Re: Serial PCI ports

[Thomas Lange <erathom@kieray1.p.y.ki.era.ericsson.se>]

> > > > PCIO serial driver version 1.18.2.6
> > > > su(serial) at 0xfffff9fff13803f8 (tty 0 irq 6,7dc) is a 16550A
> > > > su(serial) at 0xfffff9fff13602f8 (tty 1 irq 6,7d4) is a 16550A
> > > 
> > > Hmm, for some reason it doesn't look like the serial is configured
> > > completely. On my system I get this:
> > > 
> > >   PCIO serial driver version 1.18.2.5
> > >   su(serial) at 0xfffff9fff13803f8 (tty 0 irq 6,7dc) is a 16550A
> > >   su(serial) at 0xfffff9fff13602f8 (tty 1 irq 4,7dd) is a 16550A
> > >   SAB82532 serial driver version 1.30.2.2
> > >   ttyS00 at 0x1fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
> > >   ttyS01 at 0x1fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
> > >   Console: ttyS0 (SAB82532)
> > > 
> > > Which version of boot-floppies are you using?
> > 
> > I have tried several, but the log is from 2.2.13.
> 
> Can you be more specific on which ones you have tried? Did you try the
> 2.2.15 images at:
> 
> http://auric.debian.org/~bcollins/disk-sparc/current/
> 
> This would help a lot in pinpointing the initialization problem.
> 

2.2.15 -> same problem.

2.2.12 -> Does not start, error message "no kernel".

I am using the sun4u image ( maybe goes without saying? ).

/Thomas Lange/