Re: [Debian]: WD22500L: Ueberlappende Partitionen
Paul Seelig wrote:
>
> Hallo Welt!
>
> Ich habe eine 2,5GB Western Digital EIDE-Festplatte (WD22500L) unter
> Debian (hamm) frisch partitioniert. Wenn ich aber nun mit 'fdisk' die
> Partitionstabelle verifiziere, dann erzaehlt der mir etwas von
> ueberlappende Partitionen und ich weiss nicht, wie ich dem abhelfen
> kann. Es ist so ziemlich egal, ob ich nun mit 'cfdisk' oder 'fdisk'
> partitioniere, die Partitionen ueberlappen sich laut dem "verify" von
> 'fdisk' in jedem Fall:
>
> --------------------snip-------------------------
> [root]/root > fdisk
> Using /dev/hda as default device!
> The number of cylinders for this disk is set to 4960.
> This is larger than 1024, and may cause problems with:
> 1) software that runs at boot time (e.g., LILO)
> 2) booting and partitioning software form other OSs
> (e.g., DOS FDISK, OS/2 FDISK)
>
> Command (m for help): p
>
> Disk /dev/hda: 16 heads, 63 sectors, 4960 cylinders
> Units = cylinders of 1008 * 512 bytes
>
> Device Boot Begin Start End Blocks Id System
> /dev/hda1 * 1 1 102 51376+ 83 Linux native
> /dev/hda2 103 103 712 307440 6 DOS 16-bit >=32M
> /dev/hda3 713 713 3714 1513008 5 Extended
> /dev/hda5 713 713 814 51376+ 83 Linux native
> /dev/hda6 815 815 916 51376+ 83 Linux native
> /dev/hda7 917 917 1174 130000+ 82 Linux swap
> /dev/hda8 1024 1175 1479 153688+ 83 Linux native
> /dev/hda9 1024 1480 2190 358312+ 83 Linux native
> /dev/hda10 2048 2191 2698 256000+ 83 Linux native
> /dev/hda11 2048 2699 3308 307408+ 83 Linux native
> /dev/hda12 3072 3309 3714 204592+ 83 Linux native
>
> Command (m for help): v
> Warning: partition 7 overlaps partition 8.
> Warning: partition 7 overlaps partition 9.
> Warning: partition 8 overlaps partition 9.
> Warning: partition 9 overlaps partition 10.
> Warning: partition 9 overlaps partition 11.
> Warning: partition 10 overlaps partition 11.
> Warning: partition 11 overlaps partition 12.
> 1550542 unallocated sectors
> --------------------snip-------------------------
>
> Muss ich mir wegen dieser Meldungen Sorgen machen, oder kann ich sie
> beruhigt ignorieren? Wie bekomme ich es hin, dass sich die
> Partitionen nicht ueberlappen?
>
> Ich habe trotzdem einfach mal installiert und das System laeuft seit
> zwei Tagen recht stabil. Aber sonderlich wohl fuehle ich mich damit
> in Anbetracht der 'fdisk'-Warnungen eigentlich nicht...
>
> Ciao, P. *8^)
> --
Hallo Paul!
Interessanterweise klinkt sich ab Zylinder 1024 die "Begin"-Spalte von
der "Start"-Spalte ab und zeigt nur noch Vielfache von 1024 an.
fdisk merkt natuerlich dies und schreit Zeter und Mordio.
Ich kann es dank meiner winzigen Platten 1057cyl, nur bis 1024 belegt,
nicht nachvollziehen, aber vielleicht sehen mal Leute mit dickeren
Platten mit (c?)fdisk <drive> nach. Mit "p" anzeigen, mit "q" raus, dann
passiert nix.
mit freundlichen Grueszen
--
Norbert Gruen (umlaut u, ü)
Do Bill Gate$ a favour, support alternatives to Micro$oft!!!
"reply-to"-> Text, "from"->MIME
------------------------------------------------
Um sich aus der Liste auszutragen schicken Sie
bitte eine E-Mail an majordomo@jfl.de die im Body
"unsubscribe debian-user-de <your_email_address>"
enthaelt.
Bei Problemen bitte eine Mail an: Jan.Otto@jfl.de
------------------------------------------------
Anzahl der eingetragenen Mitglieder: 400
Reply to: