Bug#710078: hplip: LaserJet1018 doesn't work
Package: hplip
Version: 3.13.4-1
Severity: serious
Dear Maintainer,
My printer LaserJet1018 works no more with latest hplip package.
Printer can be detected and setup via hp-setup just nicely, but for any
job (incl. test page) I get:
stopped
"/usr/lib/cups/filter/hpcups failed"
Also, when I reboot with my printer plugged-in, my system doesn't boot.
This is I believe the relevant part from /var/log/messages:
May 28 08:42:09 sol kernel: [ 26.243235] lp: driver loaded but no devices found
May 28 08:42:09 sol kernel: [ 26.273256] ppdev: user-space parallel port driver
May 28 08:46:22 sol kernel: [ 278.743066] usb 1-1.2: USB disconnect, device number 3
May 28 08:46:41 sol hp-probe: hp-probe[5284]: warning: hp-probe should not be run as root/superuser.
May 28 08:46:48 sol kernel: [ 304.274112] usb 2-1.1: new high-speed USB device number 4 using ehci_hcd
May 28 08:46:48 sol kernel: [ 304.386512] usb 2-1.1: New USB device found, idVendor=03f0, idProduct=4117
May 28 08:46:48 sol kernel: [ 304.386519] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 28 08:46:48 sol kernel: [ 304.386524] usb 2-1.1: Product: HP LaserJet 1018
May 28 08:46:48 sol kernel: [ 304.386528] usb 2-1.1: Manufacturer: Hewlett-Packard
May 28 08:46:48 sol kernel: [ 304.386531] usb 2-1.1: SerialNumber: KP3FK5P
May 28 08:46:48 sol kernel: [ 304.389903] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
May 28 08:46:48 sol logger: loading hp_laserjet_1018 firmware 002 004
May 28 08:46:48 sol hp-firmware: hp-firmware[5293]: warning: No display found.
May 28 08:46:51 sol kernel: [ 307.498939] usblp0: removed
May 28 08:47:19 sol hp-setup: hp-setup[5325]: warning: Qt/PyQt 4 initialization failed.
May 28 08:47:52 sol hp-testpage: hp-testpage[5378]: warning: hp-testpage should not be run as root/superuser.
May 28 08:47:52 sol hp-testpage: hp-testpage[5378]: warning: Qt/PyQt 4 initialization failed.
May 28 08:48:22 sol hp-firmware: hp-firmware[5427]: warning: Qt/PyQt 4 initialization failed.
I'm ready to provide any additional info,
Andrey Paramonov
-- Package-specific info:
Saving output in log file: /home/pent/hp-check.log
HP Linux Imaging and Printing System (ver. 3.13.4)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before
compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if
the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a
distro supplied package (.deb, .rpm, etc) or an already built HPLIP
supplied tarball has the proper dependencies installed to successfully
run.
3. Both compile- and run-time check mode (-b or --both) (Default): This
mode will check both of the above cases (both compile- and run-time
dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run
time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: debian-testing version is not supported. Using debian-6.0.7 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2 GNU/Linux
Host: sol
Proc: 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2 GNU/Linux
Distribution: debian testing
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.13.4
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian distro testing version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.13.4
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.13.4
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.12.11
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/usb/HP_LaserJet_1018?serial=KP3FK5P
printer_name = LaserJet1018
[installation]
date_time = 28.05.2013 09:05:31
version = 3.13.4
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
gs Ghostscript REQUIRED 7.05 9.05 OK -
network Network-wget OPTIONAL - 1.14 OK -
error: dbus DBus REQUIRED - 1.6.10 MISSING 'DBUS may not be installed or not running'
scanimage Shell-Scanning OPTIONAL 1.0 1.0.22 OK -
policykit Admin-Policy-framework OPTIONAL - 0.105 OK -
error: xsane SANE-GUI OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
error: cups CUPS REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
-------------------------
| General Dependencies |
-------------------------
reportlab Python-PDF-Lib OPTIONAL 2.0 2.5 OK -
error: libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 MISSING 'libcrypto needs to be installed'
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
error: pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 - MISSING 'pyqt4-dbus needs to be installed'
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.17 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
error: python-devel Python-SDK REQUIRED 2.2 2.7.5 MISSING 'python-devel needs to be installed'
error: pyqt4 Python-Qt4 REQUIRED 4.0 - MISSING -
error: cups-devel CUPS-SDK REQUIRED - - MISSING 'cups-devel needs to be installed'
error: sane-devel SANE-SDK REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libusb USB-Lib REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane Scan-Lib REQUIRED - - OK -
error: cups-image CUPS-Image-Lib REQUIRED - - MISSING 'cups-image needs to be installed'
error: libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.4.3 MISSING 'libnetsnmp-devel needs to be installed'
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.13.4 OK -
pcardext PhotoCard-Extension REQUIRED - 3.13.4 OK -
hpmudext IO-Extension REQUIRED - 3.13.4 OK -
-----------------------
| Scan Configuration |
-----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.13.4 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.13.4 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `v4l:/dev/video0' is a Noname WebCam SC-03FFL11739P virtual device
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
---------------------------- ----------------
hp:/usb/HP_LaserJet_1018?ser HP LaserJet 1018
ial=KP3FK5P
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
LaserJet1018
------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_1018?serial=KP3FK5P
PPD: /etc/cups/ppd/LaserJet1018.ppd
PPD Description: HP LaserJet 1018, hpcups 3.13.4, requires proprietary plugin
Printer status: printer LaserJet1018 is idle. enabled since Вт 28 май 2013 08:59:10 ready to print
warning: plug-in status: Version mismatch
Communication status: Good
--------------
| PERMISSION |
--------------
error: groups user-groups Required - - MISSING lp,lpadmin
USB LaserJet1018 Required - - OK Node:'/dev/bus/usb/001/004' Perm:' root lp --t rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libcups2' package is missing/incompatible
error: 'libssl-dev' package is missing/incompatible
error: 'python-qt4-dbus' package is missing/incompatible
error: 'python-dev' package is missing/incompatible
error: 'python-qt4' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libcupsimage2' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'xsane' package is missing/incompatible
Plug-in Status
--------------
error: Plug-ins need to be installed
USER GROUPS
-----------
error: lp,lpadmin groups need to be added for pent user
Total Errors: 13
Total Warnings: 1
Re-run 'hp-doctor' command to prompt and fix the issues.
Done.
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (1000, 'testing'), (200, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages hplip depends on:
ii adduser 3.113+nmu3
ii coreutils 8.13-3.5
ii cups 1.5.3-5
ii hplip-data 3.13.4-1
ii libc6 2.17-3
ii libcups2 1.5.3-5
ii libdbus-1-3 1.6.10-1
ii libhpmud0 3.13.4-1
ii libsane 1.0.22-7.4
ii libsane-hpaio 3.13.4-1
ii libsnmp15 5.4.3~dfsg-3
ii libssl1.0.0 1.0.1e-2
ii libusb-1.0-0 2:1.0.15-1
ii lsb-base 4.1+Debian11
ii policykit-1 0.105-3
ii printer-driver-hpcups 3.13.4-1
ii python 2.7.3-5
ii python-dbus 1.2.0-1
ii python-gobject-2 2.28.6-12+b1
ii python-imaging 1.1.7-4
ii python-pexpect 2.4-1
ii python-reportlab 2.5-1.1
ii wget 1.14-1
Versions of packages hplip recommends:
ii avahi-daemon 0.6.31-2
ii printer-driver-postscript-hp 3.13.4-1
ii sane-utils 1.0.22-7.4
Versions of packages hplip suggests:
pn hplip-doc <none>
pn hplip-gui <none>
ii python-notify 0.1.1-3
pn system-config-printer <none>
-- no debconf information
Reply to: