[Debian]: ISDN-Zugang bei IBM.NET
Hallo,
ich habe schon einiges an Configuration versucht, bekomme aber leider nur die Meldungen:
Dec 12 08:41:20 Ridcully kernel: isdn: Verbose-Level is 2000
Dec 12 08:41:21 Ridcully ipppd: info: no CHAP secret entry for this user!
Dec 12 08:48:07 Ridcully kernel: OPEN: 10.0.0.1 -> 152.158.1.86 ICMP
Dec 12 08:48:07 Ridcully kernel: ippp0: dialing 0 07219896000...
Dec 12 08:48:09 Ridcully kernel: isdn_net: ippp0 connected
Dec 12 08:48:19 Ridcully kernel: isdn_net: local hangup ippp0
Dec 12 08:48:19 Ridcully kernel: ippp0: Chargesum is 0
Kann mir einer helfen mein ipppd-Config-File zu korrigieren?
Danke im Voraus,
Karsten
# Options file for ipppd.
# ipppd will not read /etc/ppp/options or /etc/ppp/ioptions or any
other
# config file. Everything has to be in here.
# REMOVE the next line once configuration is complete
#########################
# REMOVE the above line once configuration is complete
########################
# "peer" is the name for our syncppp partner.
# STANDARD OPTIONS
#debug # enable debugging
#kdebug X # set kernel debugging level to X
#nodetach # (no) fork to the background
#callback X # ask for callback (parameter X ?)
#lock # create a lock file for device
#domain X # add domain X to a given hostname
#pidfile X # save pid in file X
#call X # take options from privileges file (???)
#idle X # idle time limit (seconds)
#holdoff X # holdoff time limit (seconds)
#maxconnect X # set maximum connection time (in seconds ?)
#+mp # enable multi line ppp
#+pwlog # log password (WARNING: possible security hole)
#nomagic # magic number negotiation
ppp handshake : tuning
#silent # don't even try to initiate the connection
#passive # wait for the peer to initiate the connection
#lcp-echo-failure X # consecutive echo failures
#lcp-echo-interval X # time for lcp echo events
lcp-restart 1 # Set timeout for LCP
#lcp-max-terminate X # Set max #xmits for term-reqs
#lcp-max-configure X # Set max #xmits for conf-reqs
#lcp-max-failure X # Set max #conf-naks for LCP
# AUTHENTICATION
name karsten # set local name for auth
user Internet.deinet.kajaege # set name for auth with peer
#usehostname # use hostname for auth
remotename Internet.deinet.kajaege # set remote name for auth
#noauth # (dont) require peer (the other) to auth
require-pap # allow only pap authetication
#require-chap # allow only chap authentication
#login # use system password database for pap
#papcrypt # pap passwords are encrypted
# AUTHENTICATION TUNING
#pap-restart X # Set retransmit timeout for PAP
#pap-max-authreq X # Set max #xmits for auth-reqs
#pap-timeout X # Set time limit for peer PAP auth.
#chap-restart X # Set timeout for CHAP
#chap-max-challenge X # Set max #xmits for challenge
#chap-interval X # Set interval for rechallenge
# COMPRESSION
#noaccomp # address compression on/off
#nopcomp # protocol field compression on/off
#novj # van jacobsen compression on/off
#novjccomp # van jacobsen connection-ID compression on/off
#vj-max-slots X # tune maximum vj header slots
#nobsdcomp # bsd compression on/off
#nodeflate # deflate compression on/off
#nopredictor1 # predictor1 compression in/off
#noccp # compression negotation on/off
# IP NETWORKING
#noip # en/disable ip transfer
#X:Y # set local ip to X, remote ip to Y
#noipdefault # don't use name for default ip addr
useifip # use ip addresses form interface
#usefirstip # use first ip from auth file for remote
#netmask X # set netmask X
defaultroute # (dont) set default route
#hostroute # (dont) set host route
#noproxyarp # (dont) set an proxy arp entry
#mru X # set maximum size of recive units to X
#default-mru # disable mru negotation
mtu 1500 # set maximum size of transmit units to X (1500 is OK)
#useifmtu # use mtu from interface
#ipparam X # set ip parameters in script X
#ms-dns X # dns address for the peers use
#ms-wins X # wins address for the peers use
#set_userip # define valid ip addresses in /etc/ppp/useriptab
#ipcp-restart X # Set timeout for IPCP
#ipcp-max-terminate X # Set max #xmits for term-reqs
#ipcp-max-configure X # Set max #xmits for conf-reqs
#ipcp-max-failure X # Set max #conf-naks for IPCP
ipcp-accept-local # Accept peer's address for us
ipcp-accept-remote # Accept peer's address for it
# IPX NETWORKING
noipx # en/disable ipx
#ipx-network X # IPX network number
#ipxcp-accept-network # Accept peer netowrk
#ipx-node X # IPX node number
#ipxcp-accept-local # Accept our address
#ipxcp-accept-remote # Accept peer's address
#ipx-routing X # IPX routing proto number
#ipx-router-name X # IPX router name
#ipxcp-restart X # Set timeout for IPXCP
#ipxcp-max-terminate X # max #xmits for term-reqs
#ipxcp-max-configure X # max #xmits for conf-reqs
#ipxcp-max-failure X # max #conf-naks for IPXCP
--
|
\ / _\/_
.-'-. //o\ _\/_
_ ___ __ _ --_ / \ _--_ __ __ | __ /o\\
=-=-_=-=-_=-=_=-_= -=======- = =-=_=-=_,-'|"'_"'"--|-,_
=- _=-=-_=- _=-= _--=====- _=-=_-_,-" (") |
jgs=- =- =-= =- = - -===- -= - ." '-( : )-'
... anything is possible...
Karsten Jaeger Tel.: +49 72 19 37 53 23
Morgenstrasse 53
D-76137 Karlsruhe
eMail: karsten.jaeger@ibm.net
jaka0011@fh-karlsruhe.de
------------------------------------------------
Um sich aus der Liste auszutragen schicken Sie
bitte eine E-Mail an majordomo@jfl.de die im Body
"unsubscribe debian-user-de <deine emailadresse>"
enthaelt.
Bei Problemen bitte eine Mail an: Jan.Otto@jfl.de
------------------------------------------------
Anzahl der eingetragenen Mitglieder: 618
Reply to: