Re: sound problem ibook g4
Dear Risto, I took your alsa drivers and installed them after changing to the stock kernel
> To run exactly the same driver:
> 1) install stock kernel for squeeze:
> linux-image-2.6.32-5-powerpc (2.6.32-31)
> 2) install my driver package:
> http://ristosu.wippiespace.com/pub/alsa-modules-2.6.32-5-powerpc_1.0.23+dfsg-2+2.6.32-31_powerpc.deb
>
> To 'refresh' your alsa driver, you could try to remove (or
> rename)
> /var/lib/alsa/asound.state.
>
> Risto
I have installed the stock squeeze kernel
i then rebooted into it and then installed your driver bundle
i then rebooted
then i ran my sound programs and get the error sounds (scratchy sounds)
both from cat tech.au > /dev/audio as well as mpg321 file.mp3
then i run
lsmod |grep snd
snd_aoa_i2sbus 20569 0
snd_powermac 59327 0
snd_pcm_oss 42895 0
snd_mixer_oss 19506 1 snd_pcm_oss
snd_pcm 66254 3 snd_aoa_i2sbus,snd_powermac,snd_pcm_oss
snd_page_alloc 8925 1 snd_pcm
snd_seq_oss 32715 0
snd_seq_midi_event 7956 1 snd_seq_oss
snd_seq 51925 4 snd_seq_oss,snd_seq_midi_event
snd_timer 21072 2 snd_pcm,snd_seq
snd_seq_device 8629 2 snd_seq_oss,snd_seq
snd 52951 9 snd_aoa_i2sbus,snd_powermac,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
soundcore 8003 1 snd
snd_aoa_soundbus 6669 1 snd_aoa_i2sbus
mlaks@B1:~$
as well as
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23.
Compiled on Apr 17 2011 for kernel 2.6.32-5-powerpc.
mlaks@B1:~$ dpkg -l |grep alsa
ii alsa-base 1.0.23+dfsg-3 ALSA driver configuration files
ii alsa-firmware-loaders 1.0.23-3+b1 ALSA software loaders for specific hardware
ii alsa-modules-2.6.32-5-powerpc 1.0.23+dfsg-2+2.6.32-31 ALSA modules for kernel 2.6.32-5-powerpc
ii alsa-source 1.0.23+dfsg-3 ALSA driver sources
ii alsa-utils 1.0.23-3 Utilities for configuring and using ALSA
ii gstreamer0.10-alsa 0.10.30-1 GStreamer plugin for ALSA
ii libsdl1.2debian-alsa 1.2.14-6.1 Simple DirectMedia Layer (with X11 and ALSA options)
mlaks@B1:~$ aplay -lL
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=Snapper
PowerMac Snapper, PowerMac Snapper
Default Audio Device
front:CARD=Snapper,DEV=0
PowerMac Snapper, PowerMac Snapper
Front speakers
**** List of PLAYBACK Hardware Devices ****
card 0: Snapper [PowerMac Snapper], device 0: PMac Snapper [PowerMac Snapper]
Subdevices: 1/1
Subdevice #0: subdevice #0
any ideas ??? :( :(
Reply to: