[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: console [tty0] enabled, bootconsole disabled while booting from disk after complete installation

Dear Lauer,

The output of command "lspci -v" cannot be taken as login into the server is not possible as older OS solaris was formatted or new OS linux is giving problem.

I will try to remove connected (unusual) extension boards in PCI slots and give you the log after that.

Thank you..

On Mon, Jul 14, 2014 at 1:20 PM, Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de> wrote:
Dear Shyam,

On Fri, Jul 11, 2014 at 09:47:17PM +0530, shyam prasad wrote:
> Im getting "sun/cassini.bin firmware file missing" error before the
> installation even after loading some firmware files through USB stick which
> Im using sun V890 server for installation.

If you are getting the V890 cassini running, it would be nice to
get the "lspci -v" from you. V480's dual gigabit cassinis are not running,
with me suspecting a chip hardware issue - see

Thanks and greetings

Netzwerkadministration/Zentrale Dienste, Interdiziplinaeres
Zentrum fuer wissenschaftliches Rechnen der Universitaet Heidelberg
IWR; INF 368; 69120 Heidelberg; Tel: (06221)54-8236 Fax: -5224
Email: Hermann.Lauer@iwr.uni-heidelberg.de

with regards,
k shyam prasad,
JTO,bbmp noc,

Reply to: