[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: New sun4u kernel images



Hi Ben,

On Tue, 19 Jun 2001, Ben Collins wrote:

> These images are based off of the latest Vger CVS. Also, they've been
> compiled with the old trusty egcs64 since it seems there is atleast one
> case of gcc-3.0-sparc64 causing a failure on an E250(or was it E450?).

	E250 in my case. :-)

> Anyway, if you had unexplained boot failures from the previous images,
> please try these.
> 
> Let me know how they do, and I'll get a new set of boot images using
> these soon.

	All sorted. I've just booted our E250 with your new images and the
	system is up and running. I'll let you know if there are any issues
	over time.

	I noticed at install time though, there were some unresolved symbols:

< dpkg -i kernel-image-2.4.5-sun4u-smp_11_sparc.deb 
(Reading database ... 84579 files and directories currently installed.)
Unpacking kernel-image-2.4.5-sun4u-smp (from
kernel-image-2.4.5-sun4u-smp_11_sparc.deb) ...
Setting up kernel-image-2.4.5-sun4u-smp (11) ...
depmod: *** Unresolved symbols in /lib/modules/2.4.5/kernel/drivers/net/hp100.o

	This is some network card ? (that we here musn't have) -
	and also that the image itself in /boot didn't have -sun4u on the end
	of it (like the other kernel packages) but that's nitty gritty stuff :)

	Looks great so far. dmesg is attached. Thanks for your help.

	Cheers,

	Marcus

-- 
        .....
     ,,$$$$$$$$$,      Marcus Crafter
    ;$'      '$$$$:    Computer Systems Engineer
    $:         $$$$:   Open Software Associates GmbH
     $       o_)$$$:   82-84 Mainzer Landstrasse
     ;$,    _/\ &&:'   60327 Frankfurt Germany
       '     /( &&&
           \_&&&&'     Email : Marcus.Crafter@osa.de
          &&&&.        Business Hours : +49 69 9757 200
    &&&&&&&:           After Hours    : +49 69 49086750
PROMLIB: Sun IEEE Boot Prom 3.16.1 1999/04/19 07:55
Linux version 2.4.5 (root@vore) (gcc version egcs-2.92.11 19980921 (gcc2 ss-980609 experimental)) #1 SMP Tue Jun 19 11:42:35 EDT 2001
ARCH: SUN4U
Ethernet address: 08:00:20:cf:ca:97
On node 0 totalpages: 130485
zone(0): 130918 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f00845d0,mid=0)
Found CPU 1 (node=f008493c,mid=1)
Found 2 CPU prom device tree node(s).
Kernel command line: root=/dev/sda1 ro
Calibrating delay loop... 799.53 BogoMIPS
Memory: 1026464k available (1952k kernel code, 488k data, 192k init) [fffff80000000000,000000003fecc000]
Dentry-cache hash table entries: 131072 (order: 8, 2097152 bytes)
Inode-cache hash table entries: 65536 (order: 7, 1048576 bytes)
Mount-cache hash table entries: 16384 (order: 5, 262144 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 524288 bytes)
Page-cache hash table entries: 131072 (order: 7, 1048576 bytes)
POSIX conformance testing by UNIFIX
Entering UltraSMPenguin Mode...
SMP: Calibrating ecache flush... Using heuristic of 1485941 cycles.
Calibrating delay loop... 799.53 BogoMIPS
Total of 2 processors activated (1599.07 BogoMIPS).
PCI: Probing for controllers.
PCI: Found PSYCHO, control regs at 000001fe00000000
PSYCHO: Shared PCI config space at 000001fe01000000
PCI0(PBMB): Bus running at 33MHz
PCI0(PBMA): Bus running at 66MHz
ebus0: [auxio] [power] [SUNW,pll] [sc] [se] [se] [su] [su] [ecpp] [eeprom] [flashprom] [SUNW,envctrltwo]
PCIO serial driver version 1.50
su(mouse) at 0x1fff13062f8 (irq = 4,7ea) is a 16550A
Sun Mouse-Systems mouse driver version 1.00
su(kbd) at 0x1fff13083f8 (irq = 9,7e9) is a 16550A
keyboard: not present
SAB82532 serial driver version 1.62
ttyS00 at 0x1fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
ttyS01 at 0x1fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
Console: ttyS0 (SAB82532)
power: Control reg at 000001fff1724000 ... powerd running.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
rtc_init: no PC rtc found
block: queued sectors max/low 680053kB/548981kB, 2048 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
sunhme.c:v1.99 12/Sep/99 David S. Miller (davem@redhat.com)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:cf:ca:97 
PPP generic driver version 2.4.1
Linux video capture interface: v1.00
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 940M
agpgart: no supported devices found.
SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 3, function 0
sym53c8xx: 53c875 detected 
sym53c8xx: at PCI bus 0, device 3, function 1
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875 detected 
sym53c875-0: rev 0x14 on pci bus 0 device 3 function 0 irq 3,7e0
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-1: rev 0x14 on pci bus 0 device 3 function 1 irq 3,7e6
sym53c875-1: ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.3a-20010304
scsi1 : sym53c8xx-1.7.3a-20010304
  Vendor: SEAGATE   Model: ST336704LSUN36G   Rev: 032C
  Type:   Direct-Access                      ANSI SCSI revision: 03
  Vendor: HP        Model: C1537A            Rev: L706
  Type:   Sequential-Access                  ANSI SCSI revision: 02
  Vendor: TOSHIBA   Model: DVD-ROM SD-M1401  Rev: 1007
  Type:   CD-ROM                             ANSI SCSI revision: 02
  Vendor: SEAGATE   Model: ST336704LSUN36G   Rev: 032C
  Type:   Direct-Access                      ANSI SCSI revision: 03
Detected scsi tape st0 at scsi0, channel 0, id 5, lun 0
st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16.
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Detected scsi disk sdb at scsi0, channel 0, id 8, lun 0
sym53c875-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 16)
SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB)
Partition check:
 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sym53c875-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 16)
SCSI device sdb: 71132959 512-byte hdwr sectors (36420 MB)
 sdb: sdb1 sdb3
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
sym53c875-0-<6,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 16)
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 11:48:40 Jun 19 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
usb-ohci.c: v5.2:USB OHCI Host Controller Driver
usb.c: registered new driver hid
hid.c: v1.16:USB HID support drivers
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP: Hash tables configured (established 65536 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 2046840k swap-space (priority -1)
eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex.

Reply to: