Re: kan debian geen minix partities lezen
On Mon, May 30, 2011 at 06:21:34PM +0000, Roelof Wobben wrote:
>
> > losetup --find --show --offset $[103329793*512] /dev/sdb4
> > mount -t minix -o ro /dev/loop1 /mnt
>
> [ 265.445050] VFS: Can't find a Minix filesystem V1 | V2 | V3 on device loop0.
> [ 282.869731] bio too big device loop1 (2 > 0)
> [ 282.869737] MINIX-fs: unable to read superblock
Aan deze kant heb ik wat nagebouwd, op host "inertia", de hele disk is /dev/sdc:
|inertia:~
|# fdisk -lu /dev/sdc4
|
|Error: Can't have a partition outside the disk!
|inertia:~
|# fdisk -lu /dev/sdc
|
|Disk /dev/sdc: 8 GB, 8068999680 bytes
|255 heads, 63 sectors/track, 981 cylinders, total 15759765 sectors
|Units = sectors of 1 * 512 = 512 bytes
|
| Device Boot Start End Blocks Id System
|/dev/sdc1 63 321299 160618 83 Linux
|/dev/sdc2 321300 642599 152617 83 Linux
|/dev/sdc3 642600 963899 152617 83 Linux
|/dev/sdc4 963900 15759764 7389900 f Extended LBA
|/dev/sdc5 963963 5783399 2401717 81 Minix >1.4b
|Warning: Partition 5 does not end on cylinder boundary.
|/dev/sdc6 5783401 10763549 2482042 81 Minix >1.4b
|Warning: Partition 6 does not end on cylinder boundary.
|/dev/sdc7 10763551 15759764 2490075 81 Minix >1.4b
|Warning: Partition 7 does not end on cylinder boundary.
|inertia:~
|inertia:~
|# losetup --find --show --offset $[963963*512] /dev/sdc
|/dev/loop0
|inertia:~
|# mount -t minix -o ro /dev/loop0 /mnt
|inertia:~
|# mount | grep /mnt
|/dev/loop0 on /mnt type minix (ro)
|inertia:~
|# ls -l /mnt | head -n 3
|totaal 872
|drwxr-xr-x 3 root root 128 mrt 30 19:09 acpi
|-rw-r--r-- 1 root root 2975 apr 27 2008 adduser.conf
|inertia:~
|# echo Hoera
|Hoera
|inertia:~
|# umount /mnt
|inertia:~
|# losetup --detach /dev/loop0
|inertia:~
|#
Het ziet er naar uit dat we uit de hele disk moeten lezen.
(merk op dat '/dev/sdb4' verandert is in '/dev/sdb' )
losetup --find --show --offset $[103329793*512] /dev/sdb
Ik lees het morgenvroeg wel
Cheers,
Stappers
--
> And is there a policy on top-posting vs. bottom-posting?
Yes.
Reply to: