[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Mini Mac X.Org Issue on Debian 6



Hi Everyone,

I've just done a fresh install of Debian 6 on my PPC Mini Mac and for the life of me cannot get X up and running. The Mac is connected to my TV via VGA through a DVI-to-VGA adapter (no DVI on my TV) and the screen just keeps flicking on and off.

When I installed Debian 5 everything just worked with config straight after install, so I never had to troubleshoot. I've reinstalled Debian 5 just to make sure it did just work and GDM came straight up. Both include the radeon driver which I believe is the correct one for the Radeon 9200 in the Mac.

I've attached both configs from 5 & 6, from my limited understanding I cannot see much difference. When diffing the configs there are quite a few more options in the config but most are disabled I think.

The last message I see when running X with either config is "Leaving Restore TV" and when generating the config the errors below are shown:

Bus error at address 0x481777000
Fatal Server Error
Caught Signal 7 (Bus Error). Server aborting

Debian 5 was running  X.org X server 1.4.2 and 6 is running 1.7.7.

I believe this is down to some kind of refresh rate issue (at least from what I've googled) so I tried to manually generate the mode lines for my using the following link http://xtiming.sourceforge.net/cgi-bin/xtiming.pl but it made no difference regardless of what resolution I choose that my TV lists as supported.

Has anyone else run into this and can offer some insight?

Thanks in advance

Lee


      
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/etc/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "GLcore"
	Load  "dbe"
	Load  "record"
	Load  "xtrap"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "DDCMode"            	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "MacModel"           	# <str>
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "RV280 [Radeon 9200]"
	BusID       "PCI:0:16:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath     "built-ins"
EndSection

Section "Module"
	Load  "extmod"
	Load  "dbe"
	Load  "record"
	Load  "dri2"
	Load  "dri"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "CustomEDID"         	# [<str>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ClockGating"        	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "MacModel"           	# <str>
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
        #Option     "EXAVSync"           	# [<bool>]
        #Option     "ATOMTVOut"          	# [<bool>]
        #Option     "R4xxATOM"           	# [<bool>]
        #Option     "ForceLowPowerMode"  	# [<bool>]
        #Option     "DynamicPM"          	# [<bool>]
        #Option     "NewPLL"             	# [<bool>]
        #Option     "ZaphodHeads"        	# <str>
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "RV280 [Radeon 9200]"
	BusID       "PCI:0:16:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection


Reply to: