Re: XFree86 on Sunblade 150
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I have seen similar problems on an Ultra 5 when trying to use a TFT screen.
In my case the whole screen was very shakey and i couldnt mange to adjust the
screen to cope.
If your screen is a TFT (dont know is a SB150 is vga or not) try hitching up a
CRT.
On Tuesday 02 December 2003 20:58, Ryan Terry (MessEdUp) wrote:
> I am trying to configure X on a SunBlade 150.
>
> I am using the ati Mach64 server, and it is working enough to where I can
> get a desktop and I can set my resolution, and see things just fine.
>
> The problem I have is that the top 2 inches of the screen seem to "bend" to
> the right about a half inch. Other than this the X-Server seems to be
> running well.
>
> I have drawn up a VERY dirty sketch of what the screen looks like just to
> try to explain, it can be found here:
>
> http://www.violentsin.com/images/X-Distoreted.png
>
> Any help would be appreciated.
>
> MessEdUp
> MessEdUp@violentsin.com
> #clanvs on irc.gamesnet.net
> http://www.violentsin.com
> MessEdUpFMJ@hotmail.com (MSN IM)
- --
and thus ended my pointles ramblings.
David Leggett
david@asguard.org.uk
http://www.asguard.org.uk
http://www.site-control.org
Get my public GPG key from http://www.asguard.org.uk/~david/david.asc
Fingerprint: 432E 4EAD E1E5 26BB 29EB 47FA CBDE AB17 0D23 C76B
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQE/zShsy96rFw0jx2sRAsAQAJ9tz/q0i3fFxepN0V5n3ITUgjzODQCcCRt0
ezimNvcOs0XUEGwKfPIl4uU=
=ohNn
-----END PGP SIGNATURE-----
Reply to: