[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: v100 ethernet problems

On Sun, 2004-03-14 at 17:41, Marc Horowitz wrote:

> Problem 3: Full-duplex doesn't work right.  At boot, the interface
> autonegotiates to 100baseTx-HD.  If I use mii-tool to force it to full
> duplex, I see reduced throughput, and a transmit error on every packet
> is reported (but the packets are sent).
>                 Marc

My ultra2 did this when it was plugged into my old 10mbit switch(it went
to 10 hd) If I forced it to 10 fd, it barely worked.  Since I've gotten
a new 100mbit switch, I haven't had any problems

Reply to: