Re: debian ppc...
On Mon, 29 Apr 2002, Arthur wrote:
> hi,
> my name's Arthur , I'me French and I'me 15 years old (that's why my
> english is very bad and I'me sorry)....
Salut Arthur,
tu poste sur une liste française. donc le français y est bien lu ;-))
> I've got a PowerBook G3 500 Fire Wire and I've downloaded the debian CD1
> for PPC 2.2r6 potato.....
> it boot perfectly (the cd) and I can install the base system but when i
> want to configure yaboot it doesn't works . I've made an Apple_Bootstrap
> parition of 1 mo(/dev/hda10)( I've tried also to make an HFS partition
> of 15mo and to mount it as /boot), a swap partition of 64mo(/dev/hda11)
> and a root partition of 2go(/dev/hda12)...
La partition Apple_Bootstrap: Bien
la partition HFS pour /boot : Pas Bien.
de plus je te conseille de faire passer la partition Apple_Bootstrap au
debut des partitions. Tu peux la mettre en position 2 (juste derriere la
partition map (mon pismo fonctionne comme cela depuis longtemps)
ou à défaut en première position derriere les partitions (driver etc)
soit à vue de nez position 9.
pour ce faire utilise la commande 'r' de mac-fdisk.
> I've typed this into the shell at the end of the Base
System
> installation when it asks if i want to make linux bootable from the hard
> drive (I did'nt say yes as it's written in the doc):
bien vu.
<mode pompeux ON>
C'est agréable de voir qu'il y à des gens qui lisent les doc
<mode pompeux OFF>
> mkofboot --boot /dev/hda10 -m /target/etc/ofboot.b --root /dev/hda12
> --partition 12
Bien
>
> /target/etc/ofboot.b doesn't exist so I've made it...
Bien
> and after that it asks me if I want to create an HFS file system on
> /dev/hda10 so i said yes....
Bien
> after that i reboot my machine and .....nothing...at the boot it search
> something to boot and after 2 seconds my machine boot MacOSX...
vu que tu as fait ton installation, il n'est pas nécessaire de tout
reprendre pour le momment ;-))
boote sur le CD, et au prompt de yaboot
Welcome to yaboot....
Boot:
tappe hd:<linux_root_partition>,/vmlinux
dans ton cas <linux_root_partition> semble être 12.
normalement tu vas booter sous Debian.
à ce momment il va falloir que tu lise les pages man yaboot et man (5)
yaboot.conf
pour voir comment configurer le fichier /etc/yaboot.conf
ça ressemble à quelque chose comme cela, voici un extrait du mien.
<<
## Change to your bootstrap partition ie: /dev/hda2
boot=/dev/hda2 <- le num de la partition Apple_Bootstrap (tu vois en
position2 ça fonctionne très bien)
device=hd:
partition=10 <- la partition / toi ce sera apparement 12
delay=10
timeout=20
install=/usr/lib/yaboot/yaboot
magicboot=/usr/lib/yaboot/ofboot
defaultos=linux <- bien sur linux sera ton OS par défaut ;-)))
enablecdboot <- si tu veux booter sur CD
enableofboot <- si tu veux booter sous Open Firmware
root=/dev/hda10
# le label a booter par defaut
default=debian
image=/vmlinux
label=debian
append="video=ati128fb"
read-only
# sur quelle partition se trouve MacOS
macos=hd:15
# sur quelle partition se trouve MacOS X
macosx=hd:18
<<
ensuite tu lis les pages man (8) ybin, puis un petit coup de ybin, pour
mettre à jour le fichier de conf de yaboot sur la partition
Apple_Bootstrap.
ensuite au prochain boot, si "tout il est OK", tu auras le choix de
booter sous MacOS X (en appuyant sur la touche x), ou linux (en appuyant
sur la touche l). Attention à ce momment le clavier est en qwerty...
Bon courage
Eric
--
Le neuneu est à Usenet ce que le staphylocoque doré est au furoncle.
Ils bénéficient tous les deux d'un système cognitif de niveau
équivalent, malgré un léger avantage intellectuel au staphylocoque.
-+- JdC in <http://www.le-gnu.net> : No Fu(tur)oncle -+-
--
To UNSUBSCRIBE, email to debian-user-french-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: