sarge-install fails on DELL Dimension 8300
Debian-installer-version: http://gluck.debian.org/cdimage/testing/netinst/
i386/daily/ file dating from 23-oct-2003
uname -a:
Date: 26.10.2003 00:10
Method: boot from cdrom
Machine: Dell Dimension 8300
Processor: Intel Pentium 4 2,6GHz HT
Memory: 1024 MB
Root Device: Seagate SATA-Disc on Intel ICH5
Output of lspci:
00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.3 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev
02)
00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev
02)
00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio
Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon
9800]
01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800]
(Secondary)
02:08.0 Ethernet controller: Intel Corp.: Unknown device 1050 (rev 02)
Base System Installation Checklist:
Initial boot worked: [E]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
System hangs while probing for IDE-Adapters
last line is:
insmod generic 2>/dev/null
Reply to: