[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Problem booting Sun Blade 100 with Debian install media

Ben Collins wrote:
I hooked up a serial terminal instead. The kernel booted, but after the root file system was mounted there were no more messages, so I guess the installation program output is going somewhere else.

If you connect a serial cable, you must disconnect the keyboard.

which I did (or used console=ttya), but the point was that I got all the kernel messages on the serial terminal up to the point where the root filesystem was mounted, but I did not see anything from dbootstrap.


	Arne Nordmark		Tel: +46 8 - 790 71 92
	KTH/Mekanik		Fax: +46 8 - 723 04 75
	SE-100 44 STOCKHOLM	Internet: arne.nordmark@mech.kth.se

Reply to: