Bug#216218: installation-reports: report 20 oct 2003
INSTALL REPORT
Debian-installer-version:
<http://gluck.debian.org/cdimage/testing/netinst/i386/
sarge-i386-netinst.iso 08-Oct-2003 16:16 115M >
uname -a: <Linux localhost 2.4.22-1-386 #1 Fri Sep 5 20:56:48 EST 2003
i686 GNU/Linux>
Date: <20 oct 2003 19:32>
Method: I use sarge-netinstall I try first with orinoco_cs pcmcia
wireless card and then with the interla intel e100
Machine: <HP omnibook xe3 gf>
Processor:Intel Pentium3 866
Memory:370M
Root Device: <IDE HITACHI_DK23CA-20>
Root Size/partition table:
major minor #blocks name rio rmerge rsect ruse wio wmerge wsect
wuse running use aveq
3 0 19535040 ide/host0/bus0/target0/lun0/disc 5795 6730 96810
31640 6887 47408 434858 712470 -1 1499990 42155542
the entire disk
3 1 80293 ide/host0/bus0/target0/lun0/part1 23 525 1096
820 8 1 18 90 0 720 910
/boot ext3
3 2 489982 ide/host0/bus0/target0/lun0/part2 2 0 16 20
0 0 0 0 0 20 20
swap
3 3 4883760 ide/host0/bus0/target0/lun0/part3 5766
6193 95666 30420 6879 47407 434840 712380 0 72410 742800
/ ext3
3 4 14080972 ide/host0/bus0/target0/lun0/part4 1 3
8 240 0 0 0 0 0 240 240
I'd like to put my existing home here, but it is in xfs
and it has not been recognize.
Output of lspci:
00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host
Bridge (rev 03)
00:02.0 VGA compatible controller: Intel Corp. 82830 CGC [Chipset
Graphics Controller] (rev 03)
00:02.1 Display controller: Intel Corp. 82830 CGC [Chipset Graphics
Controller]
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub#1) (rev 01)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub#2) (rev 01)
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub#3) (rev 01)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge(rev 41)
00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 01)
00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev01)
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 01)
02:02.0 Communication controller: ESS Technology ES2838/2839 SuperLink
Modem (rev 01)
02:03.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1
(rev 12)
02:04.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev
01)
02:04.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev
01)
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE
(LOM) Ethernet Controller (rev 41)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [E]
Config network: [O]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [E]
Mount partitions: [E]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] =
didn't try it
Comments/Problems:
Configure network hardware:
I start pcmcia but the wireless card was not recognized and the module
was not on the list. I write orinoco_cs and all works.
I try also with internal card. When i choosed e100 from the list it
returns me an error something line modprobe /dev/null (soory i don't
remember with precision) and it is impossible to start network.
I have had to open a shell and modprobe e100 manually.
Reiserfs hang, i have to kill it!
It's impossible to modprobe xfs and no error was show
So until reboot i think that my existing home was mounting.
After reboot pcmcia stop working and it seems that
orinoco_cs, yenta_socket, pcmcia_core, ds and orinoco
modules doesn't exist.
Interla card works well, and i can istall from LAN.
I also try daily image:
sarge-i386-businesscard.iso 19-Oct-2003 16:16 51.5M
sarge-i386-netinst.iso 19-Oct-2003 16:16
but it hangs during load the modules.
I hope this help, sorry for my englis :)
Thanks for all your work!
Bye
Reply to: