Bug#352142: HP 1320 quit working except when set to "Save Toner" mode
On Mon, Feb 13, 2006 at 05:51:55PM -0600, Jeffery von Ronne wrote:
> But the strange thing is, that I just rebooted to see if I could produce
> a clean syslog. With just a print failure, and now I can't reproduce the
> problem. I can use hp:/usb/hp_LaserJet_1320_series?device=/dev/usb/lp0
> with the foomatic PPD and it just works even in high quality duplex.
> So I can't reproduce the problem anymore.
I spoke too soon. The test page started working, but then when I went to
print out a few pages from a PDF document using the hp: Driver URL
and it "crashed" the printer again. The same document worked fine
with the standard USB URL.
My printer is blinking the toner low light? Do you think it could be
trying to signal that information to hplid and that's part of the
problem?
The syslog messages for an episode look like:
[turn on the printer]
Feb 13 18:02:25 localhost kernel: usb 5-1.3.1.1: new full speed USB device using ehci_hcd and address 10
Feb 13 18:02:25 localhost kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1D17
[try to print something]
Feb 13 18:03:42 localhost kernel: drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -2
Feb 13 18:03:42 localhost kernel: drivers/usb/class/usblp.c: usblp0: error -2 reading from printer
Feb 13 18:03:53 localhost hpiod: unexpected MLCCreditRequest: cmd=4, hid=2, pid=2, credit=65535: io/hpiod/mlc.cpp 129
Feb 13 18:03:58 localhost kernel: drivers/usb/class/usblp.c: usblp0: error = -110 setting HP channel
Feb 13 18:04:35 localhost hpiod: unable to read uri:hp:/usb/hp_LaserJet_1320_series?device=/dev/usb/lp0 Device::DeviceID: Input/output error
Feb 13 18:04:35 localhost lp0: INFO: open device failed; will retry in 30 seconds...
Feb 13 18:05:18 localhost hpiod: unable to read uri:hp:/usb/hp_LaserJet_1320_series?device=/dev/usb/lp0 Device::DeviceID: Input/output error
Feb 13 18:05:18 localhost lp0: INFO: open device failed; will retry in 30 seconds...
[repeats many times]
[turn off printer]
Feb 13 18:08:35 localhost hpiod: unable to read uri:hp:/usb/hp_LaserJet_1320_series?device=/dev/usb/lp0 Device::DeviceID: Input/output error
Feb 13 18:08:35 localhost kernel: drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -32
Feb 13 18:08:36 localhost lp0: INFO: open device failed; will retry in 30 seconds...
Feb 13 18:09:05 localhost hpiod: unable to read uri:hp:/usb/hp_LaserJet_1320_series?device=/dev/usb/lp0 Device::DeviceID: Input/output error
Feb 13 18:09:05 localhost kernel: drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -32
Feb 13 18:09:05 localhost lp0: INFO: open device failed; will retry in 30 seconds...
Feb 13 18:09:26 localhost kernel: usb 5-1.3.1.1: USB disconnect, address 10
Feb 13 18:09:26 localhost kernel: drivers/usb/class/usblp.c: usblp0: removed
Feb 13 18:09:35 localhost hpiod: unable to Device::Open hp:/usb/hp_LaserJet_1320_series?device=/dev/usb/lp0: No such file or directory
--
Jeffery von Ronne
Assistant Professor
Department of Computer Science
University of Texas at San Antonio
Reply to: