Problemes apres changement de carte mere
Bonjour,
Suite à une avarie, j'ai été obligé de changer ma vieille carte mère,
et comme tout
a évolué (si on peut dire...), j'ai été obligé de changer aussi de
processeur et
de carte vidéo. Heureusement les disques marchent...
Je venais juste d'intaller la nouvelle woody avec les CD officiels et
ça marchait bien.
Maintenant linux se lance sans problème, mais je n'arrive plus à
configurer XFree86.
La carte mère est une Asus P4S533, un pentium 4 à 1,7 GHz
La carte graphique une ATI RAGE 128 PRO GL/Ultra avec 32 MB
Ma première question est est-ce que ce matériel est compatible et
"facilement"
configurable avec la woody ?
Faut-il réinstaller à partir de zéro ?
Si c'est possible, pouvez vous m'aider ? (quelques détails plus bas)
Merci d'avance,
Santi.
-------
Noyau : 2.4.18-bf2.4
XFree86 Version 4.1.0.1
dans dmseg je trouve entre autre
PCI: No IRQ known for interrupt pin A of device 00:03.0. Please try
using pci=biosirq.
...
PCI: No IRQ known for interrupt pin A of device 00:0b.0. Please try
using pci=biosirq.
...
agpgart: Unsupported SiS chipset (device id: 0646), you might want to
try agp_try_unsupported=1.
agpgart: no supported devices found.
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
scanpci -v
donne entre autre
pci bus 0x1 cardnum 0x00 function 0x0000: vendor 0x1002 device 0x5446
ATI Device unknown
CardVendor 0x1002 card 0x5446 (ATI, Card unknown)
STATUS 0x02b0 COMMAND 0x0087
CLASS 0x03 0x00 0x00 REVISION 0x00
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x08
BASE0 0xf8000008 addr 0xf8000000 MEM PREFETCHABLE
BASE1 0x0000d801 addr 0x0000d800 I/O
BASE2 0xef800000 addr 0xef800000 MEM
BASEROM 0xf7fe0000 addr 0xf7fe0000 not-decode-enabled
MAX_LAT 0x00 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0b
et lorsque je lance
XFree86 -configure
on obtient
(--) PCI:*(1:0:0) ATI unknown chipset (0x5446) rev 0, Mem @
0xf8000000/26, 0xef800000/14, I/O @ 0xd800/8, BIOS @ 0xf7fe0000/17
et ça se termine par
Fatal server error:
XFree86 has found a valid card configuration.
Unfortunately the appropriate data has not been added to xf86PciInfo.h.
Please forward 'scanpci -v' output to XFree86 support team.
Reply to: