Bug#352142: HP 1320 quit working except when set to "Save Toner" mode
On Tue, 14 Feb 2006, Roger Leigh wrote:
> Henrique de Moraes Holschuh <hmh@debian.org> writes:
> > On Mon, 13 Feb 2006, Jeffery von Ronne wrote:
> >> Feb 13 13:59:52 localhost kernel: drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -2
> >> Feb 13 13:59:52 localhost kernel: drivers/usb/class/usblp.c: usblp0: error -2 reading from printer
> >> Feb 13 14:00:08 localhost kernel: drivers/usb/class/usblp.c: usblp0: error = -110 setting HP channel
> >
> > This is bad. Which kernel? I recall older kernels were fubar and they
> > caused those errors to show up, but that was at 2.6.12 or thereabouts, I
> > think.
> >
> >> Feb 13 14:01:05 localhost kernel: usb 5-1.3.1.1: new full speed USB device using ehci_hcd and address 14
> >
> > 1.3.1.1? Do you have an USB hub in the way? Try connecting the printer
> > directly to the computer, just in case. Good USB2.0 hubs are hard to come
> > by.
>
> This reminded me I actually have this problem when I hook up printers
> through the USB 2.0 hub in my Apple Cinema Display. usb-storage and
> usb-hid devices are OK, however.
>
> Shall I reassign to hplip, BTW?
I suppose, but please retitle and reopen the bug while at it.
--
"One disk to rule them all, One disk to find them. One disk to bring
them all and in the darkness grind them. In the Land of Redmond
where the shadows lie." -- The Silicon Valley Tarot
Henrique Holschuh
Reply to: