Re: Serial PCI ports
> > > > > PCIO serial driver version 1.18.2.6
> > > > > su(serial) at 0xfffff9fff13803f8 (tty 0 irq 6,7dc) is a 16550A
> > > > > su(serial) at 0xfffff9fff13602f8 (tty 1 irq 6,7d4) is a 16550A
> > > >
> > > > Hmm, for some reason it doesn't look like the serial is configured
> > > > completely. On my system I get this:
> > > >
> > > > PCIO serial driver version 1.18.2.5
> > > > su(serial) at 0xfffff9fff13803f8 (tty 0 irq 6,7dc) is a 16550A
> > > > su(serial) at 0xfffff9fff13602f8 (tty 1 irq 4,7dd) is a 16550A
> > > > SAB82532 serial driver version 1.30.2.2
> > > > ttyS00 at 0x1fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
> > > > ttyS01 at 0x1fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
> > > > Console: ttyS0 (SAB82532)
> > > >
> > > > Which version of boot-floppies are you using?
> > >
> > > I have tried several, but the log is from 2.2.13.
> >
> > Can you be more specific on which ones you have tried? Did you try the
> > 2.2.15 images at:
> >
> > http://auric.debian.org/~bcollins/disk-sparc/current/
> >
> > This would help a lot in pinpointing the initialization problem.
> >
>
> 2.2.15 -> same problem.
>
> 2.2.12 -> Does not start, error message "no kernel".
>
> I am using the sun4u image ( maybe goes without saying? ).
I have managed to install some modules by skipping the initial
base-config ( that fails due to lack of serial ports ).
Im suspecting that my CP 1500 has some special interface towards
the serial ports.
Can someone tell me if it possible to get the serial ports
working?
The serial ports should go through the "advanced PCI bridge".
Here is what i get from lspci:
------------
# lspci -v
00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi
Flags: bus master, 66Mhz, medium devsel, latency 40
00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge
(rev 11) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 40
Bus: primary=00, secondary=02, subordinate=ff, sec-latency=40
I/O behind bridge: 00000000-00000fff
Memory behind bridge: 00000000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge
(rev 11) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 40
Bus: primary=00, secondary=01, subordinate=01, sec-latency=40
I/O behind bridge: 00000000-00000fff
Memory behind bridge: 00000000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
Flags: bus master, medium devsel, latency 64
Memory at fffff9fff0000000 (32-bit, non-prefetchable)
Memory at fffff9fff1000000 (32-bit, non-prefetchable)
01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
Flags: bus master, medium devsel, latency 64, IRQ 6917536
Memory at fffff9ffe0000000 (32-bit, non-prefetchable)
Expansion ROM at 00000000e1000000 [disabled]
01:02.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev
04)
Flags: bus master, medium devsel, latency 80, IRQ 6917504
I/O ports at 2c00000
Memory at fffff9ffe0008000 (32-bit, non-prefetchable)
Memory at fffff9ffe000a000 (32-bit, non-prefetchable)
01:03.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
Flags: medium devsel
Memory at 0000000030000000 (32-bit, non-prefetchable) [disabled]
Memory at 00000000f1000000 (32-bit, non-prefetchable) [disabled]
01:03.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
Flags: bus master, medium devsel, latency 64, IRQ 6917312
Memory at fffff9ffe0010000 (32-bit, non-prefetchable)
Expansion ROM at 00000000e2000000 [disabled]
02:01.0 PCI bridge: Digital Equipment Corporation DECchip 21150 (rev 04)
(prog-if 00 [Normal decode])
Flags: bus master, medium devsel, latency 0
Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
Capabilities: [dc] Power Management version 1
----------
And here is another one:
----------
# lspci -vv
00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 40 set
00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge
(rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 40 set, cache line size 10
Bus: primary=00, secondary=02, subordinate=ff, sec-latency=40
I/O behind bridge: 00000000-00000fff
Memory behind bridge: 00000000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge
(rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 40 set, cache line size 10
Bus: primary=00, secondary=01, subordinate=01, sec-latency=40
I/O behind bridge: 00000000-00000fff
Memory behind bridge: 00000000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 10 min, 25 max, 64 set, cache line size 10
Region 0: Memory at fffff9fff0000000 (32-bit, non-prefetchable)
Region 1: Memory at fffff9fff1000000 (32-bit, non-prefetchable)
01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 10 min, 5 max, 64 set, cache line size 10
Interrupt: pin ? routed to IRQ 6917536
Region 0: Memory at fffff9ffe0000000 (32-bit, non-prefetchable)
Expansion ROM at 00000000e1000000 [disabled]
01:02.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev
04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 17 min, 64 max, 80 set, cache line size 10
Interrupt: pin A routed to IRQ 6917504
Region 0: I/O ports at 2c00000
Region 1: Memory at fffff9ffe0008000 (32-bit, non-prefetchable)
Region 2: Memory at fffff9ffe000a000 (32-bit, non-prefetchable)
01:03.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 0000000030000000 (32-bit, non-prefetchable)
[disabled]
Region 1: Memory at 00000000f1000000 (32-bit, non-prefetchable)
[disabled]
01:03.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 10 min, 5 max, 64 set, cache line size 10
Interrupt: pin B routed to IRQ 6917312
Region 0: Memory at fffff9ffe0010000 (32-bit, non-prefetchable)
Expansion ROM at 00000000e2000000 [disabled]
02:01.0 PCI bridge: Digital Equipment Corporation DECchip 21150 (rev 04)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 set, cache line size 10
Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Reply to: