[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Pb : Debian 3.0 avec ctrl. IDE sur carte mère chipset intel E7500 !!



	Bonjour,


	J'ai des problèmes avec le noyau 2.4.18 (Débian woody) et une carte
mère bi-Xéon dont le chipset est un intel E7500. J'ai choisis les
modules suivants : 

-> ATA/IDE/MFM/RLL support, 
  -> include IDE atapi cdrom support, 
  -> SCSI emulation support, 
  -> Generic PCI IDE chipset support, 
  -> Sharing PCI IDE interrupts support, 
  -> Generic PCI BUS-Master support, 
  -> Use PCI DMA by default when available, 
  -> Intel PIIXn chipsets support, 
  -> PIIXn tunning support.

Or il ne reconnait pas le controlleur IDE (voir ci-dessous) :

------------ dmesg ------------
.............
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086,
DID=248b
PCI: Device 00:1f.1 not available because of resource collisions
PCI_IDE: chipset revision 2
PCI_IDE: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x6c60-0x6c67, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x6c68-0x6c6f, BIOS settings: hdc:pio, hdd:pio
PDC20267: IDE controller on PCI bus 04 dev 30
PDC20267: chipset revision 2
PDC20267: not 100% native mode: will probe irqs later
PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
Mode.
PDC20267: neither IDE port enabled (BIOS)
hda: IC35L120AVVA07-0, ATA DISK drive
hdb: IC35L120AVVA07-0, ATA DISK drive
hdc: NEC CD-ROM DRIVE:282, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 241254720 sectors (123522 MB) w/1863KiB Cache, CHS=239340/16/63
hdb: 241254720 sectors (123522 MB) w/1863KiB Cache, CHS=239340/16/63
hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
 hdb: [PTBL] [15017/255/63] hdb1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
..............
----------------------------


Est-ce que la config de mon noyau concernant le support controlleur IDE
est bonne ?? 


Cordialement.
-- 
Mr FARGET Vincent
Universite Claude Bernard LYON1
CNRS - UMR5020
Laboratoire des Neurosciences et Systemes Sensoriels
50, avenue Tony Garnier
69366 LYON Cedex 07



Reply to: