Re: HELP: test kernel patches on the real thing -- installs but won't reboot after install...
On Apr 28, 2015, at 3:56 AM, Rick Thomas <rbthomas@pobox.com> wrote:
>
> On Apr 27, 2015, at 4:22 PM, Rick Thomas <rbthomas@pobox.com> wrote:
>> On 4/27/2015 1:46 PM, Milan Kupcevic wrote:
>>> On 04/27/2015 04:21 PM, Rick Thomas wrote:
>>>> I have a dual processor G5 tower Mac that has the “wind tunnel”
>>>> problem.
>>> Do you have this problem with the final Jessie release?
>>> Milan
>> I haven't tried Jessie final release on it yet. I'll give it a shot tonight.
>> Enjoy!
>> Rick
>
> I tried installing jessie final on it. The installer runs OK to completion but when it comes time to reboot into the installed system, I get “Loading second stage bootloader…” and a folder icon with a blinking “?” in the middle.
>
> I tried booting from the DVD in “rescue” mode and installing the bootstrap again from the rescue menu. No help…
>
> The machine in question is a Power Mac dual core G5 similar to the one shown on this web page —
> http://www.everymac.com/systems/apple/powermac_g5/specs/powermac_g5_dual_2.0.html
>
> Also, the installer seemed to have trouble getting an IPv4 dhcp address (though it does fine at getting an IPv6 address from the local router — so it looks like there’s no problem with the network hardware.)
>
> I’ve had wheezy installed and running happily on this machine recently.
So… I installed Wheezy on the G5 and immediately did a dist-upgrade to Jessie. This time it boots without incident.
With Jessie installed this way, it doesn’t go into “leaf-blower” mode.
In case it helps, here’s a sample from the output of “lsmod” —
root@bigal:~# lsmod | grep i2c
i2c_algo_bit 7980 1 nouveau
root@bigal:~# lsmod | grep wind
windfarm_cpufreq_clamp 2781 1
windfarm_smu_sensors 6735 1
windfarm_smu_controls 7094 7
windfarm_pm112 13304 0
windfarm_pid 2683 1 windfarm_pm112
windfarm_max6690_sensor 3455 1
windfarm_lm75_sensor 3989 1
windfarm_smu_sat 7056 5 windfarm_pm112
windfarm_core 11593 7 windfarm_cpufreq_clamp,windfarm_pm112,windfarm_smu_sensors,windfarm_smu_sat,windfarm_lm75_sensor,windfarm_max6690_sensor,windfarm_smu_controls
Does this help?
Rick
PS: If you’re interested in chasing down the “IPv4 dhcp doesn’t work” problem, I can provide logs from both the G5 dhcp client and the dhcp server (using dnsmasq).
Reply to: