Re: What choice for Type 6 keyboard
Thomas M Zambito wrote:
On Thu, Aug 15, 2002 at 10:20:57AM -0500, Kent West wrote:
Oh and make sure that there's a line
"none /proc/bus/usb usbdevfs defaults 0 0" in your /etc/fstab
Here's the lsmod from my blade 100:
blacksun:~# /sbin/lsmod
Module Size Used by Tainted: P
netlink_dev 2192 0 (unused)
ipv6 159416 -1
smbfs 42848 0 (unused)
openpromfs 12584 0 (unused)
binfmt_misc 7600 1
usb-storage 58536 0 (unused)
usbmouse 2048 0 (unused)
hid 15568 0 (unused)
sbp2 15032 0 (unused)
raw1394 7296 0 (unused)
ohci1394 19864 0 (unused)
ieee1394 29664 0 [sbp2 raw1394 ohci1394]
nbd 20512 0 (unused)
lp 7816 0 (unused)
parport 31312 0 [lp]
evdev 3856 0 (unused)
trident 34632 0
ac97_codec 12248 0 [trident]
soundcore 4436 2 [trident]
solaris 45480 0 (unused)
And my /etc/X11/XF86Config-4:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "keyboard" "CoreKeyboard"
EndSection
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
# Load "dbe"
# Load "dri"
# Load "extmod"
# Load "pex5"
# Load "record"
# Load "xie"
# Load "glx"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xie"
EndSection
Section "InputDevice"
Identifier "keyboard"
Driver "keyboard"
Option "XkbModel" "pc101"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
#HorizSync 31.5 - 82.0
#VertRefresh 40.0 - 100.0
HorizSync 30-68
VertRefresh 50-85
Option "DPMS"
# Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250
+hsync +vsync
# Modeline "1280x1024" 135.00 1280 1312 1416 1664 1024 1027 1030 1064
# Modeline "1152x864" 135.00 1152 1464 1592 1776 864 864 876 908
# Modeline "1024x768" 115.50 1024 1068 1260 1440 768 771 781 802
-hsync -vsync
# Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -hsync
-vsync
# Modeline "800x600" 69.65 800 896 960 1156 600 744 750 800 -hsync
-vsync
# Modeline "640x480" 45.80 640 672 768 864 480 488 494 530 -hsync
-vsync
# Modeline "640x480" 45.80 640 680 776 896 480 600 606 646 -hsync
-vsync
EndSection
Section "Device"
Identifier "ATI RAGE"
Driver "ati"
VendorName "ATI"
BoardName "Mach64 GR"
ChipSet "ati"
ChipId 0x4752
ChipRev 0x27
BusID "PCI:0:19:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI RAGE"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
#--------- end of /etc/X11/XF86Config-4 ---------
Oh and I'm using a german mac usb keyboard layout ;-)
greets Uwe
NP: The King - Smoke On The Water
--
X-Tec GmbH
Institute for Computer and Network Security
WWW : http://www.x-tec.de/
Reply to: