" > FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "Module" Il faut commenter (mettre un dièse) la ligne suivante c'est à dire : # Load "GLcore" > Load "GLcore" > Load "bitmap" > Load "dbe" > Load "ddc" Celle-ci aussi : # Load "dri" > Load "dri" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "pex5" > Load "record" > Load "speedo" > Load "type1" > Load "vbe" > Load "xie" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc105" > Option "XkbLayout" "fr" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/psaux" > Option "Protocol" "GlidePointPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "InputDevice" > Identifier "Generic Mouse" > Driver "mouse" > Option "SendCoreEvents" "true" > Option "Device" "/dev/input/mice" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Device" > Identifier "Dell" Ici tu dois remplacer "nv" par "nvidia" : Driver "nvidia" > Driver "nv" > Option "UseFBDev" "true" > EndSection > Corrige ton XF86Config avant de vérifier si le module est chargé. Tiens nous au courant si tu réussi :-) A+. Greg.
Attachment:
signature.asc
Description: This is a digitally signed message part