Fw: What choice for Type 6 keyboard
My mesage is below, someboday help please!
----- Original Message -----
From: "tclwrap" <tclwrap@worldnet.att.net>
To: <mlist-debiansparc@x-tec.de>; "Uwe A. P. Wuerdinger"
<wuerdinger@x-tec.de>
Sent: Sunday, August 18, 2002 11:52 PM
Subject: Re: What choice for Type 6 keyboard
> Hi:
>
> Newbye, I have a Blade 100 also and could not
> get a cd that installs debian correctly. I have the following cd's that
> failed (all SPARC versions and seem to contain
> vmlinux64 or something similar):
>
> Debian 2.2r2
> RedHat 6.2
> Mandrake 7.0
> Suse 7.0
>
> Most recently, I downloaded version 3.0 for UltraSPARC boot files and
could
> not get them to boot either (tried to boot from disk: boot disk
> /linux64/root.bin where I saved the files). Any advice?
>
> Thanks
> M. Baccar
>
> ----- Original Message -----
> From: <mlist-debiansparc@x-tec.de>; "Uwe A. P. Wuerdinger"
> <wuerdinger@x-tec.de>
> To: <debian-sparc@lists.debian.org>
> Sent: Sunday, August 18, 2002 11:34 PM
> Subject: Re: What choice for Type 6 keyboard
>
>
> > Thomas M Zambito wrote:
> > > On Thu, Aug 15, 2002 at 10:20:57AM -0500, Kent West wrote:
> >
> > Oh and make sure that there's a line
> > "none /proc/bus/usb usbdevfs defaults 0 0" in your /etc/fstab
> >
> > Here's the lsmod from my blade 100:
> > blacksun:~# /sbin/lsmod
> > Module Size Used by Tainted: P
> > netlink_dev 2192 0 (unused)
> > ipv6 159416 -1
> > smbfs 42848 0 (unused)
> > openpromfs 12584 0 (unused)
> > binfmt_misc 7600 1
> > usb-storage 58536 0 (unused)
> > usbmouse 2048 0 (unused)
> > hid 15568 0 (unused)
> > sbp2 15032 0 (unused)
> > raw1394 7296 0 (unused)
> > ohci1394 19864 0 (unused)
> > ieee1394 29664 0 [sbp2 raw1394 ohci1394]
> > nbd 20512 0 (unused)
> > lp 7816 0 (unused)
> > parport 31312 0 [lp]
> > evdev 3856 0 (unused)
> > trident 34632 0
> > ac97_codec 12248 0 [trident]
> > soundcore 4436 2 [trident]
> > solaris 45480 0 (unused)
> >
> > And my /etc/X11/XF86Config-4:
> >
> > Section "ServerLayout"
> > Identifier "XFree86 Configured"
> > Screen 0 "Screen0" 0 0
> > InputDevice "Mouse0" "CorePointer"
> > InputDevice "keyboard" "CoreKeyboard"
> > EndSection
> >
> > Section "Files"
> > FontPath "unix/:7100" # local font
> server
> > # if the local font server has problems, we can fall back on
> these
> > FontPath "/usr/lib/X11/fonts/misc"
> > FontPath "/usr/lib/X11/fonts/cyrillic"
> > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> > FontPath "/usr/lib/X11/fonts/Type1"
> > FontPath "/usr/lib/X11/fonts/Speedo"
> > FontPath "/usr/lib/X11/fonts/100dpi"
> > FontPath "/usr/lib/X11/fonts/75dpi"
> > EndSection
> >
> > Section "Module"
> > # Load "dbe"
> > # Load "dri"
> > # Load "extmod"
> > # Load "pex5"
> > # Load "record"
> > # Load "xie"
> > # Load "glx"
> > Load "GLcore"
> > Load "bitmap"
> > Load "dbe"
> > Load "ddc"
> > Load "dri"
> > Load "extmod"
> > Load "freetype"
> > Load "glx"
> > Load "int10"
> > Load "pex5"
> > Load "record"
> > Load "speedo"
> > Load "type1"
> > Load "vbe"
> > Load "xie"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "keyboard"
> > Driver "keyboard"
> > Option "XkbModel" "pc101"
> > Option "XkbLayout" "de"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Mouse0"
> > Driver "mouse"
> > Option "Protocol" "ImPS/2"
> > Option "Device" "/dev/input/mice"
> > EndSection
> >
> > Section "Monitor"
> > Identifier "Monitor0"
> > VendorName "Monitor Vendor"
> > ModelName "Monitor Model"
> > #HorizSync 31.5 - 82.0
> > #VertRefresh 40.0 - 100.0
> > HorizSync 30-68
> > VertRefresh 50-85
> > Option "DPMS"
> >
> > # Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250
> > +hsync +vsync
> > # Modeline "1280x1024" 135.00 1280 1312 1416 1664 1024 1027 1030 1064
> > # Modeline "1152x864" 135.00 1152 1464 1592 1776 864 864 876 908
> > # Modeline "1024x768" 115.50 1024 1068 1260 1440 768 771 781 802
> > -hsync -vsync
> > # Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -hsync
> > -vsync
> > # Modeline "800x600" 69.65 800 896 960 1156 600 744 750 800 -hsync
> > -vsync
> > # Modeline "640x480" 45.80 640 672 768 864 480 488 494 530 -hsync
> > -vsync
> > # Modeline "640x480" 45.80 640 680 776 896 480 600 606 646 -hsync
> > -vsync
> >
> > EndSection
> >
> > Section "Device"
> > Identifier "ATI RAGE"
> > Driver "ati"
> > VendorName "ATI"
> > BoardName "Mach64 GR"
> > ChipSet "ati"
> > ChipId 0x4752
> > ChipRev 0x27
> > BusID "PCI:0:19:0"
> > EndSection
> >
> > Section "Screen"
> > Identifier "Screen0"
> > Device "ATI RAGE"
> > Monitor "Monitor0"
> > DefaultDepth 24
> > SubSection "Display"
> > Depth 24
> > Modes "1024x768"
> > EndSubSection
> > EndSection
> >
> > Section "DRI"
> > Mode 0666
> > EndSection
> > #--------- end of /etc/X11/XF86Config-4 ---------
> >
> > Oh and I'm using a german mac usb keyboard layout ;-)
> >
> > greets Uwe
> > NP: The King - Smoke On The Water
> > --
> > X-Tec GmbH
> > Institute for Computer and Network Security
> > WWW : http://www.x-tec.de/
> >
> >
> >
> > --
> > To UNSUBSCRIBE, email to debian-sparc-request@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
> >
>
Reply to: