Re: Latest netinst iso
On 08/06/2018 07:55 AM, John Paul Adrian Glaubitz wrote:
On 08/06/2018 05:01 PM, Fred wrote:
I am the original poster for this thread. I tried installing the NETINST.iso and also had a problem. The U10 has an HP DVD drive in it. The install CD seemed to load ok and the installer started. When it got to the detecting hardware function it decided that no cdrom drive was installed and would not proceed. I am going to install the original Sun cdrom drive and try again when I have time.
I need the exact error message and I need the output of "dmesg" and "lspci"
on this particular machine. It might just be that we are not enabling the
driver for your PATA/SATA controller.
Adrian
Hi,
Here are the results you asked for except the exact error message the
installer gave. It said no cdrom could be found.
lspci output:
00:01.0 PCI bridge: Oracle/SUN Simba Advanced PCI Bridge (rev 13)
00:01.1 PCI bridge: Oracle/SUN Simba Advanced PCI Bridge (rev 13)
01:01.0 Bridge: Oracle/SUN EBUS (rev 01)
01:01.1 Ethernet controller: Oracle/SUN Happy Meal 10/100 Ethernet [hme]
(rev 01)
01:02.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] 3D Rage Pro PCI (rev 5c)
01:03.0 IDE interface: Silicon Image, Inc. PCI0646 (rev 03)
02:01.0 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1
Controller (rev 61)[ 0.000211]
dmseg output:
PROMLIB: Sun IEEE Boot Prom 'OBP 3.19.4 1999/04/28 15:05'
[ 0.000286] PROMLIB: Root node compatible:
[ 0.000675] Linux version 4.16.0-1-sparc64
(debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-17))
#1 Debian 4.16.5-1 (2018-04-29)
[ 0.041236] bootconsole [btext0] enabled
[ 0.041266] ARCH: SUN4U
[ 0.041469] Ethernet address: 08:00:20:c0:dd:af
[ 0.041524] MM: PAGE_OFFSET is 0xfffff80000000000 (max_phys_bits == 40)
[ 0.041533] MM: VMALLOC [0x0000000100000000 --> 0x0000060000000000]
[ 0.041542] MM: VMEMMAP [0x0000060000000000 --> 0x00000c0000000000]
[ 0.045435] Kernel: Using 3 locked TLB entries for main kernel image.
[ 0.045522] Remapping the kernel...
[ 0.085684] done.
[ 0.375583] OF stdout device is: /pci@1f,0/pci@1,1/SUNW,m64B@2
[ 0.375603] PROM: Built device tree with 72391 bytes of memory.
[ 0.375943] Top of RAM: 0x1ff26000, Total RAM: 0x1ff1a000
[ 0.375950] Memory hole size: 0MB
[ 1.006960] Allocated 16384 bytes for kernel page tables.
[ 1.007437] Zone ranges:
[ 1.007450] Normal [mem 0x0000000000000000-0x000000001ff25fff]
[ 1.007467] Movable zone start for each node
[ 1.007473] Early memory node ranges
[ 1.007483] node 0: [mem 0x0000000000000000-0x000000001fefdfff]
[ 1.007492] node 0: [mem 0x000000001ff00000-0x000000001ff13fff]
[ 1.007500] node 0: [mem 0x000000001ff1e000-0x000000001ff25fff]
[ 1.007518] Initmem setup node 0 [mem
0x0000000000000000-0x000000001ff25fff]
[ 1.007534] On node 0 totalpages: 65421
[ 1.007547] Normal zone: 576 pages used for memmap
[ 1.007554] Normal zone: 0 pages reserved
[ 1.007566] Normal zone: 65421 pages, LIFO batch:15
[ 1.040458] Booting Linux...
[ 1.040484] CPU CAPS: [flush,stbar,swap,muldiv,v9,mul32,div32,v8plus]
[ 1.040550] CPU CAPS: [vis]
[ 1.049063] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 1.049093] pcpu-alloc: [0] 0
[ 1.053248] Built 1 zonelists, mobility grouping on. Total pages: 64845
[ 1.053266] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.0-1-sparc64
root=UUID=22280ee3-cc78-4ae8-96fa-6d9250e05d8c ro quiet
[ 1.066389] Dentry cache hash table entries: 65536 (order: 6, 524288
bytes)
[ 1.069018] Inode-cache hash table entries: 32768 (order: 5, 262144
bytes)
[ 1.069042] Sorting __ex_table...
[ 1.117074] Memory: 478040K/523368K available (6176K kernel code,
768K rwdata, 1712K rodata, 472K init, 390K bss, 45328K reserved, 0K
cma-reserved)
[ 1.117158] random: get_random_u64 called from
__kmem_cache_create+0x24/0x4a0 with crng_init=0
[ 1.119128] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 1.119743] ftrace: allocating 21417 entries in 42 pages
[ 1.236315] NR_IRQS: 2048, nr_irqs: 2048, preallocated irqs: 1
[ 1.236707] clocksource: tick: mask: 0xffffffffffffffff max_cycles:
0x5306eb473f, max_idle_ns: 440795213232 ns
[ 1.236722] clocksource: mult[2c71c72] shift[24]
[ 1.236734] clockevent: mult[5c28f5c3] shift[32]
[ 1.237034] Console: colour dummy device 80x25
[ 1.237053] console [tty0] enabled
[ 1.237062] bootconsole [btext0] disabled
[ 1.316937] Calibrating delay using timer specific routine.. 722.33
BogoMIPS (lpj=1444665)
[ 1.316965] pid_max: default: 32768 minimum: 301
[ 1.318095] Security Framework initialized
[ 1.318118] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 1.318293] AppArmor: AppArmor initialized
[ 1.318864] Mount-cache hash table entries: 1024 (order: 0, 8192 bytes)
[ 1.318909] Mountpoint-cache hash table entries: 1024 (order: 0, 8192
bytes)
[ 1.327107] devtmpfs: initialized
[ 1.334540] Performance events: No support for PMU type 'ultra12'
[ 1.336059] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 1.336094] futex hash table entries: 256 (order: -1, 6144 bytes)
[ 1.338302] NET: Registered protocol family 16
[ 1.354059] audit: initializing netlink subsys (disabled)
[ 1.360878] /pci@1f,0: PCI IO[1fe02000000] MEM[1ff00000000]
[ 1.360902] MEM64[1ff00000000]
[ 1.361011] audit: type=2000 audit(0.116:1): state=initialized
audit_enabled=0 res=1
[ 1.361089] /pci@1f,0: SABRE PCI Bus Module ver[0:0]
[ 1.361097] PCI: Scanning PBM /pci@1f,0
[ 1.361864] sabre f005fa24: PCI host bridge to bus 0000:00
[ 1.361899] pci_bus 0000:00: root bus resource [io
0x1fe02000000-0x1fe02ffffff] (bus address [0x0000-0xffffff])
[ 1.361924] pci_bus 0000:00: root bus resource [mem
0x1ff00000000-0x1ffffffffff] (bus address [0x00000000-0xffffffff])
[ 1.361947] pci_bus 0000:00: root bus resource [mem
0x1ff00000000-0x1ffffffffff] (bus address [0x00000000-0xffffffff])
[ 1.361969] pci_bus 0000:00: root bus resource [bus 00-02]
[ 1.366428] pci 0000:02:01.0: supports D1 D2
[ 1.366451] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
[ 1.367159] pci 0000:02:01.1: supports D1 D2
[ 1.367176] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot
[ 1.367904] pci 0000:02:01.2: supports D1 D2
[ 1.367922] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot
[ 1.368551] pci 0000:00:01.0: can't claim BAR 14 [mem
0x1ff00000000-0x1ffbfffffff]: address conflict with Video RAM area [???
0x1ff000a0000-0x1ff000bffff flags 0x80000000]
[ 1.368605] pci 0000:02:01.2: can't claim BAR 0 [mem
0x1ff00002000-0x1ff000020ff]: no compatible bridge window
[ 1.379924] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 1.379940] HugeTLB registered 8.00 MiB page size, pre-allocated 0 pages
[ 1.379950] HugeTLB registered 256 MiB page size, pre-allocated 0 pages
[ 1.379961] HugeTLB registered 2.00 GiB page size, pre-allocated 0 pages
[ 1.384106] pci 0000:01:02.0: vgaarb: VGA device added:
decodes=io+mem,owns=none,locks=none
[ 1.384137] pci 0000:01:02.0: vgaarb: bridge control possible
[ 1.384151] pci 0000:01:02.0: vgaarb: setting as boot device (VGA
legacy resources not available)
[ 1.384159] vgaarb: loaded
[ 1.384563] pps_core: LinuxPPS API ver. 1 registered
[ 1.384572] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 1.384629] PTP clock support registered
[ 1.388093] /pci@1f,0/pci@1,1/ebus@1/eeprom@14,0: Mostek regs at
0x1fff1000000
[ 1.389161] AUXIO: Found device at
/pci@1f,0/pci@1,1/ebus@1/auxio@14,726000
[ 1.389791] clocksource: Switched to clocksource tick
[ 1.538760] VFS: Disk quotas dquot_6.6.0
[ 1.538987] VFS: Dquot-cache hash table entries: 1024 (order 0, 8192
bytes)
[ 1.541114] AppArmor: AppArmor Filesystem Enabled
[ 1.570532] NET: Registered protocol family 2
[ 1.572452] tcp_listen_portaddr_hash hash table entries: 512 (order:
0, 8192 bytes)
[ 1.572549] TCP established hash table entries: 4096 (order: 2, 32768
bytes)
[ 1.572766] TCP bind hash table entries: 4096 (order: 2, 32768 bytes)
[ 1.572974] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.573463] UDP hash table entries: 256 (order: 0, 8192 bytes)
[ 1.573529] UDP-Lite hash table entries: 256 (order: 0, 8192 bytes)
[ 1.574466] NET: Registered protocol family 1
[ 1.574723] PCI: Enabling device: (0000:02:01.0), cmd 1
[ 1.574787] PCI: Enabling device: (0000:02:01.1), cmd 1
[ 1.574839] PCI: Enabling device: (0000:02:01.2), cmd 2
[ 1.574876] pci 0000:02:01.2: can't ioremap BAR 0: [mem size 0x00000100]
[ 1.574890] PCI: CLS 64 bytes, default 64
[ 1.575424] Unpacking initramfs...
[ 4.974680] Freeing initrd memory: 18056K
[ 4.975220] power: Control reg at 1fff1724000
[ 4.979544] Initialise system trusted keyrings
[ 4.980071] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[ 5.004092] zbud: loaded
[ 17.370323] Key type asymmetric registered
[ 17.370342] Asymmetric key parser 'x509' registered
[ 17.371068] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 250)
[ 17.371741] io scheduler noop registered
[ 17.371757] io scheduler deadline registered
[ 17.372705] io scheduler cfq registered (default)
[ 17.372721] io scheduler mq-deadline registered
[ 17.374901] atyfb: 3D RAGE PRO (Mach64 GP, PQFP, PCI) [0x4750 rev 0x7c]
[ 17.374984] atyfb: 4M SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL,
100 Mhz MCLK, 100 MHz XCLK
[ 17.375801] fbcon: ATY Mach64 (fb0) is primary device
[ 17.450371] Console: switching to colour frame buffer device 160x64
[ 17.478500] atyfb: fb0: ATY Mach64 frame buffer device on PCI
[ 17.481118] /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8: Keyboard port at
1fff13083f8, irq 6
[ 17.481922] /pci@1f,0/pci@1,1/ebus@1/su@14,3062f8: Mouse port at
1fff13062f8, irq 7
[ 17.483073] f0061cc8: ttyS0 at MMIO 0x1fff1400000 (irq = 5, base_baud
= 115200) is a SAB82532 V3.2
[ 17.483822] f0061cc8: ttyS1 at MMIO 0x1fff1400040 (irq = 5, base_baud
= 115200) is a SAB82532 V3.2
[ 17.486797] mousedev: PS/2 mouse device common for all mice
[ 17.492493] rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0
[ 17.493006] ledtrig-cpu: registered to indicate activity on CPUs
[ 17.495812] NET: Registered protocol family 10
[ 17.580769] Segment Routing with IPv6
[ 17.580979] mip6: Mobile IPv6
[ 17.581002] NET: Registered protocol family 17
[ 17.581049] mpls_gso: MPLS GSO support
[ 17.583337] registered taskstats version 1
[ 17.583348] Loading compiled-in X.509 certificates
[ 18.138442] input: Sun Type 5 keyboard as
/devices/root/f005fa24/f0060218/f0061568/f00635f8/serio0/input/input0
[ 18.140359] input: Sun Mouse as
/devices/root/f005fa24/f0060218/f0061568/f0064e58/serio1/input/input1
[ 19.110836] Loaded X.509 cert 'secure-boot-test-key-lfaraone:
97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[ 19.119738] Loaded X.509 cert 'Debian Project: Ben Hutchings:
008a018dca80932630'
[ 19.119982] zswap: loaded using pool lzo/zbud
[ 19.120343] AppArmor: AppArmor sha1 policy hashing enabled
[ 19.121093] rtc-m48t59 rtc-m48t59.0: setting system clock to
2018-08-07 16:09:05 UTC (1533658145)
[ 19.129983] This architecture does not have kernel memory protection.
[ 20.666401] sunhme.c:v3.10 August 26, 2008 David S. Miller
(davem@davemloft.net)
[ 20.688317] eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet
[ 20.688340] 08:00:20:c0:dd:af
[ 20.726356] usbcore: registered new interface driver usbfs
[ 20.726539] usbcore: registered new interface driver hub
[ 20.735874] usbcore: registered new device driver usb
[ 20.753868] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 20.758849] uhci_hcd: USB Universal Host Controller Interface driver
[ 20.782694] uhci_hcd 0000:02:01.0: UHCI Host Controller
[ 20.782876] uhci_hcd 0000:02:01.0: new USB bus registered, assigned
bus number 1
[ 20.782930] uhci_hcd 0000:02:01.0: detected 2 ports
[ 20.783032] uhci_hcd 0000:02:01.0: irq 15, io base 0x1fe02000400
[ 20.788642] ehci-pci: EHCI PCI platform driver
[ 20.794191] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.794213] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 20.794225] usb usb1: Product: UHCI Host Controller
[ 20.794238] usb usb1: Manufacturer: Linux 4.16.0-1-sparc64 uhci_hcd
[ 20.794250] usb usb1: SerialNumber: 0000:02:01.0
[ 20.796188] hub 1-0:1.0: USB hub found
[ 20.798875] hub 1-0:1.0: 2 ports detected
[ 20.805039] ehci-pci 0000:02:01.2: EHCI Host Controller
[ 20.805122] ehci-pci 0000:02:01.2: new USB bus registered, assigned
bus number 2
[ 20.805522] ehci-pci 0000:02:01.2: irq 17, io mem 0x1ff00002000
[ 20.808352] SCSI subsystem initialized
[ 20.818895] ehci-pci 0000:02:01.2: USB 2.0 started, EHCI 1.00
[ 20.819779] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 20.819796] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 20.819809] usb usb2: Product: EHCI Host Controller
[ 20.819821] usb usb2: Manufacturer: Linux 4.16.0-1-sparc64 ehci_hcd
[ 20.819833] usb usb2: SerialNumber: 0000:02:01.2
[ 20.821646] hub 2-0:1.0: USB hub found
[ 20.824815] hub 2-0:1.0: 4 ports detected
[ 20.867610] hub 1-0:1.0: USB hub found
[ 20.867743] hub 1-0:1.0: 2 ports detected
[ 20.869288] uhci_hcd 0000:02:01.1: UHCI Host Controller
[ 20.869359] uhci_hcd 0000:02:01.1: new USB bus registered, assigned
bus number 3
[ 20.869408] uhci_hcd 0000:02:01.1: detected 2 ports
[ 20.869507] uhci_hcd 0000:02:01.1: irq 16, io base 0x1fe02000420
[ 20.870626] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.870644] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 20.870656] usb usb3: Product: UHCI Host Controller
[ 20.870669] usb usb3: Manufacturer: Linux 4.16.0-1-sparc64 uhci_hcd
[ 20.870681] usb usb3: SerialNumber: 0000:02:01.1
[ 20.873741] hub 3-0:1.0: USB hub found
[ 20.878928] hub 3-0:1.0: 2 ports detected
[ 20.948702] libata version 3.00 loaded.
[ 20.979402] scsi host0: pata_cmd64x
[ 20.989481] scsi host1: pata_cmd64x
[ 20.990257] ata1: PATA max MWDMA2 cmd 0x1fe02c00000 ctl 0x1fe02c00008
bmdma 0x1fe02c00020 irq 14
[ 20.990276] ata2: PATA max MWDMA2 cmd 0x1fe02c00010 ctl 0x1fe02c00018
bmdma 0x1fe02c00028 irq 14
[ 20.990869] pata_cmd64x: active 10 recovery 10 setup 3.
[ 20.990901] pata_cmd64x: active 10 recovery 10 setup 3.
[ 21.154506] ata1.00: ATA-4: WDC WD153AA-00BAA0, 10.09K11, max UDMA/66
[ 21.154529] ata1.00: 30064608 sectors, multi 0: LBA
[ 21.154603] pata_cmd64x: active 3 recovery 1 setup 1.
[ 21.154642] pata_cmd64x: active 3 recovery 1 setup 1.
[ 21.160674] ata1.00: configured for MWDMA2
[ 21.162046] scsi 0:0:0:0: Direct-Access ATA WDC WD153AA-00BA
9K11 PQ: 0 ANSI: 5
[ 21.166370] pata_cmd64x: active 10 recovery 10 setup 3.
[ 21.166398] pata_cmd64x: active 10 recovery 10 setup 3.
[ 21.302382] hme 0000:01:01.1 enp1s1f1: renamed from eth0
[ 21.343237] ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-H20N, C805, max UDMA/44
[ 21.343300] pata_cmd64x: active 3 recovery 1 setup 1.
[ 21.343329] pata_cmd64x: active 3 recovery 1 setup 1.
[ 21.367287] ata2.00: configured for MWDMA2
[ 42.175653] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 42.176013] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0
dma 96 in
Inquiry 12 00 00 00 60 00res
40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 42.176613] ata2.00: status: { DRDY }
[ 42.176814] pata_cmd64x: active 10 recovery 10 setup 3.
[ 42.176840] pata_cmd64x: active 10 recovery 10 setup 3.
[ 42.176870] ata2: soft resetting link
[ 42.355895] pata_cmd64x: active 3 recovery 1 setup 1.
[ 42.355923] pata_cmd64x: active 3 recovery 1 setup 1.
[ 42.379757] ata2.00: configured for MWDMA2
[ 42.380206] ata2: EH complete
[ 42.380290] scsi 1:0:0:0: scsi scan: 96 byte inquiry failed. Consider
BLIST_INQUIRY_36 for this device
[ 42.381094] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-H20N
C805 PQ: 0 ANSI: 5
[ 42.501845] sd 0:0:0:0: [sda] 30064608 512-byte logical blocks: (15.4
GB/14.3 GiB)
[ 42.502086] sd 0:0:0:0: [sda] Write Protect is off
[ 42.502107] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 42.502526] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 42.509234] sr 1:0:0:0: [sr0] scsi3-mmc drive: 8x/59x cd/rw xa/form2
cdda
[ 42.509258] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 42.515251] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 42.550665] sda: sda1 sda2 sda3 sda4
[ 42.563312] sd 0:0:0:0: [sda] Attached SCSI disk
[ 42.661390] ata_id[97]: unable to open '/dev/sr0'
[ 42.893291] ata_id[99]: unable to open '/dev/sr0'
[ 43.937688] random: fast init done
[ 43.978085] PM: Starting manual resume from disk
[ 43.979626] PM: Image not found (code -22)
[ 44.173378] aes_sparc64: sparc64 aes opcodes not available.
[ 44.198119] crc32c_sparc64: sparc64 crc32c opcode not available.
[ 44.889630] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 46.259178] random: crng init done
[ 47.629608] systemd[1]: systemd 238 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN
-PCRE2 default-hierarchy=hybrid)
[ 47.630172] systemd[1]: Detected architecture sparc64.
[ 47.657214] systemd[1]: Set hostname to <peeves>.
[ 49.852627] systemd[1]: Listening on udev Control Socket.
[ 49.855098] systemd[1]: Listening on Journal Socket (/dev/log).
[ 49.857904] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 49.859334] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 49.860441] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 49.860748] systemd[1]: Reached target Remote File Systems.
[ 49.861797] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 50.759186] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 52.916013] systemd-journald[161]: Received request to flush runtime
journal from PID 1
[ 54.831436] /pci@1f,0/pci@1,1/ebus@1/flashprom@10,0: OBP Flash, RD
1fff0000000[100000] WR 1fff0000000[100000]
[ 55.966250] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 55.968323] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 58.538287] Adding 489968k swap on /dev/sda4. Priority:-2 extents:1
across:489968k FS
[ 60.185069] EXT4-fs (sda1): mounting ext2 file system using the ext4
subsystem
[ 60.217607] EXT4-fs (sda1): mounted filesystem without journal. Opts:
(null)
[ 61.038249] hme 0000:01:01.1 eth0: renamed from enp1s1f1
[ 65.315506] eth0: Link is up using
[ 65.315519] internal
[ 65.315529] transceiver at
[ 65.315580] 100Mb/s, Full Duplex.
02:01.1 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1
Controller (rev 61)
02:01.2 USB controller: VIA Technologies, Inc. USB 2.0 (rev 63)
Best regards,
Fred
Reply to: